Special repair maintenance work of school building in PM Shri Kendriya Vidyalaya, Varanasi, UP-22100

Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc consisting of

following operations:

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with water proofing compound

conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm

height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of cement mortar

1:5 (1 cement : 5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved

by Engineerin- charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge to required slope and

treating similarly the adjoining walls upto 300 mm height

With average thickness of 120 mm and minimum thickness

at khurra as 65 mm.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x

300 mm x 20 mm) with SRI (solar refractive index) > 78,

solar reflection > 0.70 and initial emittance > 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm

12.55 thick cement sand mortar in the ratio of 1:4 (1 cement : 4 SQM 1094.22 1703.95 1864496.169

coarse sand) and grouting the joints with mix of white

cement & marble powder in ratio of 1:1, including rubbing

and polishing of the surface upto 3 cuts complete, including

providing skirting upto 150 mm height along the parapet

walls in the same manner.

Providing and fixing mineral fibre false ceiling tiles at all

heights of size 595X595 mm of approved texture, design

and pattern. The tiles should have Humidity Resistance

(RH) of 99%, Light Reflectance ≥ 85%, Thermal

Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as

per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron

section of 0.33 mm thick (galvanized @120 gsm)

comprising of main T runners of 15x32 mm of length 3000

mm, cross T of size 15x32 mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length

600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item

(galvanised@80gsm) 50 mm long 8 mm outer diameter M-6

dash fasteners, 6 mm diameter fully threaded hanger rod

With 16 mm thick beveled tegular mineral fibre false ceiling

tile (NRC 0.55 to 0.60)

13.4 12 mm cement plaster of mix :

Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 80 7370.65 589652

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC (Volatile Organic Compound ) content

13.81 less than 50 gram/ litre, of approved brand and

manufacturer including applying additional coats wherever

required to achieve even shade and colour

13.81.1 Old work (one or more coats) SQM 3000 62.7 188100

Finishing walls with Acrylic Smooth exterior paint of

required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on

existing cement paint surface

Providing wood work in frames of doors, windows, clerestory

9.1 windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately)

9.1.1 Second class teak wood cum 2.7 142949.7 385,964.19

Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board

9.21 construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws

Providing and fixing aluminium tower bolts, ISI marked, anodised

(anodi ccoating not less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming

9.66 to IS:4992 with necessary screws etc. complete (Copper oxidised

as per IS 1378)

Providing and fixing bright finished brass 100 mm mortice latch

9.76 and lock with 6 levers and a pair of lever handles of approved each 50 854.65 42,732.50

quality with necessary screws etc. complete.

Providing and fixing 150 mm bright finished floor brass door

14.34 stopper with rubber cushion, necessary brass screws etc. to suit each 50 271.45 13,572.50

shutter thickness complete

Providing and fixing aluminium die cast body tubular type

hydraulic door closer (having brand logo with ISI, IS : 3564,

9.83 embossed each 20 22,497.00

on the body, door weight upto 35 kg and door width upto 700

necessary accessories and screws etc. complete 1124.85

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable length (

total length 90 m), having 50 nos rounds per 6 metre

length, upto 3 m height of wall with existing angle iron ‘Y’

shaped placed 2.4m or 3.00 m apart and with 9 horizontal

R.B.T. reinforced barbed wire, stud tied with G.I. staples

16.53 and G.I. clips to retain horizontal, including necessary bolts meter 5000 375.8 1879000

or G.I. barbed wire tied to angle iron,all complete as per

direction of Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5 mm thick) wire of high

tensile strength of 165 kg/ sq. mm with tape (0.52 mm

thick) and weight 43.478 gm/ metre (cost of M.S. angle,

C.C. blocks shall be paid separately)

Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting,

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

Providing and fixing multiwall solid/structured

polycarbonate sheets of 16 mm thickness, UV-stabilized,

clear/translucent/coloured as specified, including cutting to

MR size, drilling, necessary aluminium/gi/GI powder-coated sqm 200.00 2,500.00 500,000.00

profiles, EPDM rubber gaskets, sealant, fasteners, and all

accessories required for complete installation as per

drawings and manufacturer’s specifications.

