ADDITION / ALTERATION AND SPECIAL REPAIRS TO MD ACCN OF OFFRS, JCOs AND OR INCLUDING PROVN OF PROTECTIVE WORK AND ALLIED WORKS AT NEW MIL STN GANGTOK UNDER GE GANGTOK

Amount

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

All as item No 1 here-in before but not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down eaves gutter and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan, necks etc,including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Demolition of concrete in ground floor and pavings not exceeding 15 cm thick (un-reinforced) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils, rails etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (un-reinforced) complete all as specified and as directed.

Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital, Sikkim or similar pattern roof/facia etc complete all as specified and as directed.

Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM(1:6) complete all as specified and as directed.

All as per item No. 14 here-in-before but over and including 10 mm thick backing coat in CM (1:3) as in skirting 10 cm height complete all as specified and as directed.

Up rooting of plant/ bushes from walls of bldgs up to extranded root and spraying of Muriatic Acid required quantity complete from any location of bldg up to ten stories and making good distributed surface with cement mortor (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate upto 10th floor complete all as specified and as directed. (NOTE : Necessary scaffolding shall deemed to be included in this item.)

M&L for Surface Preparation & Removal of the loosely bouned concrete of the spalled RCC slab/beam/column/wall and exposing the corroded rebar completely (up to 20mm behind) upto the level of the sound concrete complete all as specified and as directed. (Note : (i) Mechanical tools if required for chiselling shall deemed to be included in the quoted cost. (ii) Decision of GE for finding depth of sound concrete shall be final and binding. No extra amount shall be paid in this regard.)

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

All as item No. 19 here-in before but on vertical surfaces but on 10mm thick rendering in CM (1:3) (Size =600x100mm) complete all as specified and as directed.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for glazed coloured ceramic tiles (300x200x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over and including 15mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.

M&L for 75mm thick PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) in plinth protection path/hardstanding finished cement concrete surfaces fair and even complete all as specified and as directed.

M&L for pre cast cement concrete block masonry with solid blocks, exceeding 10 cm in width and settting in CM (1:6) type C1 (1:3:6) (20 mm graded stone aggregate) complete all as specified and as directed.

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and as directed.

M&L for reinforced cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete, flat complete all as specified and as directed.

M & L for TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings / ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending and binding with MS wire, not less than 0.9 mm dia or securing with clip complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any (Trapozoidal pattern) colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws/J hooks complete all as specified and as directed.

S&F 3mm thick sheet glass panes ordinary quality not exceeding 0.5 Sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed.

All as per item No. 32 here-in-before but 4mm thick figured glass pin headed type not exceeding 0.5 Sqm each fixed to steel frame complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks complete all as specified and as directed.

S&F of Anodised aliminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285; complete all as specified and as directed.

S&F of 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:6) finished even & fair complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar (1:4) in two layers of 10mm each using WPC as per manufacturers instructions in finishing layer on brick or concrete surfaces finished even & fair complete all as specified and as directed. (NOTE : WPC shall be measured and paid separately.)

M&L for 5mm thick rendering in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, number of coats and any width or girth etc and applying two coats of oil bound distemper on old wall surface complete all as specified and as directed.

M&L for two coats of Oil bound distember on new wall surface over a coat of primer including preperation of the surface complete all as specified and as directed.

M&L for applying 1.5mm thick wall care putty on new or old wall surface complete all as specified and as directed.

M&L for applying two coats of white washing including preparation of old decorated surface on walls complete all as specified and as directed.

M&L applying three coats of white wash including preparation of new wall surfaces complete all as specified and as directed.

M&L for applying three coats of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and as directed.

M&L for applying one coat of white washing including preparation of old decorated surface of ceiling complete all as specified and as directed.

M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surfaces in CM (1:3) as in screed bed for laying wall finishes complete all as specified and as directed.

S&F of tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified and as directed.

M & L for cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting not exceeding 10cm girth as in stone or concrete block walls complete all as

S&F in repair stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and as directed

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and as directed.

