REPAIRS TO BOUNDRY WALL , FENCING,RCC JALLI AND OTHER B/R RELATED WORKS UNDER AGE B/R -II (W) OF GE (W) AGRA

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M & L for brick work with fly ash bricks, old size, straight or curved on plan exc. 6 meter mean radius, built in cement mortar (1:4) for wall complete all as specified and directed.

Ditto all as per item No.2 above but except brick complete all as specified and directed.

M & L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping etc including necessary use & waste of formwork complete all as specified and directed.

M&L for rendering 15mm thick with CM 1:4 on fair faces of brick work, finishing fair and even without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick with CM 1:4 on other than fair faces of brick finishing fair and even without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior wether proof paint over a coat of primer complete all as specified and directed.

Dismantling mild steel work of any description complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F joist channel, MS pipe, angle flat, or tee section as in post and strut in fencing including drilling holes notching for wire etc, flat iron fillet (for securing wire mesh/ channeling fencing) including all necessary drilling riveting, bolts etc. and in similar works conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Excavation in post holes each n. exc. 0.5 cum getting out in soft loose of soil,returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25 cm covering and removal of surplus soil at a distance n. exc. 50 m and making good surface complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

S&F MS galvanised chain link fencing of any dia of wire and aprature (weight not exc. 4 Kg per Sqm) as approved by GE), rail straining bolts etc including provision of binding wire of any description complete all as specified and directed. Note : per sqm weight of chain link fencing of approved and between shall be worked out through BOO ordered by Accepting officer and shall be recorded in MB.

S&F in repairs Mild steel round bar 10mm dia and over, cut to length, bent to shape as required including cranking, as in straining bars for chain link fencing complete all as specified and directed

S & F mild steel bolts, purpose made with hexagonal or square head one end screwed the other not exc 12 mm dia with nut and washer complete all as specified and directed.

S&F in repairs galvanised 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post straining bolts including securing or tying at crossing with and including complete all as specified and directed.

S& F in for repairs 25 mm thick measured solid precast cement concrete louvers and jally 1:2:4, type B0 (using 12.5mm graded stone aggregate), including all molding complete all as specified and directed.

Dismantling/ demolition posts or struts embedded in soil or in concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground. complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all complete all as specified and directed.

M&L for Welding in repairs, length n.exc 2.5 cm, thickness of mild steel members to be welded shall not exc 6 mm complete all as specified and directed.

M&L for Welding in repairs, length exc 2.5 cm but n. exc 5 cm, thickness of mild steel members to be welded shall not exc 6 mm complete all as specified and directed.

S&F in repair 0.80 mm thick mild steel, plain, black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. complete all as specified and directed.

M & L for Repairs to steel gate of width n. exc. 2.5 m including replacement of pintle hinges, mild steel aldrop bolt, etc if required necessary welding, riveting, drilling, oiling, greasing for easing the gate complete all as specified and directed.

M & L for Repairs to steel gate of width exc. 2.5 m but n. exc. 5.50 m including replacement pintle hinges, mild steel aldrop bolt, if required necessary welding, riveting, drilling, oiling, greasing for easing the gate complete all as specified and directed.

M/s S. K. Construction Co.

M/s D AND R CONSTRUCTION AND SUPPIERS

M/s Rahul Kumar Agrawal

Rahul Construction Co

MESSARS JAI AMBEY BUILDERS

scjha&sons

MNR ASSOCIATES

SHRI RADHAYSHYAM JHA