REPAIR TO JOINERY SANITARY FITTINGS PLASTERING AND CERTAIN CIVIL WORK AT ZONE C UNDER AGE BR II AT GE FAIZABAD

Amount

Taking down of chowkhats or frame with shutters n.exc. 1.5 Sqm each without taking off shutter from the frame ,complete all as specified.

Taking down of chowkhats or frame with shutters exc. 1.5 Sqm but nexc. 4 Sqm each without taking off shutter from the frame ,complete all as specified.

Taking down shutter off any description n exc 1.00 sqm each , ,complete all as specified.

Taking down shutter of any description exc 1.00 sqm but n exc 2.0 Sqm each , complete all as specified.

Refixing of shutter in same opening after resecuring or easing & adjusting of any description exc 1.00 sqm but n exc 2.0 Sqm each ,complete all as specified.

S&F for plain, solid, straight 2nd class Hard wood chowkhats and frames, wrought, framed rebated on solid, rounded or chamferred, put together with glue pinned at joints ,complete all as specified.

S&F for 2nd class hard wood 35 mm thick plain framed, panelled shutter (two no of panels) with lock rail and panel of 12 mm BWP commercial ply complete all as spd and directed. The size of rail and stiles shall be as per IS -1003 (part-1) , kiln seasoned and chemically pressure treated, ,complete all as specified.

S & F for 30 mm thick Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides ,complete all as specified.

S&F for 2nd class HW glazed and skelton shutters 30mm open rebated and prepared to receive glass, gauze etc (any number of sash bars) edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc sizes of member of shutter as spd in SSR Pt-1 , section 8, clause 8.20 ,complete all as specified..

S &F for solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified & shown on drawing ,complete all as specified.

S&F for Factory made solid PVC doors shutter 30 mm thick(syles) consisting of frame made out of MS tube of top and bottom rals MS frame shall be coverred with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , suppling & fixing in the frame at site as per specification & drawing ,complete all as specified..

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long ,complete all as specified.

S&F Aluminium handles extruded type ,anodised of 150 mm size ,complete all as specified.

S&F 100 mm size butt hinges medium weight cold rolled stain less steel ,complete all as specified.

S&F in repair Steel window with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete without glazing bars dovetailed or welded including one coat shop zinc chrome primer ,complete all as specified.

S&F in repair Steel window with side hung shutters including box type hinges with Z section, 100mm steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete with glazing bar dovetailed or welded including one coat shop zinc chrome primer ,complete all as specified.

M&L in repair Prelaminated particle board shutter 18/19mm thick interior grade prelaminated one side and decorative choice lamination & other side balancing white lamination fixed with screws to timber framework inclding wooden beading, lipping all around the pannel including taking down ,complete all as specified.

S&F in repair 18 mm thick one side laminated coloured PVC board as in drawer, cup board shutters, partitions, etc., complete all as specified and as directed including suitable iron/wooden fixing brackets, PVC strip lipping ,complete all as specified.

S&F Continous piano hinges, mild steel, bright finish or electro galvanised of 30mm size,complete all as specified.

S&F 150 mm extruded aluminium alloy handles, fabricated type., anodised ,complete all as specified.

S&F 100 mm Hasp and staple, aluminium alloy wire type, , including bolt to hinge plate and fixed with screws ,complete all as specified.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished ,complete all as specified.

S& F sliding channel and necessary fittingand fixtures for drawers to be fixed with prelaminated partice board ,complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exe. 15cm thickness (below or above ground level), complete all as specified .

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L for provinding precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in cover slab , Shelves and similar acticles including formwork ,complete all as specified.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips,complete all as specified.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar,complete all as specified.

M&L Brickwork with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6,complete all as specified.

Taking down plaster in any description of cement plaster incl racking out joints, scrubbing down with water,complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick work, finished even & smooth without using extra cement in CM 1:6,complete all as specified.

M&L for 10 mm thick ceiling plaster including dubbing out average 10 mm thick in CM 1:4 and applying three coat white wash including preparation of new surface ,complete all as specified.

M&L for Two coat of cement base paint on new wall after preperation of plastered surface,complete all as specified.

M&L for preparing newly plastered surfaces of walls and applying two coats with distemper oil emulsion after providing chalk whitening and a layer of 1mm thick wall care putty (preparatory to distempering ) ,complete all as specified.

M&L preperation for old surface of wall after removal of existing treatment of wall applying two coat of oil bound distemper ,complete all as specified.

M&L preparing of old plastered surface of walls and applying one coats of cement base paint ,complete all as specified.

M&L preparing of old plastered surface of walls and applying one coats of oil bound distemper ,complete all as specified.

M&L for painting with two coats of synthetic enamel paint over one coat of pink primer on new surface wood based surface exe. 10 cm width or girth,,complete all as specified.

