Providing aluminium partition, SS railings, Clip in tile false ceiling for maintenance office and project office at substation near 312 flats type (V-E) at Old Mandala, Trombay, Mumbai

Amount

ABSTRACT SHEET

PART A : CIVIL WORKS

Description of Work / Item(s)

Amount

PART A : CIVIL WORKS

Providing and laying polyvinylchloride (PVC) tiles manufactured by M/s. Bhor/ premier/ Responsive or other approved equivalent make of thickness specified below of approved colour, pattern and designs for flooring, skirting/dado fixed with suitable adhesive as per manufacturer's specification including surface preparation etc. & disposal of debris outside colony etc complete all as directed by engineer-in-charge

a) PVC flooring 3mm thick 4" X 24" size (Wooden Textured emboss)

b) PVC flooring 6.5mm thick over existing flooring

Providing and fixing aluminium doors & partitions by using extruded section of M/s. Jindal make f0r equivalent. The extruded section [email protected] kg/m &no.22268@ 0.852 kg/m of M/s. Jindal may be used for partions & door frame & shutter, providing & applying approved colour anodising of Min 15 mircon including providing and fixing suitable C & H frame section outer frame and mullion/ transom fixing with screw, double tubular necessary scaffolding complete. all as per specification and as directed at site by the Enginer-in-Charge.

Providing & fixing following 10 mm thickness Bison panel at all floors & locations including fixing the sheet to existing wooden/ MS/ aluminium frame work with necessary screws, forming grooves as requried sizes, making necessary openings/ cut outs around electrical fixtures, AC grills & trap doors, fixing to correct lines and levels with beading, scaffolding etc. complete all as per the direction of Engineer-in-Charge.

a) 10 mm thick

Providing, fabricating and fixing in position at all floors & locations TRAC Clip-in tile false ceiling of approved make with unperforated tiles, comprising of 600mmx600mmx45 mm deep, two sides of each tile raised, pipped and stopped to ensure positive engagement into the spring tee and tiles made out of 0.7mm thick aluminium alloy AA 5050/3105 manufactured out of aluminium on advanced equipment, which includes several levelling stages in the manufacturing process, exposed surfaces of Aluminium tiles finished with 20 microns Epoxy Polyester coil coated over primer inshall be manufacturer's standard colour shade and backing coat on rear surface ( nominal 5 micron) on a continuous coil coating, line. including providing and fixing accoustic insulation on back of carrier profiles installed at correct spacing to support the tiles. suspension system comprising 0.5mm galvanised steel clip-intiles with Phenotherm. Tiles are suspended by means of a Suspension profiles are suspended from roof structure by GI ceiling brackets. GI supension angles and hold on clamps at max. 1200 mm centre to centre along the clip in profile including providing and fixing extra frame work around light fittings,exhaust, duct, grills for trap door with suitable fixing arrangement and edge profile, wall angles etc. to be fixed on side wall/wooden panelling and spot light cut out in false ceiling. Supplying and fixing TRAC Clip-in tiles at vertical area between slab and ceiling complete with all accessories and fixing suitable arrangement including cost of all materials, labour, tools, scaffolding etc., as required for completionof works and mking good the damged surfaces etc.complete all as per drawings and specfications and as directed by the Engineer- in- Charge.

a) False ceiling of unperforated Trac Clip-in tile.

Providing and fixing stainless steel work using SS-304 stainless steel sections such as perforated stainless sheet panels, seamless pipe/ tube of designed size square, tees, angles, plate, flat patti and other sections as required for work at all levels & locations with brushed finished/ satin matt finished at all locations as required, as per approved pattern & design including necessary S.S bend, tees, brackets, base/ cover plate and holders clamps to hold pans in all size & shapes etc. welding/ nut bolt necessary anchoring, polishing and fixing in concrete/ brick wall etc with S.S lugs/ anchor fasteners, making pockets, concreting, making good the surfaces including all wastage etc. as per specifications approved drawings including removing existing and as directed by Engineer-in-charge.

a) 2 mm thick perforated S.S. Sheet (SS-304) as per approved pattern.

b) Stainless steel for railing.

