Misc civil maintenance work in 04 No chief engineer office and other places at sewa aayog building gomtinagar lucknow

Laying and Jointing PVC Pipe. Heading

Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ISI marked oxidised 200x10 mm M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing ISI marked oxidised 100 mm M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing special quality bright finished brass 40mm cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying rectified Glazed Ceramic Virtified floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.., complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and laying Vitrified tiles in 600x600mm sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(Size 600mm x 600mm)

Providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110mm unplasticised - PVC moulded Fittings/accessories Coupler for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing on wall face 110mm unplasticised - PVC moulded Single tee with door for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(Singhle tee with door-110x110x110mm)

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (One Coat),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(With Cement Mortar 1:4 (1 cement , 4 coarse sand)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 15 mm Nominal dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc)..

Providing and fixing 25 mm Nominal dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc)..

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 15 mm Nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Providing and fixing 15 mm Nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge

Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. . (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Filling the gap in between aluminium frame (Upto 5mm depth and 5 mm width) & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only.

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work.

Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Supply of labor (Mazdoor) for sifting furniture, T&P & Other required for proper completion of the work.

Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work.

Repairng of old cushioned Three seater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge.

Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings Lucknow as per direction of Engineer in charge. The work includes cost of all labour, material and T&P etc.

Providing & Fixing of Solid Black kazage make or equivalent of approved shade as per drawing & specification as approved by the Engineer -in-Charge.

Providing and fixing 4.0 mm thicknes ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item).

Supply and Fixing of 8 mm Table top Glass with edge polish,the work included cost of labour, material T&P etc for proper completion of work.

Providing& making & fixing of Wall Panneling as per drawing from claded with 12mm water proof & Fire Retardent ply & final surface to be finised with 6 mm thick MDF & 1mm Laminate complete with painted or polished as per the approved desin all complete as per drawing, specification and direction as approved by E/I.

Existing old damage Tile and Fixing New false ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work.

Dismanteling, Alignment & Refiixing of existing Aluminium Door including replacement of handle, lock,hinges , tower bolts, EPDM rubber beading, Glass/ACP as requied including cost of silicon sealent,screw,fastner etc (Excluding door closure )and T&P for proper completion of work as approved by E/I.

Dismanteling, Alignment & Refiixing of existing aluminium sliding window including replacement of handle, lock,Hinges ,tower bolts, EPDM Rubber beading,Sliding Roller, Glass as requied including cost of silicon sealent,screw,fastner etc and T&P for proper completion of work as approved by E/I.

Dismentaling old Damage Wooden self & Fixing New Wooden Self made with 18 mm Board, side corner and painting both side on self Including supply of all materials, labour and T & P etc required for proper completion of work.