Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Sankara of Binka Block under National Health Mission in the Sonepur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/35
NBCC/ODISHA/ZO/NHM/NIT/22-23/35
Open Tender-Domestic
Civil Works General
Sonepur, Odisha
₹11,800
₹2.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100
2 1 metre and including dewatering, removing 0 0.00 0.00 0.00
slush, shoring and strutting (as required),
complete as per specification and as
directed by the Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
4 3 & watering with all leads & lifts including cost Cum 515.28 130.86 67,430.57
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous
chemical barrier under and all-round the
column pits, wall trenches, basement
excavation, top perimeter of building,
6 5 expansion joints, over the top surface of Sqm 666.87 162.84 1,08,593.11
consolidated earth on which apron is to be
laid, surroundings of pipes and conduits etc.
complete as per specifications (plinth area of
the building at ground floor only shall be
measured for payment).
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
8 7 foundation and plinth etc. including 0 0.00 0.00 0.00
tempering, curring, shuttering etc.complete
all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Foundation & Plinth
10 9 including splays cutting, circular moulding, Cum 38.81 5664.47 2,19,838.87
corbelling, chamfering and similar such type
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar
of mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
11 10 chamfering and similar such type of works, 0 0.00 0.00 0.00
watering and curing etc. including cost,
conveyance, loading, unloading, royalties
and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as
directed by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than
75 kg./sqcm with dimensional tolerance ±
2% including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
14 13 watering and curing after immersing the 0 0.00 0.00 0.00
bricks in water at least for six hours before
use including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work
complete in all respect as per direction of
Engineer-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 200 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
16 15 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying
the grills and placing in proper position.
19 18 b) Column up to plinth Cum 18.87 13514.54 2,54,973.46
21 20 f) Column above plinth Cum 19.87 13514.54 2,68,494.78
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of including bending,
binding, welding and joining if necessary and
tying the grills and placing in position as
required for R.C.C. Work and for providing
fan hooks as required, hoisting, lowering,
laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18
to 20 gauge and labour required for the work
31 30 for bending, binding and tying the grills in all 0 0.00 0.00 0.00
floors (Linear measurement will be taken and
quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor
steel only. Wastage if any, including weight
of binding wire will not be considered for
measurement) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
34 33 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
37 36 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
43 42 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P
etc. required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
(1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B Ib).
laid on 20 mm thick cement mortar (1:4) (1
47 46 cement : 4 course sand) and filling joints with 0 0.00 0.00 0.00
white cement of approved quality including
cost of all materials, labour T&P etc. required
for the work all complete as per direction of
the Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
49 48 mixed with pigment to match the shades of 0 0.00 0.00 0.00
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
frames fixing in position including cost of 0 0.00 0.00 0.00
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door
shutter (Laminates both side of frame) with
53 52 all labour, iron fittings, and wooden hinged 0 0.00 0.00 0.00
cleats etc fitted and fixed complete in all
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
55 54 toughened glassas infill shall be fitted into 0 0.00 0.00 0.00
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all
materials and cost of all labours required for
the work etc. complete in all respect as
desired by the Engineer in charge. Note -
conveyance, T&P and scaffolding are not
included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour
sliding window comprising of uPVC multi-
chambered frame having section Frame
58mm x 49mm, Window sash: 37mm x
61mm, made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements
of Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and Modulus
of Elasticity should be tested in accordance
with ASTM/DIN-ISO standards and the
57 56 thermal conductivity as per IS standards. 0 0.00 0.00 0.00
The window comprising of uPVC extruded
glazing beads of appropriate dimension,
EPDM gasket, G.I fasteners 100 x 8 mm
size for fixing frame to finished wall, plastic
packers, plastic caps and necessary
stainless steel screws etc. After fixing frame
the gap between frame and adjacent
finished wall shall be filled with weather proof
silicon sealant over backer rod of required
size. The sash will be fitted with 5mm clear
glass ( float ).complete in all respect as per
specification and direction of the Engineer in
Charge. etc. complete
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and
labour for fitting fixing etc.complete as per
the instruction of Engineer-in-Charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
63 62 wherever necessary & cost of scaffolding, 0 0.00 0.00 0.00
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete
as per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to
receive painting in walls, at all heights with
69 68 staging wherever necessary with cost, 0 0.00 0.00 0.00
conveyance, taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make to inside surface of walls finished with
Acrylic Wall putty (water based) of make
and finished smooth & even surface to
72 71 receive painting using roller to the final coat 0 0.00 0.00 0.00
including cost of scaffolding staging charges
with cost, conveyances, taxes of all
materials, cost of labour, T&P required for
the work etc. complete for all floors as per
specification & direction of the Engineer-in-
Painting two coats with approved Enamel
75 74 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
79 78 Terrace floor Sqm 4.01 173.22 694.63
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
80 79 32mm X 32mm X 2mm in 3 rows in stair 0 0.00 0.00 0.00
case as per approved design and
specification, buffing, polishing etc with cost,
conveyance, taxes, all materials, labour, T&P
etc. required for the complete in all respect.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
82 81 granite crusher broken chips on new work in 0 0.00 0.00 0.00
84 0 Sub-Total of Civil Works 0 0.00 0.00 1,40,03,194.59
85 1 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials , labour, T&P and
fixing rotational moulded polyethylene
cylindrical vertical water storage tanks
conforming to IS:12701/1996 including
cutting holes through the tank and fixing mild
steel tubes and fittings and providing extra
sockets and jam nuts, fixing ball valve etc.
including hoisting upto a height of 5 metres
above ground level and placing the tank to
the required position and providing 5.40 mtr.
lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in
staging and 0.13mtr thick circular protection
86 2 wall of 0.46mtr height to support the 0 0.00 0.00 0.00
tank,12mm thick cement plaster in cement
mortar (1:6) over brick work, RCC slab of
size 1.60mX1.60m and 0.10m thick ,RCC
beam of 0.25mx0.30m and 3.40m average
length in cement concrete (1:2:4) using
12mm size crusher broken hard black
granite chips and required steel
reinforcement including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes
etc.all complete as per approved drawing ,
P.H. specification and direction of Engineer-
2000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
cement mortar (1:4) for taking G.I. Pipes and
88 4 fittings/ P.V.C. pipes and fittings including Each 16.00 54.52 872.26
watering, curing, cost & conveyance of all
materials to worksite, payment of royality,
taxes etc. all complete as per direction of
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
89 5 fittings etc. , and repairing the holes after Each 12.00 187.74 2,252.86
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good
the damages including watering , curing ,
cost & conveyance of all materials to
worksite, payment of royality, taxes etc all
complete as per direction of the Engineer-in-
Supplying all materials, labour, T&P and
fixing vitreous china water closet, squatting
pan (Indian type W.C pan/Orissa pattern
squatting pan) duly embedded in cement
concrete (1:5:10) using 4cm size hard
granite metal including fixing a pair of
vitreous china 250mm x 130mm x30mm
91 7 footrest, fixing 100mm dia HCI 'p' or 's' trap 0 0.00 0.00 0.00
(with/without 50mm dia horn) for water colset
squatting pan including jointing the trap with
pan in cement mortar (1:1) cutting the floor
and mending good the damages , cost &
conveyance of all materials to worksite,
payment of royality , taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge.