M&L for preparatiion of new steel surface and applying two coat of of black Japan on steel over one coat of red oxide zink primer 10cm width or girth ,complete all as specified.

M&L for preparatiion of old painted steel surface and applying one coat of of synthetic enamel paints on steel over 10cm width or girth,complete all as specified.

M&L for preparatiion of old painted and applying one coat of of synthetic enamel paints on wooden surface over 10cm width or girth ,complete all as specified.

M&L preparing of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Repairs to broken edges of roof projection ,chajja facia and simillars works girth n exc 30 CM with 15 mm thick plaster including dubbing coat in CM 1:4 and applying two coat of cement base paint ,complete all as specified.

S&F white viterous china wash hand basin flat back, size 550 x 400mm including 32mm bore waste coupling, PVC down pipe of 32 mm bore incl brackets & fixed in repair ,complete all as specified.

S&F in repair 15 mm bore bib cock fancy type chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, ,complete all as specified.

S&F in repair 15 mm bore bib tap hig pressure PTMT, ,complete all as specified.

S&F in repair15 mm bore concealed stop valve cromium plated with long shunk and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed down both ends for iron pipe, including making good ,complete all as specified.

S&F in repair 15 mm bore Angle valve/ stop valves with wall flange cast copper alloy fancy type cromium plated screwed down both ends for iron pipe ,complete all as specified.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors,complete all as specified.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors,complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan head chromium plated, screwed down high pressure with long shank and fly nut for 15 mm bore iron pipe,complete all as specified.

S&F in repair grating 100 mm dia stainless steel with or without waste hole,complete all as specified.

M&L in repair for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore ,complete all as specified.

S & F in repair 15mm dia and 450mm long PVC connection pipe with PTMT nuts at both ends,complete all as specified.

S&F in repair vitreous china wash down closet squatting pan (Orissa pattern), of size 630X450mm, white (excluding flush pipe, flushing cistern) , including connection to trap and flushing pipe anti-syphonage pipe etc, making good to match the floor,complete all as specified.

S & F in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern ,complete all as specified.

S&F in repairs looking mirror of size 600mm x 450mmx 4.00 mm fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook ,complete all as specified.

S&F in repair stainless steel utensil rack 1 mm thick of size 900x900mm and fixing to wall with screws ,complete all as specified.

S & F in repair for Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including waste coupling , bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm ,complete all as specified.

S&F in reapir chromium plated towel rail 600 mm long complete D type,complete all as specified.

S&F in repair chromium plated shower roses with or without swivel joints, size 125 mm dia incl fixing to steel pipe or union ,complete all as specified.

M&L Cutting chases pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc. 10 cm girth to brickwalls ,complete all as specified.

Taking down galvanised tubing of 15 mm bore incl cleaning for refixing in any position floor, wall etc, S&F 15 mm bore dia medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor including MS hooks as required ,complete all as specified.

Taking down galvanised tubing of 20 mm bore including cleaning for refixing in any position floor, wall etc,and S&F 20 mm bore dia medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor,including MS hooks as required,complete all as specified.

Taking down and refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors etc., ),complete all as specified.

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ,complete all as specified..(Minmum weight 210 gms).

S&F in repair of 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ,complete all as specified.

Dismantling of water tanks of capacity exc 250Ltr but n.exc 500Ltr and removing to store and S&F rotational (Three layer) moulded polyetheylne water storage tank cylindrical vertical with closed top hoisted and fixed in position ,complete all as specified.

S & F in repair cast iron soil waste and vent pipes and as in spout in any length with or without ears with lead joints fixed in wall or in floor using sand cast CI pipes 75 mm bore pipes etc ,complete all as specified..

S & F in repair cast iron soil waste and vent pipes and as in spout in any length with or without ears with lead joints fixed in wall or in floor using sand cast CI pipes 100 mm bore pipesetc ,complete all as specified.

Taking down and refixing of cast iron soil waste and vent pipes and as in spout in any length with or without ears with lead joints fixed in wall or in floor using sand cast CI pipes 75 mm bore pipesetc ,complete all as specified.

Taking down and refixing of cast iron soil waste and vent pipes and as in spout in any length with or without ears with lead joints fixed in wall or in floor using sand cast CI pipes 100 mm bore pipesetc ,complete all as specified.

S & F CI bends Tee or Y -shape branches pieces of 75 mm bore ,complete all as specified.

S & F CI bends Tee or Y -shape branches pieces of 100 mm bore ,complete all as specified.

M&L for MS work as in hold fast, clamp , stay and similar articles conforming to Fe 290, Gde E-165,complete all as specified.