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

13.61.1 Two or more coats on new work sqm 1,000.00 155.9 155,900.00

Applying GST Correction Factor @0.973 15,528,106.65

Add Cost Index @3% 465,843.20

Digitally signed by AMIT

Electrical Estimate

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable in

surface/recessed medium class PVC conduit, with modular switch,

1.10 modular plate, suitable GI box and earthing the point with 1.5 sq. mm.

FRLS PVC insulated copper conductor single core cable etc as required.

1.10.3 Group-C (Primary point ) Point 200 1,704.00 340,800.00

Wiring for group controlled (looped) light point/ fan point/call

bell point (without independent switch etc.) with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface

1.55 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc as required.

Wiring for twin control light point with 1.5 sq.mm

FRLS/HFFR PVC insulated copper conductor single

core cable in surface / recessed steel conduit, 2 way

1.4 modular switch, modular plate, suitable GI box and Point 15 2,242.00 33,630.00

earthing the point with 1.5 sq.mm. FRLS/HFFR PVC

insulated copper conductor single core cable etc .as

Wiring for light/ power plug with 2X4 sq. mm

FRLS/HFFR PVC insulated copper conductor single

1.12 core cable in surface/ recessed medium class PVC m 1500 373.00 559,500.00

conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC

insulated copper conductor single core cable for loop

earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with

1.14 the following sizes of FR PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 1100 373.00 410,300.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 482.00 72,300.00

1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Metre 150 621.00 93,150.00

1.14.6 2 X 16 sq. mm + 1 X 6 sq. mm earth wire Metre 150 832.00 124,800.00

Supplying and drawing following pair 0.5 mm dia

1.18 FRLS/HFFR PVC insulated annealed copper

conductor, unarmored telephone cable in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade,

0.7 mm solid copper conductor PE insulated, shielded

1.19 with fine tinned copper braid and protected with PVC m 250 54.00 13,500.00

sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including

1.20 painting in case of surface conduit, or cutting the wall

and making good the same in case of recessed

conduit as required.

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal

size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including painting etc. as

Supplying and fixing following modular switch/ socket

1.24 on the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 130 136.00 17,680.00

1.24.5 6 pin 15/16 amp socket outlet Each 130 219.00 28,470.00

1.24.6 Telephone socket outlet Each 25 168.00 4,200.00

1.24.7 TV antenna socket outlet Each 25 168.00 4,200.00

Supplying and fixing two module stepped type electronic fan regulator

1.25 on the existing modular plate switch box including connections but Each 35 402.00 14,070.00

excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required

Supplying and fixing following size/ modules, GI box along with modular

base & cover plate for modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 A modular socket outlet and 15/16 A modular switch, connections

etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/

wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc.

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V,

complete as required.

Installation, Testing and Commissioning of ceiling fan,including wiring

the down rods of standard length (upto 30 cm) with 1.5 sq. mm

1.45 FRLS/HFFR PVC insulated, copper conductor, single core cable, including Each 100 332.00 33,200.00

providing and fixing phenolic laminated sheet cover on the fan box etc.

Installation, Testing and Commissioning of exhaust fan in the existing

1.50 opening, including making good the damage, connection, testing,

commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust

fan of all sizes.