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old wood or wood based surface of area exceeding 10 cm width and girth complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old steel surface over 10cm width or girth, not otherwise described complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified and as directed.

S&F in repairs 100 mm dia CI (sand cast) soil waste and vent pipe (Sand cast) any length with or without ears with cement joints , laid in trenches or in floor including necessary earth work complete all as specified and as directed.

All as per item No. 59 but fixed to wall complete all as specified and as directed.

S&F of 100 mm dia CI bend (sand cast) ( any radius ) diminishing pieces or tapers ( larger bore measured ) complete all as specified and as directed.

S&F of 100 mm dia CI branch pieces (sand cast) single (equal or un equal) ordinary or inverted spigot or socket type or with parallel as in repair with oval access door complete all as specified and as directed.

S&F of PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as specified and as directed.

S&F of PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc (Bore of pipe 110mm) complete all as specified and as directed.

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (diameter of outlet 100mm) complete all as specified and as directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

M&L for form work to chajjas and similar items including edges, rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) for chajjas complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old wood or wood based surface not exceeding 10 cm width or girth complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for re-fixing or removing from site and S&F of 50mm bore GI pipe with all fittings fixed complete to wall, ceiling or laid in floor complete all as specified and as directed.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and including concrete complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging device etc complete fixed in repairs complete all as specified and as directed.

S&F of CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets (Make: Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length complete all as specified and as directed.

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/ unserviceable steel windows complete all as specified and as directed.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and as directed .

S&F of 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and as directed.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed.

S&F of 150mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F of 75mm size stainless steel butt hinges with mild steel hinge pin complete all as specified and as directed.

S&F of factory made soild FRP (fibre reinforced polymer) doors frame of size 50mmx47mm (specifications as per approved manufacturer) complete all as specified & as directed.

S&F 30mm thick (style thickness) factory made solid panel FRP door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame, (fixing of doors shall be as per manufacturers instructions) etc complete all as specified and as directed.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float, handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC complete all as specified and as directed. MAKE : Sleek of Hindware, Slimline of Parryware or equivalent of Cera.

S&F in repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc complete all as specified and as directed.

S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and as directed.

S&F angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and as directed.

M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide primer complete all as specified and as directed.

Taking up or down steel water tubings and fittings etc complete for Bore tubing 15 mm and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

Taking up or down steel water tubings and fittings etc complete for Bore tubing 20 mm and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

M&L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for Bore tubing 15 mm complete all as specified and as directed.

M&L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for Bore tubing 20 mm complete all as specified and as directed.

Fixing only tubes, any grade, to walls and ceilings or laying in floors etc for Bore tubing 15 mm and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

S&F of sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc complete (overall size 915mmx460mm with bowl size 410mmx330mmx160mm) complete all as specified and as directed. MAKE : Nirali, Suprime or equivalent as approved by GE.

Taking down shutters and refixing in same opening of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F of second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section-8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existing opening and making to match as per existing surfaces complete all as specified and as directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed.

M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No. 103 here-in-before but in narrow width of vertical surfaces complete all as specified and as directed.

S&F in repairs of 12mm thick block boards grade -2 quality interior grade,commercial type including teak wood lipping 6mm thick all round fixed with nails to timber frame work complete all as specified and as directed.

All as per Item No. 105 here-in-before but fixing only in repairs including provn of new teak wood beading etc complete all as specified and as directed.

S&F in repair of pillars taps, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs of 2nd class hardwood small fittings such as brackets of any type hinge blocks,shaped door window stops and the like including all necessary labours articles not exceeding 200 Cum each complete all as specified and as directed.

All as per Item No. 108 here-in-above but fixing only in repairs ditto small fittings etc complete all as specified and as directed.

S&F in repairs of 18 / 19mm thick block board grade 2 quality with decorative face veeners on one face fixed with screws to timber frame work including teak wood lipping 6 mm thick all round fixed with nails to timber frame work complete all as specified and directed.

S&F of framed work such as grills, guard bars etc with ends of bars shouldered and/or riveted, conforming to Fe - 290.Gde - E - 165 complete all as specified and as directed.

S&F stainless steel fancy type curtain rods 20-25 mm dia, stops and complete fitments complete all as specified and as directed.

S&F stainless steel wall brackets and end brackets for curtain rods complete all as specified and as directed.

S&F of 75 mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in CM (1:1) with spun yarn fixed to wall complete all as specified and as directed.

S&F of 75 mm bore cast iron bend (any Radius) dismantling piece or tapers (Large bore measured) complete all as specifed and as directed.

S&F of CI Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket ype) or with parallel branches complete all as specified and as directed.

S&F of in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or galvanised wire staples or wooden beadings for doors complete all as specified and as directed.

S&F in repairs Cast iron or malleable cast iron handles 75mm long, for steel window / vantilator left or right opening cast type, stove enamelled black complete all as specified and as directed.

S&F of 50mm bore PVC ( SWR ) High density polythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F stainless steel plate rack of 1 mm thick and size 750 mm x 600 mm x 250 mm, three tier complete all as specified & as directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick wall complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks, and similar works etc including necessary form work as required complete all as specified and as directed.

S&F of Continuous (piano) hinges Width of flaps 30 mm , mild steel, bright finish or electrogalvanised complete all as specified and as directed.

M&L for mild steel rolled sections conforming to Fe - 290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F in repair Block boards 25 mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, fixed with screws to timber frame work including 6mm thick lipping of first class hardwood complete all as specified

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5m depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

All as per item No 126 here-in-before but beyond 1.5m or part thereof in depth beyond the first 1.50m complete all as specified and as directed.

Removing excavated materials to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning filling in including spreading levelling watering well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation etc.complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar etc including all quoins, arches, pillars with separating serviceable stones complete all as specified and as directed.

M&L for rendering 20mm thick on stone masonry surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and as directed.

M&L for providing cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified and as directed.

M&L for sunken floor treatment by roughning of sides and bottom of sunken floor by picking, sweeping clean and washing down with water to remove dust etc and 10 mm thick rendering in CM (1:4) on concrete surface(bottom sides of sunken floor) finished fair and even mixed with liquid water proofing compound conplast x 421IC mfd by M/S FOSROC chemicals india pvt ltd, poriming coat of Nitro proof 100 and after drying of primer applied one coat of Nitro proof 120 mfd by M/S FOSROC chemicals india pvt ltd complete all as specified and as directed.

S&F of 50 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

Cutting holes in brick wall/concrete block built in cement mortar or in cement lime mortar for inserting holdfast and making good dismantled portion in cement mortar (1:3)

S&F Granite (of any type and colour ) work, thickness of granite 20 mm (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete all as specified and as directed.

All as per item No. 137 here-in-before but as in skirting (12 to 15 mm thick) complete all as specified and as directed.

M&L for applying two coats of anti-algie paint to roof facias, RCC Chajjas, etc including complete removal of existing treatment on surfaces of old concrete surfaces etc complete all as specified and as directed.

S&F of 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F of Hasp and staple, aluminium anodised,100mm long including bolt to hinge plate and fixed with screws complete all as specified and as directed.

All as per Item No. 141 here-in-before but fixed in repairs complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of 75 mm size fixed complete all as specified and as directed.

All as per Item No. 143 here-in-before but fixed in repairs complete all as specified and as directed.

S&F of brass chromium plated Magic eye fixed to entrance doors of standard quality and size complete all as specified and as directed.

S&F of floor door stopper of aluminium alloy anodised,with rubber at bottom of required size fixed in door with screws etc complete all as specified and as directed.

S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F of toilet paper holder of stainless steel of required size and shape fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc complete all as specified and as directed.

M&L flush pointing to random rubble masonry, in CM (1:4),uncoursed or brought upto courses etc complete all as specified and as directed.

M&L in repairs Gun-metal, globe or gate valves,15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum getting out and removing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil complete all as specified and as directed.

Demolition of stone or boulders masonry built in cement mortar including all quoins,arches,pillars, with separating seviceable stones & setting aside for reuse in the work all as complete as specified and as directed.

