Repair to floor, plaster, joinery, day to day maintenance, plumbing, water supply fittings, glass panes, water tanks for entire Zone IV Raipur Satwari under GE Satwari

Amount

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing the rubbish from the work site out side defence premises complete all as specified.

Material and labour for Reinforced cement concrete, 1:2:4 (Nominal Mix ) as in slabs supported on walls, beams and columns and the like slab laid in slopes all as specified and directed.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding terrazo dado from wall surface (but not backing) removing serviceable tiles to store and rubbish off the premises Complete all as specied and directed.

Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.

Dismantling of CGI or plain or corrugated steel sheeting, any gauge thickness including nanital or similar pattern roof covering.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm & n.exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking up or down steel tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Taking down CPVC pipe 20 mm/25 mm dia and connection and incl cleaning for refixing or removal complete all as specified and as directed.

Outsourcing of manpower to attending complaints of plumbing work etc as instructed by concerned JE with complaint slip and report back to the same JE including maintaining of the record of complaint slips after getting signature of users complete all as specified and as directed by Engineer-in-charge.

Supply only brass face for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, etc for 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.

Supply only brass jumper washer for CP/Brass Bib tap, Angle/stop cock, Pillar cock, wall mixer, WHB mixer, etc , for 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.

Supply only PVC Knob or flushing handle for flushing cistern of capacity 10.0 litres , complete all as specified and as directed by Engineer-in-charge. (Sample as approved & kept in GE's sample room)

Supply only PVC float valve suitable for flushing cistern of capacity 10.0 litres complete all as specified and as directed by Engineer-in-charge. (Sample as approved & kept in GE's sample room).

Supply only PVC syphonic kit for flushing cistern of capacity 10.0 litres,complete all as specified and as directed by Engineer-in-charge. (sample as approved & kept in GE's sample room)

Supply only PVC bend suitable for flushing cistern of capacity 10.0 litres, complete all as specified and as directed by Engineer-in-charge. (Sample as approved & kept in GE's sample room).

Supply only PVC syphon washer suitable for flushing cistern of capacity 10.0 litres complete all as specified and as directed by Engineer-in-charge. (Sample as approved & kept in GE's sample room)

Repairs to steel window, ventilators of any size to make it functional (including slot pin, hinge, hook and eye of standard quality where required), resecuring of windows wire gauge and railings/grills by using welding equipments, complete all as directed.

Repair/ easing of wooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc all as per Engr-In-Charge.

Material and labour for repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable all as specified and directed by Engr-in-charge.

Material and labour for repairing Aluminium door locks ( Sample approved by Engr-in-charge)

Supply and fixing Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of 2nd class HW, complete all as specified and as directed by Engineer-in-charge.

S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified.

S&F pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified.

Supply and fixing Factory made, plain framed, panelled shutter (two Panel) 35mm thick, 2nd class Hardwood with lock rail and panel of 9 mm B.W.P commercial ply. The size of rail and stiles as per as per IS:1003 (Part-I),kiln seasoned and chemically pressure treated complete all as directed by Engr-in-Charge.

Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified

Supply and fixing 30mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (b) complete all as specified

S&F Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid PVC Moulded door shutter.28 to 30 mm thick (Stiles) with particle board core with 2, 4 ,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm Prelam PVC sheet on back face, to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the framme at site as per specification and drawing, complete all as specified and as directed by Engr-in-Charge.

M&L 18 mm thick PVC board one side UV printed designing and back side plain colour printed for cub board boxes or kitchen cabinet with shelf, drawer, shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

S&F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

S&F butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for stainless steel Butt hinges, 100mm , complete all as specified and as directed

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length complete all as specified and as directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

S&F magnet door catcher complete all as specified.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( ISI Marked)

S&F in repair Magic eye ( eye door viewer) complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified..

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty hydraulically complete all as specified..

S&F in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 65 mm including complete accessories complete all as specified.