Providing and fixing following capacity TP&N disconnector fuse switch

2.1 unit inside the existing panelboard with ISI marked HRC fuses including

drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing following rating and breaking capacity and pole

MCCB with thermomagneticrelease and terminal spreaders in existing

2.2 cubicle panel board including drilling holes in cubicle panel, making

connections, Ics=100% Icu and Operational Voltage 690V etc. as

Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

2.3 copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical

type, 415 V, TPN MCB distribution board of sheet steel, dust protected,

duly powder painted, inclusive of 200 A tinned copper bus bar, common

2.5 neutral link, earth bar, din bar for mounting MCBs (but without MCBs

and incomer ) as required . (Note : Vertical type MCB TPDB is normally

used where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

2.1 the existing MCB

DB complete with connections, testing and commissioning etc. as

2.10.2 Single pole and neutral each 20 643.00 12,860.00

2.10.5 Triple pole and neutral each 10 1,301.00 13,010.00

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240

V, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Supplying and fixing following rating, four pole, (three phase and

neutral), 415 volts, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

2.15 connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200

mm X 150 mm, made of mild steel, at least 2 mm

2.21 thick, and vitreous enamelled white on both sides, each 10 315.00 3,150.00

and with inscription in single red colour on front side

Supplying and installaton following size of perforated painted with

powder coating M.S. cable trays withperforation not more than 17.5%,

4.1 in convenient sections, joined with connectors, suspended from the

ceiling with two numbers MS/GI Suspenders i/c base of suitable size

MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.

4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre 100 623.00 62,300.00

4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 80 686.00 54,880.00

4.1.3 200 mm width X 50 mm depth X 1.6 mm thickness Metre 100 775.00 77,500.00

4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 80 866.00 69,280.00

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and salt

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 Meter long etc. with

charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover plate

having locking arrangement and watering pipe of 2.7 Meter long etc.

with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below

ground as strip earth electrode, including connection/ terminating with

5.9 G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by Metre 200 160.00 32,000.00

overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe

5.11 from earth electrode includingconnection with G.I. nut, bolt, spring, Metre 100 755.00 75,500.00

washer excavation and re-filling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

5.18 earthing along with existing surface/ recessed conduit/ submain wiring/ Metre 200 50.00 10,000.00

cable as required.

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of

wall for lightning conductor complete as required.(For horizontal run)

Laying of one number PVC insulated and PVC sheathed / XLPE power

cable of 1.1 KV grade of following size direct in ground including

excavation, sand cushioning, protective covering and refilling the trench

etc as required.

10.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 900 475.00 427,500.00

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Supplying and making end termination with brass compression gland

11.1 and aluminium lugs for following size of PVC insulated and PVC sheathed

/ XLPE aluminium conductor cable of 1.1 KV grade as required.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty)

in ground complete with RCC collars, jointing with cement mortar 1:2 (1

cement : 2 fine sand) including trenching (75 cm deep) and refilling etc

Supply, Installation, Testing and Commissioning of ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(

Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle

kit, safety rope, copper winding, steel/Al body Power Factor not less

than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM

(tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less

9.2 than 10%, suitable for operation with regulator for speed control and all

remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 0C (max.),

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz,

single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c

external connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper

conductor single core cable and earthing etc. as required.

1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min

1.1KV grade multicore aluminium conductor XLPE insulated and PVC

sheathed armoured cable conforming to relevant IS. (Cable shall be

purchased only after approval of cable schedule by architect /

consultant) of following sizes

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Flange mounted hot dip Galvanized Octangonal Pole of 7 Mtr height

made from 3.5 mm thick HT Steel plate, having top dia-90mm & bottom

dia of 155 mm complete with window with flash cover at a height of

500mm from the base for cable termination block etc and galvanized

base plate of size 220 mm x 220mm x 12 mm thick on existing cement

concrete pedestal as required including supplying and fixing the

following in the window box provided for cable termination as per

direction of engineer incharge:-

a) Supplying and fixing 6mm thick laminated mounted sheet inside the

window mounted on and including providing and welding 02 nos G.I.

strips 4mm thick of suitable length and having suitable size tapped holes

b) Supplying and fixing 63 Amps terminal block, suitable for 10 sq.mm

conductor- 04 nos & shorting links- 05 nos. on DIN Channel including

providing. And fixing DIN Channel of suitable length- 01 nos on the

MR existing laminated sheet. each 25 14,530.00 363,250.00

c) Supplying and fixing 6 Amps, SPMCB, “C” characteristics curve- 02

nos, Earth stud 02 nos, welded at suitable height, washers, springs

washers & nuts.

d) M - 20 reinforced cement concrete foundation of size 550mm x

550mm wide and 1200 mm deep i/c excavation of earth, providing

cutting, bending and placing in position, reinforcement of cold twisted

bars of 12 mm dia- 1200 mm long (approx)- 08 nos and reinforcement

ring of cold twisted bar of 8 mm dia-190 spacing centre to centre

(approx)- as required with positioning of foundation bolts as shown in

the item given below and providing 63 mm (O.D.) PVC Pipe of suitable

length for cable entry & exit as required.

e) 04 nos, M20X470mm j-type (EN8grade) foundation bolt (total length

600mm) with nuts, washer including 01 nos template of 3 mm thick size

220x220mm with 4 nos 24mm dia holes, to match with PCD of pole base

f) 1 meter long Galvanized single arm bracket for mounting on pole and

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

LED Street light fixture, powder coated pressure die cast aluminium

body (System lumen efficacy >135 lm/Watt).

Supplying, Installation, Testing & Commissioning

of Street light LED fixture, powder coated

pressure die cast aluminium body with built in or

separate driver as per the requirement with Driver

efficiency >85%, Input voltage: 140-270 Volt AC,

frequency 50/60 hz, Operating temp range -5 0C to

50 0C, internal surge protection of 5 KV L,N,E as per

IEC 61000-4-5, Driver efficiency >85%,THD < 10%

as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI

>70, under voltage and over voltage protection,

EMI-EMC as per CISPR-15, lenses for beam angle

as per IESNA type I/II/III as per the width of the road

and the project requirement., suitable to fit in up to

8.14 65mm dia pipe, life time (LED,Driver & electrical

circuitary) of minimum 50000 Burning Hours

with 70% of initial Lumen maintained till life

ends as per LM80 extrapolation IES TM-21-11

report, CCT 3000°K / 4000°K / 5700°K /6500°K (As

per ANSI Bin), SDCM(Standard Deviation Color

Matching) <5, Maximum power consumption should

not more than the specified rating and Fixture shall

be of relevant BIS standard complete in all

respect i/c external connections with 1.5 sq mm

FRLS/HFFR, PVC insulated copper conductor

single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen

efficacy >135 lm/Watt output . LM79 & LM80 Test

report and all testing required for LED fixtures

as per BIS shall be submitted.. Shape size and

CCT shall be as approved by Engineer-in-Charge as

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Supplying, installation, Testing & Commissioning of

LED Recessed/surface Down lighter (Round/

square/ Rectangular) SMD type of following body

material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency

50/60 hz, Operating temp range -5 0C to 40 0C

centigrade, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10%,

P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) <19, Flicker free (flicker should be below 5

%), life time (LED, Driver & electrical circuitry), life

time of minimum 50000 Burning Hours with 70%

of initial Lumen maintained till life ends, CCT

ANSI Bin), SDCM(Standard Deviation Color

Matching) <3, Maximum power consumption

should not more than the specified rating and

Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing Complete

in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper conductor

single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen

efficacy ≥120 <135 lm/Watt output . LM79 & LM80

Test report and all testing required for LED

8.2.5 fixtures

12 as per BIS shall be submitted.. Shape size

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

LED Batten light (System lumen efficacy ≥105 <120

Supplying, Installation, Testing & Commissioning of LED surface

mounted Batten light of following bodymaterial and construction

as per IS : 10322 with driver (Replaceable) as per the

requirement with Driver efficiency >85%, Operating voltage AC

140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C

to 40 °C, internal surge protection of 2.5 KV with Short & Open

circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker

free, (flicker should be below 5 %), life time (LED, Driver &

electricalcircuitry), of minimum 50000 Burning Hours with 70%

of initial Lumen maintained till life ends, CCT 3000°K / 4000°K /

8.9 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation

Colour Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant

BIS standard. Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete in all respect