S&F fixed in repairs fancy type 19/20 mm drapery curtain rod stainless steel tubing with PVC layer and two nos brass finish (Latto) with two nos bracket complete fixing arrangement ,complete all as specified.

S & F in repair mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel / wooden / Z section windoow, ventilator & doors with necessary wooden beading / pin / nut bolt including necessary flat etc. ,complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads in square n exc .5 sqm each pane up to three storey hight ,complete all as specified.

M&L for Dismantling of Floor,hearth or wall tiling including cement mortar bedding(but not backing),rubbish off the premises ,complete all as specified.

M&L 25mm thick cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) as in sub base of floor,complete all as specified.

M&L for 7 to 8 mm thick (square/ rectangular) non skid joint free colour ceramic floor tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm (size not less than 400 mm x 400 mm) in floor set and jointed in neat cement slurry and pointed with colour cement with pigment to match the colour of tiles, including 15 thick mm screed bedding layer in cm 1:6 for laying floor finishes,complete all as specified.

M & L, glazed ceramic coloured tiles 300X450X7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and over and including 10mm thick rendering in CM 1:4 ,complete all as specified.

M & L for granite stone (any type) 15-18 mm thick machne cut bedded and jointed with grey cement surr and pointed with white cement with admixture of pigment to match the shade of granite stone includinf cutting and polishing including 20 mm thick screed bed 1:6 CM ,complete all as specified.

S&F in repair 150 mm ordinary rat tail rod pattern spring including roller and roller plate incl necessary welding etc. ,complete all as specified.

Only repairs/replacement of existing wall mixer 3 in 1/center hole mixture like as Leg,spendal, extension nipple, connector etc ,complete all as specified.

M&L 15mm bore Brass CP wall Mixer 3 in 1 system with complete (with and including hand/Telephonic shower without overhead shower) with long bend pipe, connecting legs & wall flange for mixing hot & cold water screwed down for iron pipe and fixed complete as per sample approved by GE,complete all as specified.

S&F cast copper alloy chromium plated 15 mm bore wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed ,complete all as specified.

Repair of Aluminium door/ window rearange /replacement of damaged rubber beading and tighttening etc. and refixing the same opening , area of each door / window n.exc. 2.0 Sqm each including necessary required fittings and fixture, locking arrangement ,complete all as specified.

S & F in repair 150/200mm size galvanised hasp and staple to be fixed on fixed type steel almirah by welding/drilling/nut bolt/ rebated with complete arrangement to lock to fixed almirah shutter,complete all as specified.

S & F in repair 32/40 mm Bottle trap for WHB of brass chromium plated having minimum water seal of 25mm complete as approved by GE,complete all as specified.

S&F locking clips, rollar and accessories suitable for aluminum sliding door/window and make fully fuctional ,complete all as specified.

S&F in repairs to 4.00 mm thick looking mirror of exc 0.5 Sqm fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and to be fixed on vertical wall with necessary fitting and fixtures ,complete all as specified.

S&F in repair mild steel handle suitable for steel window left / right side and complete fixing arrangement with necessary ,complete all as specified.

S&F in repair mild steel casement stays, size 250 mm, with hinged joint and two plates, with studs complete wih necessary welding , nut bolts etc and make window fully fuctional ,complete all as specified.

S&F in repair with welding of hinges of MS door/ window make fully fuctional,complete all as specified.

Supply and fixed in repair mild steel mortice lock with handle vertical type of size 100mm 4 levers incl welding etc ,complete all as specified.

S&F chromium plated health faucet for pedestal pattern WC screwed down high pressure including 1.0 m long flexible CP pipe ,complete all as specified.

S&F chromium plated jet for pedestal pattern WC with 1 m long flexible pipe screwed down high pressure,complete all as specified.

S&F in repair vitreous china wash down closet (pedestal pattern), white (including seat cover but excluding flush pipe, flushing cistern) , including trap and drain and flushing pipe anti-syphonage pipe, seat cover etc,,complete all as specified.

S&F plastic water closet seat cover, coloured/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, ,complete all as specified.

S&F in repair Aluminium anodised frame and shutter for door, window,ventilators with one or more rebates including jointing cleat, anodised aluminium snap beading and glazing clips for fixing ,complete all as specified.

S&F Aluminium handle 200 mm long American type fixed with screw ,complete all as specified.

S&F 100mm size SS hinge ,complete all as specified.

S&F rubber beading suitable for 5 mm thick glass fixing in aluminium window/ventilator shutter ,complete all as specified.

S&F 5.5 mm thick sheet glass ordinary quality, exc. 0.50 Sqm in each pan, complete all as specified.

M/S- YASH BUILDERS

ABC CONSTRUCTION CO

His And Her Enterprises

Saket Traders

Sai Ram Associates

M/S AVADH ENTERPRISES