Repair to bridge over Kaligiri Nallah at 1.800KM on Elapada to Baigunia road such as pothole repair with BUSG at patches with PMC and SC and Gr-III mettalling at patches for the year 2026-27

Clearing grass and removal of rubbish upto a distance of 50mtr outside the periphery of the area including cost of all labour, T&P articles required for the work complete as per specification and direction by the Engineer-in-Charge. (By manual means).

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified materials wthin all lifts and leads upto 1000m including cost conveyance of all materials, labour charges, T&P etc required for the work complete in all respect as per specification and direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specifications including spreading in uniform thickness hand packing rolling width three wheel static road Roller of 8-10 Ton capacity in stages to proper grade and camber, applying and brooming requisite type of sceening/binding materials to fill up the interstices of course aggregate watering and compacting to the required density as per clause 404 of MoSRT&H specification for road & Bridges works (4th Revision) including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. (Gr-III metalling with stone Screend dust)

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means for low porosity surface including cost, conveyance, royalty of materials, labour charges, T&P etc, required for the work complete as per clause 502 of MoRT&H specification and direction of Engineer in Charge.

Providing and applying tack coat using bitumen of VG-30 Grade using bitumen pressure distributor at the rate of 0.20kg/sqm area on the prepared bituminous/granular surface, cleaned with mechanical broom as per Technical Specification Clause 503 of MoRD & MoSRT&H for road & bridge works including cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-Charge.

Providing & laying 20mm thick Premix Carpet using 0.27cum of 13.2mm size chips to 5.6mm size crushed chips and 14.6Kg penetration Grade Bitumen for 10 sqm including hand packing to proper camber and consolidation with PRR including hire & running charges of PRR hotmix plant, bitumen boilers and all other T&P articles complete including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-Charge.

Providing and laying 6mm thick pre-coated seal coat Type-B using 0.06cum of 6.7mm size chips as per sieve analysis & 6.8Kg of Bitumen per 10 sqm area including hire & running charges of PRR, Hot Mix Plant, Tar Boiler and all other T&P articles etc.complete including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-Charge.

Earthwork in ordinary soil within 50m initial lead and 1.5m initial lift incluiding rough dressing and breaking clods to maxmimum 5cm to 7cm in size and laying in layers not exceeding 0.3m in depth including watering, ramming with cost, conveyance, royality with DMF & EMF @15% on royality amount and cost of labour, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Earth work in excavation of foundation in all kinds of soil in the structures upto 3m depth as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials, dressing of sides and bottom and backfilling with approved materials including cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and filling in foundation and plinth with sand including watering & ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge.