PROVN OF RAIN SHEDS FOR SEP KEWAL SINGH DWAR (TENALI GATE), SEP KARAM CHAND DWAR (DELTA GATE) AND PVC WALL PANELING IN URJANI ROOM OF BLDG NO T-38 (DPTC) AT DINJAN MIL STN

Amount

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50 m and making good surfaces in soft/loose soil complete all as specified and as directed.

Materials and labour for Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface with Broken stone or boulders complete all as specified and as directed.

Materials and labour for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Materials and labour for plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Materials and labour for brick work with sub class 'B' burnt clay bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

Supply & fixing Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

Supply & fixing 5mm PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Supply & fixing PVC insulation panels with EPS stuck to 1mm plain PVC sheet of 10mm thick PVC insulation panel suitably placed in false ceiling grid made of Aluminium/G.I/M.S as per specification and drawing, complete all as specified and directed.

Supply and fixing mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be filled with washers and one hexagonal or square nut 16 to 20mm dia shank and exc 15cm but n exc 22.5cm long all as specified and as directed.

Supply & fixing mild steel angles or tee sections, fixed independently , without connecting plates etc as in splited end fencing post, Fe 410-W (Gde-E-250) quality A including drilling holes complete all as specified and as directed.

Supply & fixing MS framed work as in doors/gates of angle or other section with gusset plates, rails braces, etc, complete drilled for fixing of steel sheeting or other covering, using steel Fe 410W (Gde-E-250) quality 'A', door etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

Materials and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Materials and labour for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Supply & fixing fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc, complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

Materials and labour for chequered cement concrete tiles 30cm x 30 cm size, 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.

Materials and labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection etc. finished the surface of concrete fair and even, complete all as specified and directed.

Materials and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as sub base of flooring complete all as specified and directed.

Materials and labour for rendering 10mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and fair and applying three coat of white wash including preparation of new plaster surface of wall, complete all as specified and directed.

Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.

Materials and labour for applying one coat of white wash on old decorated Ceiling surface including preparation of surface, complete all as specified and directed.

Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Preparation of old steel surfaces of any description over 10cm width or grith and applying a coat of synthetic enamel paint complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 110mm bore pipe single socketed, in any length with rubber ring joints fixed to wall, complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.

Materials and labour for point wiring with two single core PVC FRLSH insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one PVC FRLSH insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including suitable size of PVC conduit (medium grade) with all fittings & accessories including sunken type pressed steel terminal box of suitable size with plastic laminated white/coloured top bakelite sheet cover 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

Supply and fixing Switch piano, flush type 240 Volts, single pole, one way switch 5 Amps complete all as specified and directed.

Supply and fixing Recess mounted 2x2 ceiling light 42 Watt deep drawn CRCA housing with higher power LED Seamless front frame with flat white hight transmission acrylic cover all as specified and directed. (Make : Havells Cat No PLANO2X2PLR42WLED865S or equivalent model in make Crompton/Phillips/Bajaj)

Supply & fixing 80 W flood loght LED building security new generation energy saving and environmental friendly long life LED flood light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 66 protection and inpact resistance of IK07 complete all as specified and directed. (Make : Havells Cat part No JETAALBAFLOODLIGHT80W or equivalent model in make Crompton/Phillips/Bajaj).

Supply and fixing in repair of MCB Distribution board SPN 8 Way for mounting SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply and fixing MCB Single pole, 240 volts 32 Amps 10 KA rupturing capacity, C series complete all as specified and directed.

Supply and fixing MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity, C series complete all as specified and directed.

Supply and Laying well burnt bricks, sub class 'B' bricks laid breath wise along length of cable in trenches for cable protection laid for UG cable protection complete all as specified and directed.

Materials and labour for clear sand cushioning for protection of cable complete all as specified and directed. (only punned down thickness to be measured)

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.

Materials and labour for GI pipe light grade with all fittings complete grouted in ground all as specified for 40 mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

M/S. UDDUG CONSTRUCTION

M/s GANDHESWAR PHUKAN

FREEZCON

M H KHAN

M/S BORAH BROTHERS

NChetia and Sons Trading

STANDARD ELECTRIC WINDERS