PROVISION OF FIRE TRENCH AT SHORT AND LONG RANGE, CHANGING ROOM, ADDITIONAL SOCKET INCLUDING SERVICE CONNECTION TO COMPUTER LAB, SECURITY LIGHT, DEEP FREEZER AND IMPROVEMENT OF SEWAGE LINE AT TRAINER LIVING LINE UNDER GE (CENTRAL) BAGALORE

Amount

SCHEDULE 'A' PART I Excavation over areas for foundation not exceeding 1.5 M deep and exceeding 10 sqm on plan and getting out in hard /dense soil .

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

All as per item No 2 above but depth exc 1.5 metre and not exc 3.0 metre

Returning, filling in hard/dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated surplus material to a distance exc 250m but n exc 500m and depositing where directed at a level not exc 1.5 above the starting point complete all as directed.

M&L for providing plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete.

M&L for Pre-cast cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as directed.

M&L for 40mm thick Cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) mixed with integral water proofing compound by weight of cement as per manufacturer's instructions, as in damp proof course to horizontal or vertical surfaces including necessary formwork complete. (Note : WPC shall be measured and paid separately against respective item as supply only).

Filling under floors, using surplus soil found during excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.

M&L for hard core using broken/crushed stone aggregate of guage not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surfaces all as directed.

M&L for PCC 1:3:6, type C1, using 20 mm graded granite stone aggregate as in coping including formwork complete all as directed.

M&L for PCC 1:2:4, type B1, using 20 mm graded granite stone aggregate as in surface chennel and drains complete all as directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 mix, type D2 using (40 mm graded stone aggregate), as in sub base of flooring.

M & L for 40mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring etc and finished the surface using extra cement even and smooth complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in paving, hardstanding etc and finished the surface even and plain without using extra cement.

S & F well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F Mild steel work as in band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S&F for 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S & F 30 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (b).

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel

S & F 200 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F for Aluminium Hat pegs, solid body,125mm to 175 mm fixed with wooden fillet on walls complete.

M&L for 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane

M&L for false ceiling horizontal level Armstrong or equivelent providing and fixing in true horizontal level 600mm X 600mm false ceiling system manufactured by M/S Armstrong world industries using hot dipped galvanised steel section exposed surface with pre coated main tee of size 24 x 32 mm having 0.27 mm thick at every 1200 mm centre, to centre maximum and rotary stiched cross tee of size 24 x 27 mm having 0.27 mm thick at every 600 mm c/c & sub cross tee of size 24 x 27 mm having 0.25 mm thick at 1200 mm c/c & wall angle of size of 20 x 20 mm having 0.35 mm thick fixed to the periphery of the wall, the above grid is suspended from wood/ steel/RCC slab surfaces by necessary holding arrangements at every 1200 mm c/c in both directions using 2.0 mm thick pre straightened GI wire laying edge ceiling tiles manufactured by M/S Armstrong world industries of size 600 mm x 600 mm x 9 mm thick, finished the suefaces by and including applying 2 coats of white synthtic enamel paint with fine fissured back of the tile duly sanded & finished with a coat of protective paint complete all as manufacturers instruction.

M & L for TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for TMT steel bars 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, door, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Rolled mild steel work as in truss, purlins, posts etc using angle, or tee sections, fixed independently, without connecting plates, etc including cutting, welding, drilling holes etc complete. Steel section conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa and finished with resin coat on both surfaces @ 150 gm/ sqm, as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two layer (10mm and 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item supply only).

"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. Make : Dr. FIXIT

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash after preparation of new plaster surface of wall complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of alkali resistant priming coat on walls including preparation of new plastered surfaces.

M&L for two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer after preparation of new steel surface of any description, not otherwise described, over 10 cm width or grith complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer after preparation of wooden surface of any description, not otherwise described, over 10 cm width or grith complete all as specified and directed.

Demolition of Brick Work /Solid concrete Block Masonry or Stone bolder masonry built in CM including Copping etc.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Eng-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting reinforcement to facilitate demolition of concrete, complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including benching / PCC of 100mm dia pipes complete and removing the debris all as specified and directed.

Demolition and breaking up drain pipes of 150mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including benching / PCC of 150mm dia pipes complete and removing the debris all as specified and directed.

Demolition and breaking up drain pipes of 200mm bore (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including benching / PCC of 200mm dia pipes complete and removing the debris all as specified and directed.

Supply and fix 110mm bore PVC (SWR) Pipes Type "B" conforming to IS 13592, single socketed in any length with rubber ring joints, laid in trenches complete all as specified and directed.

Reinforced concrete pipes of 150mm bore, class NP2, laid and jointed complete with collar

Reinforced concrete pipes of 200mm bore, class NP2, laid and jointed complete with collar

Reinforced concrete pipes of 300mm bore, class NP2, laid and jointed complete with collar

M&L cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100mm bore pipe

M&L cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe

M&L cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) bed concrete to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore pipe

Cutting into existing manholes for removing existing branch drain pipe of 100mm internal dai of pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required

All as per item No 56 here-in-before but 150 internal dia of pipes

All as per item No 56 here-in-before but 200 internal dia of pipes

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching including necessary form work all as directed and specified

Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement concrete using extra cement including forms, mould, mitred/stopped etc complete all as specified and as directed. (Inner girth only be measured)

M&L for Precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc), lintels, window cills and similar articles with plain faces and set in cement mortar 1:6 including necessary formwork complete all as specified and directed. (Note: Reinforcement steel shall be measured and paid separately under respective item)

S&F cast iron work grade FG 150, unmachined, in brackets, gully traps gratings,railing,frames, manhole covers, fire and soot doors, dampers, stop value boxes, gate stops, part of ranges, balusters and similar articles exc 5 kg etc.all as specified and directed.

S&F PVC ( SWR ) Gully Trap 125/110mm,Setting and jointing with solvent cement all as specified and directed.

Taking out deposited sludge from manholes upto 1.5mtr depth from GL (height of lift) by means of mechanical compressor sewage cleaning machine and cleaning the entire internal sewage with water and disposed outside MD land and depositing where desired. Note:- (i) The machanical sewage cleaning compressore machine shall be arranged by the contractor from is own cost and arrangement. (ii) The sewage cleaning machine shall be arranged by the contractor as and when informed by Engr-in- charge for desludging the septic tank. (iii) The quantities will not be given in full for cleaning. The same may be in part or full for cleaning. The same may be in part of full as available. As such contractor will not have any claim for cleaning the Septic Tank in part.(iv) Quoted rate deemed to be inclusive for arranging cleaning machine any number of times.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of Stone slabs and concrete tiles of any description or thickness laid dry in floors, aprons etc.

M&L for Cement concrete type C- 2,1:3:6 (using 40mm graded stone aggregate),75mm thick as in sub base of floors.

M&L for factory made machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 65 mm thickness M-35 Grade concrete with using grey cement and no pigment including 65mm thick sand filling complete all as directed.

M & L Cement Concrete Coloured Chequered designer tiles 30 cm x 30 cm x22 to 25 mm thick as in floors including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.by Engineer-in-Charge.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 200mm x 300mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortar 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete all as specified and directed.

S & F in repair 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, 600mm long PVC connection pipe 15mm dia with PTMT nuts, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repair 15 mm bore, stop valve with capstan head, PTMT, any colour, high pressure screwed for iron pipes and fixed complete all as specified and directed.(min weight 90 gms)

S & F in repair 15 mm bore, bib taps with capstan head, PTMT, any colour, high pressure screwed for iron pipes and fixed complete all as specified and directed.(min weight 90 gms)

SCHEDULE 'A' PART II M&L for Point wiring on surface of wall/false ceilingwith PVC insulated and unsheathed cable single core multistranded copper conductor FRLS of 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic grey conduit conforming to IS-9537 with all accessories ,including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with steel screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- a) One light point controlled by one single pole switch 5 Amps

b) One Ceiling fan/Wall fan /exhaust fan point controlled by one switch

c) One 5 Amps switch socket combination on independent board

d) One 5 Amps switch socket combination on same board with other switches.

Supply anf fix piano type switch 1-way 6 Amps, AC, 230 volts, single pole.

Supply and fix switch socket combination, universal type, 5 Amps 240 volts AC ISI marked 2-in-1 flush type 5 pin suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top all as specified.

Supply and fix stepped socket type (5 step) electronic fan regulator flush type,upto 120 Watts 230 V. AC.

S & F ceiling rose surface bakelite three terminal of size 65X50mm,240 Volts AC PVC Polycorbonate isolated body complete

Supply and fix LED tube light fitting, 1x20 watts 230 volt, with extruded aluminium housing powder coated with diffuser for glare free light complete pre-wired fixed on walls with all fixing accessories such as 2 nos of PVC square/round blocks, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. Make : Philips /Havells /Bajaj /.Cromption

Supply & Fixing 5 star rated energy saving ceiling fan 1200mm sweep (white) with all accessories and hanging the ceiling fan from fan hook with 3 core flexible copper wire 24/0.20 sqmm from ceiling rose, etc all as directed. Make : Model ES-50 of Havells or equivalent in Usha/Orient / CG

M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and providing (new) non metalic PVC rigid conduits (Medium grade) of suitable size including all accessories, fixed to wall/ceiling etc including 6 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point and to existing main switch/ distribution board of each building/ quarter complete all as specified and as directed by Engineer-in-charge. (Note : (a) PVC Conduits, two run cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.)

M & L Sub main wiring with two runs of 4 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and providing (new) non metalic PVC rigid conduits (Medium grade) of suitable size including all accessories, fixed to wall/ceiling etc including 4 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to to common earth point and to existing main switch/ distribution board of each building/ quarter complete all as specified and as directed by Engineer-in-charge.(Note : (a) PVC Conduits, two run cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.)

S & F Switch socket combination, 2 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed.

S & F metal plug & socket DB in sheet metal enclosure including 20 Amps, DP, MCB, 'C' series type, 10 KA breaking capacity complete all as specified and directed. (Make : LEGRAND/ABB/SIEMENS as approved)

S & F Factory made board distribution (DB) in sheet steel enclosure with common bus bar at incomming end, SPN, 2 way, 240 Volts , 200 amps suitable for housing MCBs, fixed flush in wall surface complete all as specified and directed. Make: LEGRAND/ABB/SIEMENS as approved)

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way (4+12), 240 Volts , 200 amps suitable for housing MCBs, fixed flush in wall surface complete all as specified and directed. Make: LEGRAND/ABB/SIEMENS as approved)

S & F factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, TPN, 12 way (8+36), 415 Volts, horizantal type, IP-43, IK-09, suitable for fixing MCBs, fixed flush in wall surface complete all as specified and directed. (Make : LEGRAND/ABB/SIEMENS as approved)

S & F MCB, SP, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and directed. (Make: LEGRAND/ABB/SIEMENS as approved)

S & F MCB, 'C' Series, SPN, 240 Volts, 40- 63 Amps, 'C' Series, 10KA capacity complete all as specified and directed. (Make: LEGRAND/ABB/SIEMENS as approved)

S & F MCB, 'C' Series, TPN(Four pole), 415 Volts, 40 Amps, 'C' Series, 10KA capacity complete all as specified and directed. (Make: LEGRAND/ABB/SIEMENS as approved)

S & F MCB, 'C' Series, TPN(Four pole), 415 Volts, 60 Amps, 'C' Series, 10KA capacity complete all as specified and directed. (Make: LEGRAND/ABB/SIEMENS as approved)

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage of 1100 Volts, PVC insulated, armoured, 3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 120 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. (Note : Excavation and Earth work shall be measured and paid separately under respective item)

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage of 1100 Volts, PVC insulated, armoured, 3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 95 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. (Note : Excavation and Earth work shall be measured and paid separately under respective item)

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage 1100 volts, PVC insulated armoured, 2 core, nominal cross sectional area of main conductor 25 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. (Note : Excavation and Earth work shall be measured and paid separately under respective item)

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage 1100 volts, PVC insulated armoured, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. (Note : Excavation and Earth work shall be measured and paid separately under respective item)

M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M&L for boring / drilling by trenchless technology using pneumatic machines horizontally under the road in hard soil without cutting/disturbing the existing PCC hardstanding/road at a depth upto 1.50 metre and making good to disturbed surfaces of road/hard standing to match with existing specifications all as directed and providing, inserting HDPE pipe of size 80mm dia, pressure rating 10kg/sqcm for drawing the UG cable complete all as specified and as directed. Note : Quoted rate shall deemed to be inclusive of necessary demolition/excavation of road/hard standing and making good including supply and inserting of 80mm dia HDPE pipe).

M & L for 50 mm dia, Galvanised steel tubing, light grade with all fittings for protection of cable laid on road crossing, drain crossing, laid in trenches/floor/road/wall, fixed to pole including MS clamps, nuts and bolts complete all as specified and directed.

M & L for 40 mm dia, Galvanised steel tubing, light grade with all fittings for protection of cable laid on road crossing, drain crossing, laid in trenches/floor/road/wall, fixed to pole including MS clamps, nuts and bolts complete all as specified and directed.

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level using galvanised earth strip 32 x 6mm thick by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe connected toDB/Panel/Equipments, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 300x300x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and common salt in alternative layers,necessary earth work in hard soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete including taking down old one as specified and as directed.

Supply fabrication, installing and testing of factory made LT panel, outdoor type, weather proof having both side openable hinged door shutters with locking arrangement, size of chamber 90cmX60cmX45cm made out of 3mm thick CRCA sheet, powder coated paint inside and outside, welded with 4 Nos angle iron legs using MS angle of size 40X40X5mm, 80cm long duly painted with two coats of black enamelled paint over a coat of red oxide primer and errected in PCC 1:3:6, type C2 as in foundation of suitable depth/size and having following accessories : (a) MCCB, 415 Volts, 25KA, 160 Amps with megnatic thermal load release relay - 01 No (as incoming) (b) Bus bar chamber with copper strip, heat shrinkable insulation shleeve, size 40X 6mm, 04 Nos of required length supported on FRP insulations, internal wiring for indicator with 10 sqmm, single core, copper cable of required length. (c) Indicator lamps with LED bulbs for R, Y, B with copper cable wiring - 01 Set

Supply and fixing MCCB, 250 Amps, 4 pole, 415 Volts with rapturing capacity Icu=36 KA, megnatic thermal release, Ics=100%Icu at 415 Volts, overload setting 70% to 100%, short circuit setting 5 to 10 times to be fixed in existing panel board. Make:LEGRAND/ABB/SIEMENS as approved)

M & L for cutting existing bituminous road to size not exc 45cm wide and not less than 45cm in depth for passing UG cable through GI pipe and making good using PCC 1:3:6, type C2 (40mm graded stone aggregate) complete all as directed by Eng-in-charge.

M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of red oxide zinc chrome primer and writing pole serial number using paint in white colour on black background in circular shape complete all as specified and directed. (Note : Excavation and Earth work shall be measured and paid separately under respective item)

M & F 70 watt new generation energy saving and environmental friendly long life LED street light luminaires with dia cast aluminium housiing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compertment with IP- 66 protection including all accessories, fitting arrangement complete all as specified and directed. Make : Model No ENDURA PEARL PLUSSL 70WLED 757SASYTOPC OF HAVELLS OR equivalent of make Philips/Bajaj/CG as approved by GE

S & F Street light bracket arm of length not less than 1.5 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer in MS clamp complete all as specified and directed.

Supply and fixing steel terminal box out door type fabricated out of MS sheet 2.00mm thick of size 25 x 20x 15 cm, single door hinge type opening and locking arrangement including provision of aluminium bus bar, 2 wire, 240 volts on porcelain base and control with 01 MCB , SP, 10 Amp, 10 KA breaking capacity, fixed to electric pole with MS clamp, bolts, nuts and painting with two coats of synthetic enamelled paint over a coat of red oxide primer internally and externally complete all as specified and directed. Note : MS Flat iron clamp shall be made out of 25X3mm thick whose cost element shall deemed to be inclusive in quoted rate.

Supply and installation of deep freezer with glass top, single door type of capacity 320 litres. Make VOLTAS/BLUE STAR/LG as approved by GE

DHANUSH CONSTRUCTIONS CO.

ARCHANA CONSTRUCTION CO

VARGHESECHACKO AND CO