Mohasa : Construction of 10 units Type II and 2 Units type III new quarters at Mohasa station under ADEN / Lalitpur jurisdiction.

1-All items of CPWD DSR-2023

Item Breakup - 1-All items of CPWD DSR-2023

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 3000 185.65 556950 including water thinnable priming coat with 43 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 44 13.61.1 Two or more coats on new work Sqm 250 155.9 38975 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of 16.91 sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 16.91.1 60mm thick cement concrete paver block of M- Sqm 440 1045.65 460086

pattern. 17.0 SANITARY INSTALLATIONS 17.1S General JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 12 6767.4 81208.8 46 size 580x440 mm with integral type foot rests 17.7B Providing and fixing wash basin with C.I. Each 12 1550.6 18607.2 brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and 47 making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 17.8 Providing and fixing white vitreous china Each 12 1683.35 20200.2 48 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 49 17.10.2.1 610x510 mm bowl depth 200 mm Each 12 4940.8 59289.6 17.31 Providing and fixing 600x450 mm bevelled edge Each 12 1607.95 19295.4 mirror of superior glass (of approved quality) 50 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 Each 12 673.4 8080.8 51 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 52 18.8.2 20 mm nominal dia Pipes Metre 360 537.6 193536 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 53 18.9.2 20 mm nominal dia Pipes Metre 600 274.3 164580 54 18.9.4 32 mm nominal dia Pipes Metre 480 438.6 210528 18.15S BRASS FITTINGS JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 55 18.18.2 20 mm nominal bore Each 24 462.5 11100 Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet 56 18.22.2 150 mm diameter Each 12 222.35 2668.2 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 12000 11 132000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 57 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing not Each 72 125.6 9043.2 58 less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing not Each 48 118.5 5688 59 less than 88 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 60 18.58.1.1 100 mm nominal dia Each 48 37.6 1804.8 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.63 Providing and fixing PTMT angle stop cock 15 Each 36 156.9 5648.4 61 mm nominal bore, weighing not less than 85 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement 19.1 mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 62 19.1.2 150 mm diameter Metre 240 695.8 166992 19.33 Constructing soak pit 1.20x1.20x1.20 m filled Each 2 2890.1 5780.2 with brick bats including S.W. drain pipe 100 63 mm diameter and 1.20 m long complete as per standard design. 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion JHANSI DIVISION-ENGG/NORTH CENTRAL RLY 21.1.1.1 Anodised aluminium (anodised transparent or Kg 330 495.05 163366.5 64 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 275 598.6 164615 65 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Total 29330681.85