Supply and fixing in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)

S&F in repair Decorative Aluminium curtain rod 19/20mm dia powder coated including pair fancy type bracket etc complete fixed to wall Complete all as specified.

M&L Aluminum Power coated sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete.

Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

S&F Steel windows/ventilator 'Z' section, double shutter ( wire gauge and glazed shutter) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified

Supply and fixing Single shutter steel ventilators of Z section with top hung shutters including projecting type hinges with steel handles, 2 Nos steel tower bolts on each shutter, 100 mm long peg stay complete with glazing bars, dovetailed or welded including locking arrangements complete as per drawing all as directed by the Engineer-in-charge.

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding) all as specified.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

Securing glass of any description in existing wooden and iron frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work ( New length of frame reputtied shall be measured.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified fixed with stainless steel wire staples.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified fixed with stainless steel wire staples.

Outsourcing of manpower to attending complaints of carpenter/joinery work such as door, cupboard, shelfs, built in writing tables, hinges,handle, tower bolt,curtain rod, cabinet, wire mesh etc as instructed by concerned JE with complaint slip and report back to the same JE, including maintaining of the record of complaint slips after getting signature of users complete all as specified and as directed by Engineer-in-charge.

Supply only Butt hinges of size 100 mm.(ISI marked) i complete all as directed.

Supply only Aluminium anodised, barrel tower bolts size 150 mm of extruded section complete all as specified. (ISI Marked)

Supply only Aluminium anodised, barrel tower bolts size 200 mm of extruded section complete all as specified. (ISI Marked)

Supply only aluminium door handle cast type of size 100mm complete all as specified and directed.

Supply only aluminium door handle cast type of size 150mm complete all as specified and directed.

Supply only Aluminium alloy, anodised, sliding door bolt size 250mm (length of bolt) with hasp, staple (bolt type) complete al as specified. (ISI Marked)

Supply only Galvanized MS wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm including wooden beading.

Supply only mild steel ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete all as specified.

S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available all as per directed and specified. Make :- Jaquar Cat no CQT-23167B or equivalent in kohler/ Artize

Supply and fixing in repair wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified Make :Jaquar, Cat No-CQT-23219 or equivalent in kohler/ Artize.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified. Make:- Jaquar, Cat No:- CQT-23281UPR or equivalent in kohler/ Artize.

S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified. Make :- Jaquar, Cat No- HSH-CHR-1731 or equivalent in kohler/ Artize.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent in kohler/ Artize.

S&F in repair Sink Cock with swinging casted spout with aerator. Make:- Essco, Cat No-SQT-522KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Pillar cock long neck with aerator 15mm dia cast copper alloy fancy type complete all as specified.Make:- Essco, Cat No-SQT-508KN or equivalent in kohler/ Jaquar.

S&F in repair Bib Cock cast copper alloy, chromium plated fancy type long body with wall flange & aerator fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:-Essco, Cat No- SQT-526KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069) complete all as specified. Make:- Jaquar, Cat No:-CQT-23069K or equivalent in kohler/ Artize.

S&F in repair Bib Cock with nozzle, cast copper alloy, chromium plated fancy type Quarter turn fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Jainko or equivalent in kohler/ Artize/ Jaquar.

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:- Jainko or equivalent in kohler/ Artize/ Jaquar.

S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko or equivalent in kohler/ Artize/ Jaquar.

Supply and fixing in repair CP health faucet (hand shower) with 1 meter long easy flexible tube in chrome finish with wall Hook (Holder) complete all as directed by GE/Engineer-in-charge . Make: Jaguar Cat Part No ALD-CHR-565 or equivalent in kohler/ Artize.

S&F in repair CP Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange. Make:- Jaquar, Cat Part No- PRS-CHR-077 or equivalent in kohler/ Artize.

S&F in repair CP Urinal Spreader complete all as specified. Make:- Cera, Cat No:- F8070201 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Chromium plated, single towel rail 600mm long complete all as specified. Make:- Essco, Cat No-AEC-1111 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Chromium plated, towel ring , complete all as specified. Make:- Essco, Cat No- AEC-1121 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair stainless steel Shop dish with PU foam complete all as specified. Make:- Essco, Cat No:- AEC-1131 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair stainless steel Tumbler holder complete all as specified. Make:- Essco, Cat No:- AEC-1141 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair chromium plated toilet roll holder, complete all as specified. Make:- Essco, Cat No- AEC-1151 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in kohler/ Artize.

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar Cat No- ACN-1173 or equivalent in kohler/ Artize.

S&F in repair waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified . Make :- Jaquar Cat No- ALD-CHR-705 or equivalent in kohler/ Artize.

S&F in repair waste coupling of chromium plated brass 40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified . Make :- Jaquar or equivalent in kohler/ Artize.

S&F in repair waste coupling of chromium plated brass 50 mm dia with long screwed shank and fly nuts complete all as specified . Make :- kohler/ Artize/ Jaquar.

S&F in repair chromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., complete all as specified. Make :- Jaquar Cat No- ALD-CHR-769L250X190 or equivalent in kohler/ Artize.

S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified. Make :- Jaquar Cat No- ALD-CHR-805B or equivalent in kohler/ Artize.

S&F in repair 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified. Make :- Jaquar Cat No- ALD-CHR-803AB or equivalent in kohler/ Artize.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag Cat No:- 323 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- kohler/ Artize/ Jaquar.

S&F in repair PVC connection 15 mm x 450 mm including PTMT nut at both ends screwed for iron pipe of 15 mm bore. Make:- kohler/ Artize/ Jaquar.

S&F in repair PVC connection 15 mm x 600 mm including PTMT Check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag/ kohler/ Artize/ Jaquar.

S&F in repair Overhead Shower 80 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange complete. ( For Shower Make:- Essco, Cat No-EOS-541RB or equivalent in kohler/ Artize/ Jaquar.) & ( For Shower Arm Make :- Essco Cat No- ALE- 536A or equivalent in kohler/ Artize/ Jaquar).

S&F in repair Jet Spray (Stainless Steel) with 1.5 meter Tube complete all as specified. Make:- Prayag, Cat No- BEA-17 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera Cat No- S4020112 or equivalent in Jaquar/ Hindware.

S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified. Make :- Cera Cat No- S2030104 or equivalent in Jaquar/ Hindware.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair full pedestal for WHB complete all as specified. Make :- Cera, Cat No- S2090113 or equivalent in Jaquar/ Hindware.

S&F in repair Corner Wall Hung Basin with Fixing Accessories Set, Size : 400 x 400 including CP Waste coupling and PVC waste pipe complete all as specified. Make :- Cera Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera Cat No- B1010107 ( CABRINA) or equivalent in Jaquar/ Hindware.

Supply and fixing in repair PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.Make: CERA Cat No- B1510105 or equivalent in Jaquar/ Hindware.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. Make:- Cera, Cat Part No- S1051103 or equivalent in Jaquar/ Hindware.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Jaquar/ Hindware.

S&F in repair Bib tap long body of PTMT any colour high pressure screwed for iron pipe and fixed. Make:- Paryag, Cat No:- 124-C or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Pillar cock fancy type 15 mm with foam flow complete all as specified. Make:- Prayag, Cat No:- 131-C or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Grating Round 100 mm dia complete all as specified. Make:- Prayag. Cat No- 111 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Grating Round ( with waste hole) 125 mm dia complete all as specified. Make:- Prayag. Cat No- 113 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Shelf 450 mm long complete all as specified. Make:- Prayag Cat No- 191 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Corner Shelf 200 mm long complete all as specified. Make:- Prayag. Cat No- 192 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Soap Dish/Oval, complete all as specified. Make:- Prayag Cat No- 195 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Towel rail 450 mm long, complete all as specified. Make:- Prayag Cat No- 199 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Shower rose Round size- 75 mm dia with 225 mm long shower arm with flange, complete all as specified. Make:- Prayag. Cat No- 199 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Jet Spray ( with 1.00 mtr Tube), complete all as specified. Make:- Prayag, Cat No- 521 or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 32mm bore of required length complete .Make: Prayag Cat No 329 or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 40mm bore of required length complete for sink/WHB . Make: Prayag or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 50mm bore of required length complete . Make: Prayag or equivalent in Polytuf/ Jindal.

Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks and removing to store of water storage tanks (Cap. 250 ltr to 500 ltr ) complete all as specified and directed by Engineer-in-charge.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Disconnecting existing tanks, 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including reconnecting and re-fixing in position complete all as specified.

Cleaning and removing all scale and dirt etc, from exc 250 & n exc 500 litres capacity tanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also containing completion from user complete all as directed.

Cleaning and removing all scale and dirt etc, from exc 500 & n exc 1000 litres capacity tanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also containing completion from user complete all as directed.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 25 mm bore pipe, including making connections complete all as specified and fixed.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed.

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms).

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 25mm-455 gms).

S&F in repair PVC tank covers required for 500 ltr to 1000 ltr PVC water tanks complete all as specified and fixed

Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge

Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing tubes 'medium grade' galvanised, 25 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing fittings for steel tubing galvanised 15 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed

Supply and fixing fittings for steel tubing galvanised 20 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed

S&F 20 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reducer, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors. Make:- Finolex, Kishan, Prayag.

S&F 25 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reducer, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors. Make:- Finolex, Kishan, Prayag.

M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. Make:- Prayag, Cat No- FT-03, or FT-04 or equivalent in Essco, Cera.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed.

Supply and fixing UPVC (SWR) type B pipes 50 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC (SWR) bends with access door for 75 mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC(SWR) bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed.

Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed.

Supply and fixing, UPVC branch piece, double (double 'Y') with access door for 75 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

Supply and fixing, UPVC branch piece, double (double 'Y') with access door for 110 mm bore complete all as specified and directed.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) reducers 110 mm dia complete all as specified.

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

Supply and fixing in repair UPVC (SWR) floor trap 75 mm bore type B, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair 75 mm bore UPVC (SWR) multi floor trap type B plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-In-Charge.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)

Material and labour for preparation of surface, free from dirt, dust & loose particles, thoroughly wire brushed & cleaned by vacuum cleaner. Washing the surface with water, removing of all oil & grease substance using degreasing solvents. Any damaged surface must be repaired by using polymer modified repair mortar with Dr. Fixit Pidicrete URP. Thereafter clean the surface saturated with water and remove the excess water, if any, and bring to touch dry state. Apply the first coat of the mixed solution @ 0.75 Sqm/Kg, (1 mm thick for 2 coats) Dr Fixit Pidifin 2K on the prepared surface & allow to dry for 4 to 6 hours. Prepare another batch of Dr Fixit Pidifin 2K and apply 2nd coat in direction 90 degree to first coat. Over it lay a protected screed, using cement sand 1:3 along with Dr Fixit LW+ complete all as specified and as per the manufacture instructions.

Plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate), as in sunken floors ( upto 4th floor) mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the Cantt area complete all as directed

Material and labour Non - skid Digital Ceramic jointless coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15 mm thick screed bed in CM 1:4.

Description all as item No 191 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

Material and labour glazed ceramic coloured Digital tiles in vertical surface 200x300x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over 10 mm thick CM 1:4 all as specified.

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over 10 mm thick CM 1:4 all as specified.

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15 mm thick screed bed in CM 1:4.

Description all as item No 195 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

Material and labour Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over 15 mm thick screed bed in CM 1:4.

