SPECIAL REPAIR TO BUILDING NO P113 (02 X JCOS QTR) BUILDING NO 246 (SINGLE LIVING) AND CERTAIN OTHER WORKS AT SUBATHU UNDER GE KASAULI

Schedule 'A' Section - I

Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof covering, complete all as specified.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick,having Zinc coating 150 gm per sqm (Az-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having Zinc coating 150 gm per sqm (Az-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling in framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position, complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and as directed.

Supply and fixing mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed.

Supply and fixing welded steel wire fabric fixed to wood or steel members, weight exc 4 kg per square meter complete all as specified and as directed.

Supply and fixing water storage tank 500 ltr capacity HDPE triple layer, white coloured, conforming to IS , fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe including taking down the unserviceable water tank and removing from site, complete all as specified and as directed.

Supply and fixing water storage tank 1000 ltr capacity HDPE triple layer, white coloured, conforming to IS , fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe including taking down the unserviceable water tank and removing from site, complete all as specified and as directed.

Supply and fixing ball brass valve 20mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Demolition of cement concrete (unreinforced), of any description and in any position, not otherwise specifically provided for, and removal of the rubbish/ demolished material outside defence land complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed.

Material and labour for plain cement concrete 1:5:10 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type C-2 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and ditected.

Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for providing reinforced cement concrete 1:11/2:3 type A1 (using 20mm graded mechanically crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roof, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

Material and Labour TMT steel bars of 8 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.

Use and waste of formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified.

Dismantling floor, hearth or wall tiling of any description (Ceramic/PCC/Terrazo) and any thickness, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

Material and labour Non Skid coloured ceramic tiles, joint free, premium/1st quality, 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 300x450 x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on brick / concrete surfaces of any description in cement mortar 1:4 complete, all as specified and as directed.

Stone slabs and tiles of any description or thickness in floors , aprons etc. (Demolition Laid, bedded and pointed in any mortar) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 18-20mm thick granite (of any type) work (table rubbed and polished and moulding) in kitchen platforms over and including 10mm thick in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified.

Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cooking platforms and likes complete all as specified

Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed.

Material and labour for 2nd class hardwood clean sawn in scantlings, in any position in unframed work,complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkats or frames area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge.

Taking down chowkats or frames area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge.

Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and refixing in the same opening after erasing complete all as specified.

Resecuring or easing and adjusting without taking down Shutters of any description exc. 1 sqm each and not exc. 2 sqm each complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fast, copings, bed plates and the like, finished the surface fair and even, including necessary form work complete all as specified and directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with sheet and fixed in opening complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified.

Supply and fixing stainless steel butt hinge of 100mm length, medium weight, ISI marked complete all as specified and directed.

Supply and fixing in repair stainless steel butt hinge of 100mm length, medium weight, ISI marked complete all as specified and directed.

Supply and fixing 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed .

Supply and fixing in repair 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed .

Supply and fixing, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .

Supply and fixing in repair, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .

Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 125mm size, ISI marked, complete all as specified and directed .

Supply and fixing in repair, extruded aluminium alloy handles with plates, fabricated type, anodised 125mm size, ISI marked, complete all as specified and directed .

Supply and fixing in repair, Hasp and staple Size of 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, ISI marked, complete all as specified and directed.

Supply and Fixing Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed .

Supply and fixing double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed .

Supply and fixing in repair, double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed .

Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :- (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf . (c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf .

item No. 48.00 (contd..) :- (vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf (vii) 10mm square Guard bar @ 10 cm c/c welded to frame . (viii) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and as directed by the Engineer-in-Charge. (ix) Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm. (x) Sheet glass 4mm thick, ordinary quality & glazing with oil putty in sqm not exceeding 0.5 Sqm in each pan or with wooden beads to wooden shutter. Notes :- (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessories as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. (Noted: Guard bars and shutter glass & wire mesh measured separately).

Supply and Fixing Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for both glass and wire mesh type with glazing bars (measured each separately) and 04 nos pintle hinges & 04 Nos 150mm mild steel tower bolt, 02 nos steel peg stay, 02 nos steel handle to each shutter dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (Note: Guard bars and shutter glass & wire mesh measured separately)

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing (in repairs) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

Supply and fixing figured glass 3mm thick pin head type, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified.

Supply and fixing for sheet glass 4mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Square metre in each pane or with wooden beads to wooden shutters, complete all as specified.

Supply and fixing for sheet glass 4mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Square metre in each pane or with wooden beads to wooden shutters, including hacking out old broken galss, complete all as specified.

Material and labour for Prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified.

Material and labour for Prepration of new painted wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directed.

Material and labour for Preparation of old steel surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Material and labour for Preparation of old wooden surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall with finals/finnels, connected accessaries, rubber packing, required screws and rawal plugs, fixed in repair, complete all as specified and directed.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed by Engr-in-charge.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified. ( Note- The serviceable bricks obtained from Serial item No- 62.00 will be used after removing motar, cleaning the bricks with water, etc.)

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. including removal the rubbish/ demolished material outside defence land, complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick work or concrete wall surfaces at any height in cement mortar 1:4 mixed with water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge. ( Note- WPC shall be measured and paid separately).

Supply only integral water proofing compound, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of exterior emulsion paint with hand roller, over a coat of primer on plastered surface complete all as specified and directed

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for rendering 05 mm thick on fair faces of brick work or concrete ceiling surfaces, chajjas, etc. in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of new plastered/unplastered surfaces and applying two coats of white lime wash on surfaces of ceiling, chajjas, roof projection complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour applying 3 mm thick wall care putty white cement based in two or more coats to achive smooth surfaces complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller over a coat of primer, complete all as specified and as directed.

Material and labour for complete removal of old existing treatment of surfaces and after that 3mm thick wall care putty to obtain smooth regular/ even finish using sand paper and applying two coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge.

Material and labour for complete removal of existing treatment of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified.

Material and labour for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc on surfaces of ceiling of any description and applying two coats of white lime wash complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed .

Supply and fixing of 15mm dia tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed .

Supply & fixing of 20 mm dia tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Refixing steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Refixing steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Supply and fixing in repair, cast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wall and laid in trenches or in floors complete, all as specified.

Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wall and laid in trenches or in floors complete, all as specified and directed.

Supply and fixing in repair stack clamps 50mmx5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof for 75mm pipe, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair 100mm dia CI ‘P’ or ‘S’ trap complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of cast iron Bend 100 mm dia with duck's foot or heel rest complete, all as specified and directed.

Supply and fixing of cast iron 'T' junction 100 mm dia with or without oval acess door complete, all as specified and directed.

Supply and fixing of cast iron sockets (double) collars, 100mm dia complete, all as specified and directed.

Supply and fixing of cast iron Branch pieces 100mm, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete, all as specified and directed.

Supply and fixing of cast iron bends (any radius) 75mm dia diminishing pieces or tapers complete, all as specified and directed.

Supply and fixing of cast iron bends (any radius) 75 mm dia ,diminishing pieces or tapers fitted with oval access door, complete, all as specified and directed.

Supply and fixing of cast iron sockets (double) collars, 75mm dia complete, all as specified and directed.

Supply and fixing of cast iron branch pieces, 75 mm dia, single (equal or unequal), ordinary or inverted or with parallel branches complete, all as specified and directed.

Supply and fixing of cast iron 'T' junction 75 mm dia with or without oval acess door complete, all as specified and directed.

Supply and fixing of Cast Iron cowl 75/100 mm dia complete, all as specified and directed.

Supply and fixing in repair, Cast iron floor trap 75mm dia of outlet with grating, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete and making good the disturbed surface to match the existing surface and after taking out the existing floor trap, complete all as specified and directed.

Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed.

Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed.

Supply and fixing in repair, stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with sliding flange, screwed both ends for 15mm bore pipes or for unions complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 150mm size with or without swivel joint with arm of standard size fixed to existing steel pipe or union 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair, chromium plated central hole wash hand basin mixer with regular spout without Popup waste system with 450mm long braided hoses all as specified.

Supply and fixing in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bore complete all as specied and directed.

Supply and fixing in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 15 mm bore complete all as specied and directed.

Supply and fixing in repair, vitreous china, wash hand basin, white, flat back, of size 550x440mm including painted CI brackets, embedded in wall in CM 1:4, with and including suitable size PVC waste pipe, PVC connections and chromium plated waste coupling, etc., complete all as specified and as directed.

Supply and fixing in repair, vitreous china coloured squatting pan of orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including making good to existing floor surface and connection to flush pipe etc. complete all as specified and directed.

Supply and fixed (in repair), vitreous china wash down water closet pedestal pattern, coloured including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray suitable for EWC with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified.

Supply and fixing in repair, stainless steel sink, 1.00mm thick for kitchen, with waste coupling, 32 mm, Hard PVC flexible waste pipe, washers, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union etc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm complete.

Supply and fixing in repair stainless steel plate rack, made out of 1.00mm thick sheet of size 24"x36"x10" deep, ISI marked, fixed as in repairs complete all as specified and directed.

Supply and fixing of brass chromium plated tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing in repair , Health Faucet with 8mm dia, 1metre long flexible tube and wall hook complete all as specified and directed. Make- Jaguar, brand Allied Cat No 573 and equivalent in ESS-ESS or Galaxy.

Supply and fixing in repair of virgin polypropylene cistern, 10 litre capacity, ISI marked, coloured, low level complete with PVC bend/flush pipe and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in repair, PVC connections 450mm long with PTMT nuts and PVC washers on both ends fixed to 15 mm bore of pipe complete all as specified and directed.

Supply and fixing in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing in repair,, soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets and false ceiling frame work of any size/ description complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of GI Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, and as directed by Engineer-in-charge. GI Metal Ceiling laying perforated Tengular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. Note- Ceiling tiles and ceiling grid shall be of the same make.

Material and labour for applying water proofing treatment to sunken slab comprising of the following specifications complete all as specified. (i) Cleaning of roof surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material,dirt,dust etc. (ii) 15mm thick cement plaster on concrete surfaces in cement mortar (1:3) using and including water proofing compound @3% by weight of cement finished even and smooth without using extra cement, (iii) First layer of cement slurry @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm of approved make and allowed layer to air cure for 04 hours. (iv) Second layer of cement slurry @ 0.244 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed layer to air cure for 04 hours.. Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators and contractor shall also provide 07 years Guranttee for water proofing treatment carried out in the work. Sunken slab will be tested for 48 hour before carring out other works in sunken floor.

Material and labour, coloured chequered cement concrete tiles 300x300x25mm thick, factory made, ISI marked (IS 13801-1993), with grey cement & pigment, laid with neat cement slurry as in path, pavement ,floors, etc. @ 3Kg/Sqm over & including 20mm thick screed bed of cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed.

Material and labour for factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing Hasp and staple Size of 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, ISI marked, complete all as specified and directed.

Supply & Fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge

Supply and fixing in repair, CP grating doom (openable type) 100mm dia with or without waste hole both.(minimum weight 25 gms) complete all as specified and directed.

Supply and fixing Factory made pressed steel frames for doors fabricated from 1.25 mm thick sheet, with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 125 x 60 mm, complete all as specified

Supply and fixing Factory made pressed steel frames for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 105 x 60 mm, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made flush shutters 30 to 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing factory made flush shutters 25 to 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing in repair magnet catcher 75 mm brass body fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair, mild steel, wire, type I, Gate and shutter, hooks and eyes 75mm complete all as specified and directed .

Supply and Fixing in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified and directed . .

Excavation in post hole or similar holes in hard/dense soil each not exceeding 0.50 Cum including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to distance not exceeding 50metre and making good surface, complete all as specified and directed.

Supply and fixing for post or struts in fencing mild steel angle iron 75 x75 x 6mm or other flat or round sections as required including cutting at top and bottom to shape as directed , including welding the cut portion at top , drilling holes, notching for wires etc and mild steel iron flat 50x 5 mm connecting struts to posts with 3 Nos mild steel bolts 50mmlong 10 mm dia and washers , complete all as specified and directed.

Supply only chain link fencing of 4mm dia mild steel galvanized wire and mesh size 100x100mm, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Material and labour for mild steel round bars 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and necessary welding work conforming to Fe-410-W (Gde.E- 250), complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed.

M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by the Engineer-in-Charge

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall surfaces and on surface on ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. and making smooth the disturbed surfaces as per existing for one light/fan/exhaust fan point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) .All chases will be cut by chase cutter only. b) Switch, socket outlet and fan regulators to be measured and paid for separately .

Description Same all as per item No. 140.00 but one bell point controlled by one way switch, complete all as specified and as directed.

Description Same all as per item No. 140.00 but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed.

Description Same all as per item No. 140.00 but for One 3 pin 6 Amps socket outlet controlled by one switch on Same board, complete all as specified and as directed.

Description Same all as per srl item No 140.00 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

Description Same all as per srl item No 140.00 here-in-before but for one socket outlet 16 Amp with 4.00sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

Supply and fix modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed.

Supply & fix modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fix modular socket outlet 3/3 pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing modular fan regulator electronic step type(Socket type), 120 watt, , two module 230 Volts, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified.

Supply and fixing in repairs door Bell electric ,music type, AC, SP , 240V, ISI Marked complete, all as specified.

Supply and fixing Ceiling rose surface bakelite 65x50mm three terminals including provn of PVC blocks, complete all as specified and as directed.

Supply and fixing 25 A DBOXx SRCD is ready plug and play all-in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuits faults. It is designed such that user can easily upgrade his installation by replacing existing sockets boxes and get built-in protection omplete all as specified and as directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

Supply and fixing in repairs wall mounted decorative fancy light fitting made of polycarbonate suitable for 9watt retofit LED lamp B-22 base complete all as specified and as directed.

Supply and fixing self ballasted LED Retrofit Bulbs 12 Watt with PBT body shell and PC diffuser. 210 degree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl taking out unserviceable CFL/LED Bulb complete all as specified and as directed.

Supply and fixing in repairs 20 watt wall mounted LED batten with basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver and connecting up with three core flexible copper conductor cable 24/0.20 sqmm complete all as specified and as directed.

Supply and fixing in repairs 10 watt wall mounted LED batten with basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver and connecting up with three core flexible copper conductor cable 24/0.20 sqmm complete all as specified and as directed.

Supply and fixing LED surface mounted bulk head luminaries 8-10 watt, IP 65, PVC housing, surge protection including driver & LED lamp etc complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed .

Supply and fixing in repairs 15 watt LED light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LES as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories internally pre-wired and suitable size bracket including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed .

Supply and fixing sheet metal MCB DB, SPN, 8 way with 200 Amps rated bus bar single pole and neutral with double door conforms to IS:8623.III , IP:43 protection, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed.

Supply and fixing in repair, MCB, Single Pole, AC supply, 240 volts, 06 to 32 Amps, 'B' series,10 kA rupturing capacity and making connections complete all as specified and as directed.

Supply and fixing in repairs MCB single pole and neutral 240 volts, 40 Amps,10KA, 50 Hz, B Series complete all as specified and as directed.

Material and labour in repair for sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium grade ISI marked of adequate size for housing the wires including taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and directed Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Taking down exhaust fan and painting of exhaust fan complete at site with one coat of synthetic enamel paint by spraying after cleaning all dust etc incl connecting up and provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire including repalcement of capacitor , bearing/bush , rubber bushes minor nuts bolts screws washers greassing in fan bearing and refixing same complete all as specified and directed

Rewinding of 300mm sweep Exhaust fan with appropriate size of copper enamelled wire including varnishing , heating with proper insulation complete and testing all as specified and directed

Taking down ceiling fan and replacement of fan controller as per existing model and make and cleaning all dust etc incl connecting up and provn of twin core cable of suitale size for ceiling rose to connector connecting of earth wire incl bearing/bush , minor nuts bolts screw washers and refixing same complete all as specified and directed

Taking down geyser from site and cleaning , painting and minor repairs ( i.e. Replacment of indicator lamp , non return valve ( brass), element and thermostat ) including provn of twin core cable of suitabe size 3 core from geyser to powerpoint with plug top 15A and refiixng the same at site complete all as specified and directed

Materail and labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed.

Amount of credit of Rs. 161967.25 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Please Enable Macros to View BoQ information