Providing, Fixing & assembling/ fixing at site Table top/ cupboard /shelves /wall cabinets etc. using following material of approved quality machine pressed phenol formal dehyde bonded marine plywood of IS 710 latest revision, and both face lamination with 1 mm thick lamination on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface of approved shade and make on both faces , all edges covering with 12 mm thick teak wood Patti or other approved equivalent , using approved glue for pressing, approved quality PVC wire manager for taking out all wiring etc. and carefully fixing to the vertical partition including all materials adhesives, S S screws labours, materials, wastages etc. all as per approved drawing and as directed by Engineer-in-charge. Note:- No separate measured for payment will be made for decorative laminate.

a) 19mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

b) 12mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

Supplying & fixing following fittings & fixtures to the door & partitions as directed by the Engineer-in-charge.

a) Night latch Full set with 7 levers, consist of latch assembly, safty latch, Round lock, Retainer plate, Dead lock suitable for doors of 35-40 mm thick, with 3 keys in orginal, inside opening door with safety like brass lever locking mechanism screws required, similar to M/s. Godrej make ( Cat No. 8261) or approved equivalent havinf same shape, size and dimensions.

b) Mortice lock with brass parts and body with 6 levers,of Godrej/ Everite make or other approved equivalent with stainless steel duplicate keys and pair of detachable, pressure diecast chromium plated handle with chromium plated brass screws for left hand/right hand and for single leaf shutter of 30mm to 40 mm thickness with brass socket plate. a) With handle on both sides of shutter.

c) Hydraulic door closure conforming to IS:3564 of heavy duty (as per approved make & design) with fittings and fixtures, necessary screws/bolts and other accessories a) Hydraulic door closure of Everite or equivalent approved (Right/ Left type)

d) Heavy duty SS butt hinges of size 125mm X 76mm X 2.8 mm of M/s Shalimar Hardware (ISI Marked)

e) ISI marked aluminium Bow Handle 100 mm. long with back plate, ' D ' section.

f) ISI marked aluminiumTower bolt 200 mm long

g) ISI marked aluminiumTower bolt 150 mm long

h) Superior Quality Aluminium door stopper Floor type with heavy quality rubber bush fixed with screw, complete set. The weight of aluminium door stopper without rubber bush and screw shall not be less than 25 gms each.

i) SS Aldrop(SS-304) 250 mm long , 16 mm dia Barrel. with extra locking arrangement of M/s Shalimar (ISI marked)

Providing and fixing in position the structural steel work at all levels & locations using M.S.sections of approved make such as ISJB, ISJC, Angle, Pipe, hollow rectangular & Square sections, flats, tee, square, bar, pipe, chequered plates, etc including cutting, wastage, welding, tools, labour, lifting, placing, transportation, loading, unloding etc and including two coats of synthetic enamel paint over one coat of steel primer etc complete all as per specification & as directed by the Engineer-in-Charge.

Providing, fixing, laying for installation of Sintex Package Domestic Waste Water Treatment Plant along with Treated Water Storage Tank. Sintex STP product code PWTS STBF-0120-01 L/D with Intermediate Tank IMT 1000 L/D product code UG-TWST-100-01 & Treated water storage Tank 1000 L/D product code UG-TWST-100-01 along with Tertiary Treatment Plant (TTP) 0.5m3/hr along with control panel. Following outlet parameters shall be achieved . I) Ph Inlet(6.5 - 8.5), Outlet(6.5 - 8.5) II) BOD Inlet(250-300 mg/l), Outlet(<10 mg/l) III) COD Inlet(400-600 mg/l), Outlet(<50 mg/l) IV) TSS Inlet(200 mg/l), Outlet(<50 mg/l) V) FOG Inlet(40-50 ppm), Outlet(<5 mg/l)

Providing & fixing in position at all levels & location the HDPE water storage tanks of M/s. Sintex or approved equivalent make of following capacity rotationary moulded Polyethylene (with 2.5% carbon black compound) water storage tank with SMC/ FRP cover conforming to IS 10146 and ISI marked, including providing & fixing lockable cover with suitable locking arrangements as approved by the Municipal Corporation / local statutory Body, placing and supporting the whole bottom area of the tank on existing base / platform, etc. complete all as per specification and complete all as directed by the Engineer-In Charge. (10,000 Litre Capacity cylindrical vertical type of M/s. Sintex or equivalent approved make ISI marked).

SUNLIGHT CORPORATION

Three Star Construction CO.

SUNLIGHT CORPORATION

Three Star Construction CO.