i/c external connections with 1.5 s mm FRLS/HFFR, PVC insulated

copper conductor single core cable and earthing etc. as required

with Minimum 5 year OEM warranty. System lumenefficacy ≥105

<120 lm/Watt output . LM79 & LM80 Test report and all testing

required for LED fixtures as per BIS shall be submitted. Shape

size and CCT shall be as approved by Engineer-inCharge as per

requirement. (Thermal management: heat sink of aluminium

housing such that LED

Supplying, drawing, Testing and commissioning of Cat6A

UTP 4 pair, 23 AWG solid copper cable in existing conduit/

on surface, U/FTP, LSZH, NonPlenum, Horizontal (solid)

Cable suitable for high speed data networking application

supporting upto 10Gbps over a 100 meter channel. The 4

39.18 Unshielded Twisted Pairs (UTP) cable with color coded

insulation for easy indentification should have

FLAMEPROPERTIES i.e. Flammability Test - IEC 60332-1,

Smoke Density - IEC 61034, LSZH standards compliance:

ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS.

Delay Skew should be < 45NS. The outer Cable Diameter

39.18.1 1 Run of cable meter 100 74 7400

Supplying of Single Phase Copper Digital Motors 450mm BLDC

Exhaust fan, 1400 RPM with necessary screws etc.

LT PANEL (Normal-Raw power)

1 Nos 160 Amp FP Moulded Case Circuit Breaker

1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.

1 No.160 Amp digital ammeter with inbuilt selector switch and CT's.

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

MR 1 Set of Electronic KWH Meter.

200 Amp TPN aluminium busbar.

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

04 No. 63 Amp TPN Miniature Circuit Breaker (MCB)

03 No. 40 Amp TPN Miniature Circuit Breaker (MCB)

01 No of control / power wiring.

Panel described as above LS 1 230,000.00 230000

METER BOARD (TYPE-A&B)

1 Nos 250 Amp FP Moulded Case Circuit Breaker

1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.

1 No. 200 Amp digital ammeter with inbuilt selector switch and CT's.

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 Set of Electronic KWH Meter.

300 Amp TPN aluminium bus bar.

03 Nos 63 Amp TPN Miniature Circuit Breaker.

12 Nos 40 Amp TPN Miniature Circuit Breaker with Electronic Energy Meter.

2 Nos 40 Amp TPN Miniature Circuit Breaker

1 No of control / power wiring.

Panel described as above LS 1 330,000.00 330000

EXTERNAL LIGHTING PANEL-

Cubicle type totally enclosed free standing type moisture, dust, vermin & weather proof Floor Distribution

Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following

equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with

inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires /

cable, interconnection, painting complete as per specification & drawing.

1 No. 100 Amp FP ( 35 KA Ics) Moulded Case Circuit Breaker.

1 No. 0 to 500 Volt digital voltmeter with inbuilt selector switch.

1 No. 100 Amp digital ammeter with inbuilt selector switch and CT's.

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 Set 24 Hrs TSQ Timer

1 Set 100 Amp, 4P Contactor & A/M switch and Push Button.

100 Amp TPN aluminium busbar.

09 No. 25 Amp DP MCB.

03 No. 63 Amp TPN MCB.

Panel described as above LS 1 115,000.00 115000

Digitally signed by AMIT

Plumbing/ Sanitary Estimate

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Providing and fixing floor mounted, white vitreous china single

piece, double traps syphonic water closet of approved

brand/make, shape, size and pattern including integrated white

17.81 vitreous china cistern of capacity 10 litre with dual flushing each 10 18212.9 182129

system, including all fittings and fixtures with seat cover, cistern

fittings, nuts, bolts and gasket etc including making connection

with the existing P/S trap, complete in all respect as per

directions of Engineer-in-Charge.