M&L for mild steel tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including one shop coat of zinc chromate primer paint ( including preparation of surface) at contractor's workshop before fabrication complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description n.exc.10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for walling of random rubble walling, brought upto courses, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and as directed.

All as per item No. 158 here-in-before but except stone complete all as specified and as directed. (NOTE : Old serviceable stone shall be obtained from Srl item No. 154 of this schedule 'A' part here-in-before.)

M&L for 100mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in path/steps laid with and including use and waste of form work & finishing the surface even & rough to receive the topping layer complete all as specified and directed.

M&L for hard core of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

M&L for 15mm thick screed bed in CM (1:4) for laying floor/roof finishes etc. complete all as specified and as directed.

M&L for rendering 10mm thick on brick or concreteor stone surfaces in CM (1:3) as in screed bed for laying wall finishes complete all as specified and as directed.

M&L for pre polished coloured chequered cement concrete tiles made with grey cement and pigments of size 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / foot path complete all as specified and as directed.

All as per item No. 164 here-in-before but as in skirting/dado complete all as specified and as directed.

M&L for rendering 20mm thick on stone masonry surfaces in CM (1:4) finished even & fair complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft /loose soil etc complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

M&L for precast RCC (1:1.5:3) type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed

M & L reinforced concrete pipes, class NP2, drain pipes of radius 150mm laid in trenches and jointed complete all as specified and as directed.

S&F for PVC (SWR) 200mm bore pipes with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as specified and as directed.

S&F for PVC (SWR) 200 mm bore bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified and as directed. (Bore of bend 200mm)

M&L PCC (1:3:6) type C-2 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L PCC (1:3:6) Type C-1 (20mm graded aggregate) as in coping/benching for man holes complete all as specified and as directed.

M&L for 15 mm thick plastering in cement mortar (1:3) on fair faces of brick or concrete surface finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 20mm thick plastering in cement mortar (1:4) on other than fair faces of brick or concrete surface finished even and smooth with using extra cement complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150mm complete all as specified and as directed.

M&L cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished & reforming benching as required dia of pipe 150mm complete all as specified and as directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F pre -pvc coated chain link fencing size of mesh 50 x 50mm made out of 4mm dia GI wire to any type of standard rails, straining bolts etc complete all as specified and as directed.

S & F 10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified and as directed.

S & F mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete all as specified and as directed.

Excavation over areas in soft/loose soil not exceeding 1.5M depth for foundation etc & getting out complete all as specified and as directed.

M&L for walling with pre-cast cement concrete block masonry with solid block exc 10cm width with cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) setting in cement mortar (1:6) complete all as specified and as directed.

S&F PVC(SWR) Pipes single socketed in any length with rubber rings 75 mm dia complete all as specified and as directed.

M&L for hand packing (any thickness) at back of walls over arches etc & raising or lowering to required level with broken stone or boulders complete all as specified and as directed.

S&F of geosynthetic material in 75mm dia weep hole cover complete all as specified and as directed.

Removing excavated material (soil) exceeding 1.5 km but not exceeding 15 km & depositing where directed.

M & L for precast cement concrete (1:3:6), type C1 (using 20 mm graded stone aggregate) as in bond stones for stone walling and set in cement mortar (1:6) with plain fair faces, incl chamfers, weathering throating etc & getting in cement mortar complete all as specified and as directed.

M & L for RCC M-25 (design Mix) using 20 mm graded stone aggregate as in RCC Band complete all as specified and as directed.

M&L for formwork to the faces of wall, retaining wall for rough finished surface complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unserviceable sub main wiring of any size two single core including earth wire and PVC conduit/ casing capping and removing materials on site and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

M&L for point wiring for one light point controlled by one way switch 5/6 amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost complete all as specified and directed.

All as per item No 198 here-in-before but for one Exhaust Fan point controlled by one switch.

All as per item No 198 here-in-before but one 3 pin socket oulet 5 amps, on same board.

All as per item No 198 here-in-before but one 3 pin socket oulet 5 amps, on independent board.

All as per item No 198 here-in-before but for one Bell/Buzzer point controlled by one bell switch.

All as per item No 198 here-in-before for one light point controlled by two 2-way switches

All as per item No 198 here-in-before but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FR-LS PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FR-LS PVC insulated unsheathed copper conductor as earth wire, complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amp (ISI marked) complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp (ISI marked) complete all as specified and directed.

S&F switch piano flush type, 05/06 Amps single pole, two way 240 volts complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin 5 amps flush type complete all as specified and directed.

S&F switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, shuttered type, 230 volt flush type, complete all as specified and directed.

S&F ceiling rose, PVC/ polycarbonate, isolated body (ISI marked), three terminals, complete all as specified and directed.

S&F call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&Fswitch piano bell push (ISI marked) 5/6 amps flush type white/ivory finish complete all as specified and directed.

S&F lamp holder, insulated PVC/ Polycarbonate body, with back plate suitable for batten/angle fittings including LED bulb 7 watts B22 cap 230 volts complete all as specified and directed.

S&F LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and directed.

S&F LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting c complete all as specified and directed.

S & F Decorative wall light fixture made up of Polycarbonate suitable for 9/10 Watt (or nearest next higher wattage) LED light having B-22 base lamp holder with and including 10 watt LED lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and directed.

S & F Decorative wall light fixture made up of Polycarbonate suitable for 9/10 Watt (or nearest next higher wattage) LED light having B-22 base lamp holderwith and including 10 watt LED lamp and connecting up with and including PVC insulated twin twisted flexible copper conductor of suitable size from ceiling rise to terminal block of light fitting complete all as specified and directed.

S&F high efficiency LED ceiling light surface type, with high brightness 12 watts, 230 volts with control gear and all accessories in one fixture and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S&F energy saving and environmental friendly long life LED 20 watt building security light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening with driver compartment, IP66 protection with other accessories and necessary electric connection complete all as specified and directed.

S&F heavy duty Exhaust fan 300 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and directed.

S&F Exhaust fan with louvers 250 mm sweep (Plastic rust proof Body and blade), 1280 RPM, AC single phase 240 volts, 50Hz, Power Input- 45 watts, Air Delivery – 860 CMH and connecting up complete including built in louvers and provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan complete all as specified and directed.

M&L for concealed sub-main wiring alongwith earth wire of size of 2 x 10.0 Sq. mm + 1 x 10.0 Sq. mm earth wire, ISI marked, FR-LS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : Two runs of 10 Sqmm conductor for main and one run of 10 Sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

M&L for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 Sq. mm + 1 x 6.0 Sq. mm earth wire, ISI marked, FR-LS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

M&L for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 Sq. mm + 1 x 4.0 Sq. mm earth wire, ISI marked, FR-LS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : Two runs of 4 Sqmm conductor for main and one run of 4 Sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

M&L for concealed sub-main wiring alongwith earth wire of size of 2 x 2.5 Sq. mm + 1 x 2.5 Sq. mm earth wire, ISI marked, FR-LS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : Two runs of 2.5 Sqmm conductor for main and one run of 2.5 Sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles.

S&F MCB DB, TPN, 415 Volts, 6 ways (8 + 18 WAYS), DOUBLE DOOR, IP-43, suitable for MCB TPN / RCBO ad Incomer (Paid seperately) and MCB SP as out going, metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall / other surface complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 12 Way, single pole and neutral, with 100 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 Way, single pole and neutral, with 100 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB DB in sheet metal enclosure, double door, SPN 4-Way complete all as specified and directed.

S&F MCB, DB, TPN, 4 ways (8+12 WAYS), DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and directed.

S&F MCCB, FP, 16KA, 415V, thermal magnetic protection, adjustable type having breaking capacity 16 KA of rating 100 Amps, ISI marked complete including connection complete all as specified and directed.

S&F MCB, TPN, 10KA, 415 V, "C" curve, 63 A, ISI marked, complete all as specified and directed.

S & F MCB, SPN, 10KA, 240V, "C" curve, 40 A, ISI marked, complete all as specified and directed.

S & F MCB, SPN, 10KA, 240V, "C" curve, 6 - 32 A, ISI marked, complete all as specified and directed.

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked, complete all as specified and as directed.

S&F RCBO for earth leakage, overload & short circuit protection, double Pole, 240 Volts 50 Hz, 10 kA short circuit capacity with sensitivity of 30 mA, as per IS-12640-2 of rating 40 A complete all as specified and directed.

S&F RCBO for earth leakage, overload & short circuit protection, double Pole, 240 Volts 50 Hz, 10 kA short circuit capacity with sensitivity of 30 mA, as per IS-12640-2 of rating 32 A complete all as specified and directed.

M&L for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI wire protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 2009 and testing on completion complete including dismantling the existing unserviceable earthing complete all as specified and directed.

Taking down existing Geyser 25 Ltrs capacity and keeping in safe custody complete all as specified and directed.

S & F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB "C" curve of 20 A rating complete all as specified and directed.

S&F AC Single Phase KWH meter Backlit LCD display , accuracy class 1.0, 240 V 50 Hz with optical port of rating 10 – 60 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power) complete with transparent hinged type box suitable for incorporating the meter all as per OEM including necessary fixing, mounting arrangements with electric connection complete all as specified and as directed incl taking down old unsv ones complete & depositing to MES Storeyard complete all as specified and directed.

S&F AC Single Phase KWH meter Backlit LCD display , accuracy class 1.0, 240 V 50 Hz with optical port of rating 5-30 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power) complete with transparent hinged type box suitable for incorporating the meter all as per OEM including necessary fixing, mounting arrangements with electric connection complete all as specified and as directed including taking down old unservicable ones complete & depositing to MES Storeyard complete all as specified and directed.

Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified.

Refixing of Geyser 25 Ltrs capacity in new or old position complete after repair works including replacing hot & cold PVC connection pipees (01 No each) etc complete all as specified and directed.

S&F distrubution borad vertical type TPN incluidng one MCCB 4 Pole 80 Amps 16 KA as incomer, double door IP 43 protection, 8 way, with copper bus bars, Neutral Links, Earth link, Earthing studs, Blanking Plates, fixed flush to wall / other surface c complete all as specified and directed. (NOTE : Outgoing MCBs shall be measured and paid seperately under relevant item.)

Taking down old existing water tank 500 Ltrs capacity any type complete all as specified and directed.

Supply, fixing and hoisting in position Rotional moulded polythene water storage tank 500 Ltrs capacity multilayer constraction (cylindrical vertical with closed top) hoisted and fixed in position including ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25mm bore of having weight not less than 455 gms complete all as specified and directed.

Disconnecting existing water tanks 500 Ltrs capacity and refixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Taking out old GI tubing 20mm dia including all fittings including short length complete all as specified and directed.

Taking out old GI tubing 25mm dia including all fittings including short length complete all as specified and directed.

Supply and laying steel water tubing of size 20mm bore, medium grade, galvanised with all fittings such as elbow, union, reducer, tees, bends etc and short length fixed on wall/floor/ceiling complete all as specified and directed .

Supply and laying steel water tubing of size 25mm bore, medium grade, galvanised with all fittings such as elbow, union, reducer, tees, bends etc and short length fixed on wall/floor/ceiling complete all as specified and as directed .

Refixing old unserviceable steel tubing of size 20 mm bore including new running fittings in new or old position complete all as specified and directed.

Refixing old unserviceable steel tubing of size 25 mm bore including new running fittings in new or old position complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball,screwed for iron pipe of 20 mm bore having weight not less than 210 gms complete all as specified and directed.

S&F in repair gun metal gate valve of size 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed including taking down old unserviceable valve complete all as specified and directed.

S&F in repair gun metal gate valve of size 25 mm bore with iron wheel head screwed both ends for iron pipe and fixed including taking down old unserviceabole valve complete all as specified and directed

M/S R. K. INDUSTRIES

M/s KACHO BHUTIA

M/s NLM INFRA PROJECTS

M/S Sohanlal Agarwala

STAR CONSTRUCTION

NIRMAL SALES CORPORATION

HARBHAJDAS AGARWAL