Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹49,330
Closing Date
21 Apr 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
RDSO
Expenditure
General
P09
2 conditions
Procurement of this item will be done from the approved and developmental vendors of RDSO item ID 3100432 of RDSO's Vendor Directory. Status of approval of tenderer shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of downgrading/ removal/ suspension/ banning. Eligibility requirement for Approved and Developmental vendors of RDSO will be as follows: (i) Railway reserves the right to order either the entire or the bulk quantity on the RDSO Approved sources for RDSO Item ID: 3100432. (ii) Vendors approved under developmental category for RDSO Item ID: 3100432 will be eligible for cumulative developmental order/orders for upto 20% of Net Procurable Quantity. (iii) Where there are not more than three Indian suppliers categorized as Approved vendor for the tendered item, developmental vendors without any conditional approval can be considered for placement of bulk order without any quantity restrictions. (iv) Authorized dealers/ distributors need to quote with Tender specific authorization from the approved vendors/developmental vendors/Manufacturers failing which offer will be summarily rejected. In such cases the inspection will be carried out at the works premises of approved vendors/developmental vendors.
Make in India Policy (Indication of Local Content) : The procurement of this item is reserved from Class-I local suppliers only as per the Public Procurement (Preference to Make in India) Order, 2017, as amended. ('Class-I local supplier' means a supplier or service provider, whose goods, services or works offered for procurement, has minimum local content 50%, as defined under above Order). The bidders must indicate the percentage of local content in the material being offered in the range of 0-100. The local content percentage in their offered product should be entered under remarks or at relevant place for this specific requirement of offer form or by uploading documents in respect of this, failing which the offer will be summarily rejected without making any reference from the Purchaser. The value '0' (Zero) is for fully imported items and 100 for fully indigenous items.
25 conditions · 1 needing a document upload
In cases of Contracts/POs for a value in excess of Rs 10 crores, the contractor shall be required to provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. Such certificates shall be required to be submitted by the contractor along with their each online bill in IREPS. The supplier must include 'PO number & PO date', name of item, name of firm, local content percentage, and details of the location(s) at which the local value addition is made, in the certificate. In case the contractor/supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class-II/Non-local or from Class-II to Non-local, a penalty in the form of deduction of 10% of the contract value shall be imposed. For severable contracts or in case of part supply, a penalty in the form of deduction of 10% of the value shall be imposed commensurate to that lot only. This penalty of 10% on the contract value will be over and above the liquidated damages & other deductions/penalties if any applicable in the contract. However, contract once awarded shall not be terminated on this account.
In terms of Clause 12.4 of Instructions to Tenderers for E. tenders, Rev. 1.21 of April 2024 successful bidders unless failing in the exempt category for submission of Security Deposit are mandatorily required to submit requisite Security Deposit as indicated in Letter Of Acceptance.
In terms of clause 3.0 of the Instructions to Tenderers for E. tenders, Rev. 1.21 of April 2024 along with Correction Slip No. 01 of ITT_1.21_April_2024 dated 19.09.2024 Bidders, not failing in the exempt category for furnishing EMD, are required to Mandatorily furnish the requisite EMD along with their offer, Failing which their offer will be summarily rejected.
Restrictions of procurement from the bidders from countries sharing land borders with India: In terms of clause 2.4.3 of Instruction to Tenderers for e-Tenders, Rev. 1.21 of April 2024 regarding restrictions on procurement from bidders of a country sharing land border with India, bidder must confirm that ''I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and confirm that I comply with any one of the following two conditions: (a) I certify that I am not from such a country; or ( b ) I am from such a country and have been registered with the Competent Authority. I hereby certify that I fulfill all requirements in this regard and is eligible to be considered. Evidence of valid registration by the Competent Authority is attached.''
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Bank Account details for the purpose of payment shall be taken as appearing in the profile of the vendor in IREPS. In case, there is any change in the bank account details, vendors are advised to update their bank account details in their IREPS profile before submitting their e-bids.
MARKING : Vendor name/identification marks as well as month and year of manufacture must be inscribed/engraved/screen- printed/embossed on item supplied to Northern Railway as per the relevant drawing/specification/description.
3 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
MODE OF DESPATCH : By Road Transport on freight pre-paid and door delivery basis.
FOR : Destination, Offers for delivery of consignment of one consignee at premises of another consignee shall be treated as Commercially Unresponsive and such offers shall be summarily rejected.
1 location across Haryana · 49,185 Numbers total
Blade for Electrical motor wiper drive unit.
09252045~WR
09252045
Open - Indigenous
Goods
Haryana
₹0
₹49,330
21 Apr 2026
31 Mar 2026
1 item · 49,185 Numbers total
Side Frame Friction Liner. Drawing No. :- SK-69594, Alt. 38, Item No. 7. Spec. No: WD-21 -CASNUB-22 NLB Bogie- 93, Rev. 2 with Amend. 6. Liner shall be marked for manufacturer initial and month & year of manufacturing by metal laser engraving in 6mm size and 0.1 mm depth minimum. (A s per RDSO letter no. MW/PLNG/CSNB/VENDOR Dt. 10.11.23). [ Warranty Period: 30 Months after th e date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Dy.Chief Material Manager/JUDW, NR | Haryana | 49185.00 Numbers |
| Total | 49,185 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5449458.pdf
ATTACHMENT
5614743.pdf
ATTACHMENT
5435285.pdf
ATTACHMENT
5449460.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .