Construction car parking at block A at Ram Leela ground at Reckong Peo District Kinnaur Prov pumps and ring main system therein

Amount

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.

80 mm Dia

100 mm Dia

150 mm Dia

Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.

80 mm dia

100 mm Dia

150 mm Dia

supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 450mm in diameter and 2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried.

SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect.

Providing fixing,testing and commissioning of 15mmdia chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed)

Supplying installation,testing and commissioning of electric driven main fire pump suitable for aotumatic operation and consisting of following complete in all respect as required.

Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 1650 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.)

Suitable HP SQ cage induction motor 40 HP,TEFC,synchronous speed 2900 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation ,conforming to IS-325.

M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required.

(D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads.

Supply Insllation,testing,and commissioning Jockey pump with 10HP SQ cage induction motor,TEFC,synchronous speed 2900 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation,conforming to IS-325 for 180 LPM and 56 Metres head conforming to IS 1520 bronze impeller/SSansMechanical seal.MS fabricated common base plate,coupling,coupling guard,CCfoundation etcas requried.

Supplying installation,testing and commissioning of Desiel driven fire pump suitable for aotumatic operation and consisting of following complete in all respect as required.

Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 1650 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% of the rated head.)

Suitable 43HP 1500/1800 RPM deesel engine conforming to IS:649/IS:160/IS10002 all amended upto date, countnuous duty, multi cylinders vertical 4 dtroke cycle water cooled, developing suitable at operating speed specified to drive the fire pump capable of driving continous non-stop opreation for 8 hours having 10% overload capacity for one hour in a period of 12 hours continuous run ,capacity to accept full load within 15 seconds from the receipt of signal to start and complete with following accessories.

Dynamically balanced fly-wheel.

Direct coupling for pump and coupling guards.

Radiator with hoses .fan water pump,drivearrangement and guards

Air-cleaner dry type

Fuel tank with necessary pipe.

pump for fabricating oil and lubricating oil filter.

Electric starding system alongwith battery 12 V/24 V

Exhaust siliencer (residentail type) with necessary pipe work.

Governor

Instrument panel housing all the gauges including tachometer,hourmeter and starting switch with key (for manual starting)

Necessary safty control and stop solenoid in the event of fault.

Painted in post office red colour.

Common base plate fabricated out of MS channel of suitable size for assembling the pump and the engine fkexble coupling and with couplingguard for protection/safty.

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required.

Incomer

OUTING

Mains Fire pump.

iii)Pump on LED Induication Lamp -1 No

b) Jockey pump.

iii)Pump on LED Induication Lamp -1 No

Diesel Engine Control

Control for Diesel Engine Comprising

d) System Controller

Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification

Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK)

Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.

Armoured cable 35 sq. mm ( 3.5 core)

Armoured cable 70 sq. mm ( 3.5 core)

HIMACHAL FIRE CONSULTANTS AND ENGINEERS