Supply, Installation, Testing and Commisiong of PNEUMATIC

SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH

MR-1 INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET EACH 10.00 7381.00 73810.00

FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) Model

No. APCWHT- 5012500S or equivalent

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP

17.7A Brass single hole basin mixer of approved quality and make,

including painting of fittings and brackets, cutting and making

good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a 15

mm CP Brass single hole basin mixer

Providing and fixing white vitreous china flat back or wall corner

type lipped front urinal basin of 430x260x350 mm and

340x410x265 mm sizes respectively with automatic flushing

17.4.1 cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing

Providing and fixing water closet squatting pan (Indian type W.C.

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

17.1 controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good

the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

17.16A long with S.S. triangular plate to Eureopean type W.C. of quality each 14 349.15 4888.1

as approved by Engineer - in - charge

Providing and fixing C.P. brass angle valve for basin mixer

18.53 and gyser points of approved quality conforming to IS :

18.53.1 15 mm nominal bore each 100 574.3 57430

Providing and fixing C.P. brass long body bib cock of approved

18.51.1 quality conforming to IS standards and weighing not less than 690 EACH 50.00 777.38 38,868.92

gms. 15 mm nominal bore

17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT

Bottle trap 38 mm single piece moulded with height of 270

mm, effective length of tail pipe 260 mm from the centre of

the waste coupling, 77 mm breadth with 25 mm minimum

water seal, weighing not less than 263 gms

Providing and fixing PTMT grating of approved quality and

18.58.1 Circular type

18.58.1.1 125 mm nominal dia with 25 mm waste hole each 50 51.85 2592.5

Providing and fixing mirror of superior glass (of approved quality) and

17.32 of required shape and size with plastic moulded frame of approved

make and shade with 6 mm thick hard board backing :

17.32.4 Rectangular shape 1500x450 mm nos 10 2093 20930

Providing and fixing PTMT pillar cock of approved quality and colour.

15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing and fixing PTMT Waste Coupling for wash basin

17.69 and sink, of approved quality and colour.

Waste coupling 38 mm dia of 83 mm length and 77 mm

breadth, weighing not less than 60 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, havingthermal stability for hot & cold water supply

and all CPVC plain & brass threaded fittings, including fixing

18.7 the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge

18.7.3 25 mm nominal dia Pipes metre 100 401.55 40155

18.7.5 40 mm nominal dia Pipes metre 100 702.95 70295

18.7.6 50 mm nominal dia Pipes metre 80 934.15 74732

Providing and fixing uplasticised PVC connection pipe with brass

18.21.2 45 cm length

18.21.2.2 20 mm nominal bore each 90 119.05 10714.5

Applying GST Correction Factor @0.973 1,020,037.76

Add Cost Index @3% 30,601.13

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION QTY UNIT DSR RATE DSR AMOUNT MR AMOUNT

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains

1 dressing of sides and ramming of bottoms for all lift including

getting out the excavated soil and disposal of surplus

excavated soil as directed within a lead of 50 m

Filling available excavated earth (excluding rock) in trenches

2 2.25 plinth sides of foundations etc in layers not exceeding 20cm in 50.00 cum 196.00 9800.00

depth consolidating each deposited layer by ramming and

watering lead up to 50 and for all lift

Providing and laying in position cement concrete of specified

3 grade excluding the cost of centering and shuttering - All work

up to plinth level

1:5:10 (1 cement 5 coarse sand (zone-III) derived from

3.1 4.1.10 natural sources 10 graded stone aggregate 40 mm nominal size 10.00 cum 6518.60 65186.00

derived from natural sources)

Providing and laying in position specified grade of reinforced

4 cement concrete excluding the cost of centering shuttering

finishing and reinforcement - All work up to plinth level

1:1.5:3 (1 cement 1.5 coarse sand (zone-III) derived from

4.1 5.1.2 natural sources 3 graded stone aggregate 20 mm nominal size 15.00 cum 9045.75 135686.25

derived from natural sources)

Steel reinforcement for R.C.C work including straightening

6 cutting bending placing in position and binding all complete

upto plinth level

6.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more 2000.00 kg 107.85 215700.00

Structural steel work riveted bolted or welded in built up

7 10.2 sections trusses and framed work including cutting hoisting 2200.00 kg 133.70 294140.00

fixing in position and applying a priming coat of approved steel

primer all complete

Steel work in built up tubular (round square or rectangular

hollow tubes etc) trusses etc including cutting hoisting fixing in

8 position and applying a priming coat of approved steel primer

including welding and bolted with special shaped washers etc

8.1 10.16.1 Hot finished welded type tubes 4955.00 kg 194.40 963252.00

PROVIDING AND FIXING CARBON STEEL GALVANISED

MINIMUM coating 5 micron dash fastner of 10 mm dia double

9 treaded 6.8 grade yield strength 480 N/mm2 counter sunk

head comprising of 10mm dia polyamid PA6 grade sleeve

including drilling of hole in frame concrete /masonry etc. as per

direction of engineer incharge

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION QTY UNIT DSR RATE DSR AMOUNT MR AMOUNT

Providing and fixing precoated galvanised iron profile sheets

(size shape and pitch of corrugation as approved by Engineer-in-

Charge) of total coated thickness 0.50mm (base metal of

minimum 0.45mm thickness with total coating thickness of

0.05mm) with zinc coating 120 grams per sqm as per IS 277 in

240 mpa steel grade 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 microns. Sheet should

10 12.5 have protective guard film of 25 microns minimum to avoid 300.00 SQM 738.650 221595.00

scratches during transportation and should be supplied in single

length upto 12 metre or as desired by Engineer-in-charge. The

sheet shall be fixed using self drilling /self tapping screws of

size (5.5x 55 mm) with EPDM seal complete upto any pitch in

horizontal vertical or curved surfaces excluding the cost of

purlins rafters and trusses and including cutting to size and

shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing

accessories of total coated thickness 0.50mm (base metal of

minimum 0.45mm thickness with total coating thickness of

11 0.05mm) with Zinc coating 120 grams per sqm as per IS 277 in

240 mpa steel grade 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 microns using self

drilling/self tapping screws complete

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade

12.1 13.61.1 Two or more coats on new work 500.00 SQM 155.900 77950.00

Demolishing cement concrete manually/ by mechanical means

13 including disposal of material within 50 metres lead as per

direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design

Taking out existing CC interlocking paver blocks from footpath/

central verge including removal of rubbish etc. disposal of

14 16.83 unserviceable material to the dumping ground for which 150.00 SQM 131.750 19762.50

payment shall be made separately and stacking of serviceable

material within 50 metre lead as per direction of Engineer-in-

Laying old cement cocrete interlocking paver blocks of any

design/ shape laid in required line level curvature colour and

15 16.84 pattern over and including 50 mm thick compacted bed of 150.00 SQM 402.950 60442.50

coarse sand filling the joints with fine sand etc. all complete as

per the direction of Engineer-in-charge (Old) CC paver blocks

shall be supplied by the department free of cost)

Digitally signed by AMIT

S.No. DSR Ref. No. DESCRIPTION QTY UNIT DSR RATE DSR AMOUNT MR AMOUNT

Providing and laying factory made chamfered edge Cement

Concrete paver blocks in footpath, parks, lawns, drive ways or

light traffic parking etc. of required strength, thickness &

size/shape, made by table vibratory method using PU mould,

laid in required colour & pattern over 50mm thick compacted

16 bed of sand, compacting and proper embedding/laying of inter

locking paver blocks into the sand bedding layer through

vibratory compaction by using plate vibrator, filling the joints

with sand and cutting of paver blocks as per required size and

pattern, finishing and sweeping extra sand, complete all as per

direction of Engineer-in-Charge.

16.1 16.91.1 60mm thick cement concrete paver block of M-35 grade 100 sqm 1045.65 104565.00

with approved colour design & pattern

Applying GST Correction Factor @0.973 2,209,597.33

Add Cost Index @3% 66,287.92

Digitally signed by AMIT