Description all as item No 197 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

Machine cut kota stone slab (Minimum size shallbe 550x550 mm) flooring 18 - 20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Machine cut kota stone 10-12 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, as in vertical surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour for grinding,rubbing and mirror polishing with machine on existing kota stone/moisac flooring/skirting laid in position including all necessoy repair work and filling of joints with grey cement mixed with pigment to match the shade complete all as directed by the Engineer-in-Charge.

Material and labour for Precast factory made chequered designer tiles (Rectified interlocking tiles) 300x300 mm glazed top made in white cement and pigment base of thickness not less than 19 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set and jointed in neat cement slurry(colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4 . all as specified and directed by Engr-in-Charge.

Material and labour for precast factory made designer tiles (Rectified interlocking tiles) glazed top complete made in white cement and pigment of thickness not less than 19mm in different colour and pattern (compressive strength not less than 250 kg/sqcm) set and jointed in neat cement slurry (colour and pattern as per sample kept in GE office as approved by GE) laid over and including 20mm thick screed bed in CM 1:4 all as specified and directed by Engr-in-Charge.

Machine pressed precast concrete interlocking paver block coloured with glazed finish (Laqquere finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (with grey cement and no pigment) laid dry over sand cushion of average thicknedss 25 mm duly consolidated, set and levelled complete all as specified and size directed by Engr-in-Charge.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick CM 1:4 as directed by Engr-in-charge.

Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

material and labour for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in kerb stones, kneelers, apex stones,pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders with plain fair faces. including chamfers, weatherings, throatings etc. and setting in cement mortar 1:6 complete all as specified and directed. Note :- Form work required for these items included in the unit rate of this item.

Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate) 50mm thick as in plinth protection and providing the joints throught the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all as specified and as directed by Engineer-in-charge.

Material and labour for precast cement concrete louvers and jallies, 40 mm thick (1:2:4) type B-0 (using 12.5 mm graded aggregate ) set in cement mortar 1:6, including all mouldings and dismantling old U/s broken Jallies at site, complete all as specified.

M&L for Plain cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.

M&L for Plain cement concrete M-15 (1:2:4), type B-0 (using 12.5 mm graded crushed stone aggregate) nominal mix, 25 mm thick, as in floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.

Dismantling of ceiling board (Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets complete all as specified and as directed by Engineer-in-charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.

Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Charge.

Supply & fixing in repair Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engineer-in-charge.

S&F Asbestos cement two pieces adjustable plain wing ridge 6mm thick fixed with GI `L` or 'J' type hook or cranked bolts all as spd.

Supply and fixing in repair 6 mm thick asbestos cement,corrugated or semi-corrugated sheets in roofs covering/cladding,walls,fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc complete all as specified.Make:Charminar,Everest,M/S Ramco Indus

Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheet grade 'O' with Zinc coating 120 gms/sqm, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roof,, walls etc. all as specified and directed. Make: TATA,Jindal (JSW), SAIL

Supply and fixing 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.

S&F Pre- painted galvalume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating (AZ-150 Micron) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails, vertical post and fastenings, heavy brackets framing (Beam, tee, angle, channel, squre hollow section or flat section) including distance pieces, cleats etc complete all as specified.

All as per Srl Item No. 222 here-in-before but in main and cross beam, hip and jack rafters, purlins, plates (plain or chequered), channels, square cut or notched etc.

Supply and fixing in repair roller blinds with control unit made of high strength reinforced plastic,clutch with wrap spring design,operated by endless beaded chain including idler mounted on bracket by plastic lock center shaft and aluminium exluded rail powder coated including braces ,anodised tube of high strength alloy roller tube,bottom rail (aluminium extruded tube and 4.5 mm thick plaster beads on 2.2 mm thick polyster chord operating chain,colour and pattern as per Engr- in-charge /GE.

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Prayag, Cat No- 1239D & equivalent in Nirali, Jayana.

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 460mm x 405mm x 203 mm bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Prayag Cat No- 1216D. & equivalent in Nirali, Jayana.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 600mm x 900mm x 250mm fixed with steel fastners or steel screw complete. Make:- Prayag, Cat No- P-336 and equivalent in Jayana.

Complete removal of the existing roof treatment including grubbing up of tree roots and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :-(a) Applying 1st course of 15mm thick screed bed in cement mortar 1:4 on concrete surfaces.(b) Applying 2nd course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely.(c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. All joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying membarance.(d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. Make: IWL, STP Ltd, Pidilite Industries Ltd

M&L Hydraulically pressed burnt clay tile plain of size 200x200x19/20 mm machine made laid over & including cement mortar screed 15 mm thick in CM 1:6 mixed with water proofing compond and jointed, pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed by Engineer-in-charge.

Cutting grooves in brick wall 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge.

Supply only Water proofing compound liquid.

Cleaning of roof surfaces of RCC roof (any type) tiles with brush and removing all vegetation, plants, roots, grass, leaves any type of material asked to remove at any height of bldg or any part of bldg complete all as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out upto 4th storey of bldgs also as per pirection of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Rendering 10mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.

Rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including two coats of wall care putty of 1 to 2 mm thick on uneven surface as and where required.

Material and labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M&L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M&L for preparation of new decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc and applying one coat of white wash on ceiling.

Supply and fixing TMT bars 10mm dia and over cut to length, bent to shape required including cranking, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia, all as specified .

Use and waste of form work to soffits of suspened slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for repairs of rolling shutter Area n.exc 5 sqm any type(push pull or manual or gear operated) after opening hood cover and without taking down rolling shutter,by cleaning greasing oiling and replacement of rusted nut bolts including welding as requires for smooth functioning including necessary oiling/greasing,welding , etc after cleaning of the side guided channels of rolling shutters complete all as specified and as directed by Engineer-in-Charge.

M&L for repairs of rolling shutter Area exc 5 sqm but n.exc 10sqm any type(push pull or manual or gear operated) after opening hood cover and without taking down rolling shutter,by cleaning greasing oiling and replacement of rusted nut bolts including welding as requires for smooth functioning including necessary oiling/greasing,welding , etc after cleaning of the side guided channels of rolling shutters complete all as specified and as directed by Engineer-in-Charge.

M&L for repairs of rolling shutter Area exc 10 sqm but n.exc 20sqm any type(push pull or manual or gear operated) after opening hood cover and without taking down rolling shutter,by cleaning greasing oiling and replacement of rusted nut bolts including welding as requires for smooth functioning including necessary oiling/greasing,welding , etc after cleaning of the side guided channels of rolling shutters complete all as specified and as directed by Engineer-in-Charge.

Taking down existing unserviceable rolling shutter complete of any size & any type all as directed.

S&F steel rolling shutters of 1.25mm thickness laths without ball bearing as specified including top cover,anchoring rod,hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type

S&F steel rolling shutters of 1.25mm thickness laths with ball bearing as specified including top cover,anchoring rod,hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle.

S&F in repairs steel ball bearing suitable for rolling shutter for smooth functioning of rolling shutter of any size or any type

S&F in repairs 40mm bore MS pipe medium grade as in suspension shaft for rolling shutter for smooth functioning cut to size incl necessary/drilling/grinding complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 50mm bore MS pipe medium grade as in suspension shaft for rolling shutter for smooth functioning cut to size incl necessary/drilling/grinding complete all as specified and as directed by Engineer-in-Charge.

S&F in repair steel spring suitable for rolling shutter for smooth functioning all as directed.

Supply and fixing in repair safety lever locks steel with 4 levers for rolling shutters complete all as specified and as directed (ISI marked).

S&F Gear box assembly for rolling shutter including rod,required nuts,bolts ,cleats crank handle etc.complete of standard make and fixed in position including one shop coat of primer including removal of old gear box assembly and other accessories all as specified and as directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs

M/s Rajesh Mehra