92 8 580mm size Orissa pan Each 4.00 2940.80 11,763.18
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
93 9 masonry wall for taking U-PVC pipes and Each 30.00 210.28 6,308.28
fittings including making good the damages
etc. all complete as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-
PVC pipe and fittings including making good
the damages etc. all complete as per P.H.
specification and direction of Engineer-in-
Supplying all materials labour T&P filling
sand in lavatories well watered and rammed
including lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black
97 13 granite chips including watering, curing,cost 0 0.00 0.00 0.00
of all materials, conveyance of all materials
to work site with payment of royalty, all taxes
etc all complete as per P.W.D specification
and direction of Engineer-in-charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
99 15 materials, conveyance of all materials to 0 0.00 0.00 0.00
work site , payment of royalty, all taxes etc
all complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic
floor tiles of premium grade having thickness
7mm to 8mm conforming to IS 13755 of size
30cmx30cm to be pre-approved by the
Engineer-in-charge )
101 17 Ground floor Washrooms Sqm 44.27 1418.01 62,775.13
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of
all materials, conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Ground floor - (Qnty same as Wall Tiles in
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
104 20 materials, conveyance of all materials to 0 0.00 0.00 0.00
work site , payment of royalty, all taxes etc
all complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size 30cmx45cm to be pre-approved by the
Engineer-in-charge )
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle
bottom member with frame section No.
107 23 9221 and tapered clip no. 4660 and the Sqm 24.57 6065.64 1,49,032.69
frame to be completed by means of jointing
angle No. 1855 Including all Cost of Labour.
T&P hire charges of drilling machine. labour
charges etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized P.V.C. pipe conforming to IS
4985/2000 of the following out side dia for
class- 3 (0.60mpa ) including jointing with
supply of approved solvent cement by non-
108 24 heat application method/as per 0 0.00 0.00 0.00
manufacture's specification, provoding and
laying in trench cement concrete (1:4:8) with
40mm size hard granite metal in the type C-
1 standard bedding surrounding or encasing
including concrete for bedding and curing etc
all complete as per P.H. specification and
direction of the Engineer in charge
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
111 27 cement plaster (1:3) with cement punning to 0 0.00 0.00 0.00
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials labor T&P and
constructing MH chamber of sizes earth
work in excavation in all kinds of soil
CC(1:1:8) with black granite chips size
46mm brick work with K.B. brick having
crossing strength not less than 75 Kg /CM2
inside MH chamber over benching with
113 29 cement slush pointing (1:3)outside the MH 0 0.00 0.00 0.00
chamber providing painting MS or CI step
iron RCC(roof of slab with CC(1:2:4)with
black granite chips size 12mm bending
binding tying the grills placing of the
reinforcement providing RCC color of
required size refilling the cavity around the
MH chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak
way pit with dry brick having crossing
strength not less than 75Kg/CM2 to
99Kg/CM2 in CM(1:6) for the remaining
0.4572mm height of wall at top
CC(1:3)inside and outside inside fill with dry
brick khoa size 38mm ,CM thick RCC
115 31 perforated slab to a height of 1.9012m from Each 2.00 22144.35 44,288.70
bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all
materials to site.
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside
size 250mmx250mm with 8cm thick RCC
precast cover slab in cement concrete
(1:2:4) mix using 12mm size crusher broken
HG chips, foundation concrete (1:4:8) using
40mm size crusher broken HG metal on bed
and around trap, KB brick work in cement
116 32 mortar (1:6) in foundation and plinth and Each 6.00 1647.04 9,882.26
inside 12mm thick cement plastering (1:3)
finished with a floating coat of neat cement
including fixing 100mmx100mm size HCI
gully trap, 150mmX150mm size CI grating
etc.all complete as per drawing,
specification and direction of Engineer-in-
117 33 2 no 50 users RCC septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing &
118 34 breaking clods to maximum 5cm to 7cm and Cum 55.89 249.40 13,939.23
laying in layers not exceeding 0.30m in depth
and as per direction of the Engineer-in-
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing shoring and shuttering foundation
trenches, pits etc with close wooden planks
or sheets shuttering etc all complete as per
direction of the Engineer in charge.
Supplying all materials, labour, T&P and
filling in foundation and plinth with sand well
121 37 watered and rammed including conveyance Cum 6.16 350.70 2,160.29
of all materials to worksite, payment of
royalty, taxes etc.all complete as per
direction of the Engineer in charge.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction
of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete (1:1.5:3) with
12mm size hard broken granite chips for
123 39 R.C.C works including hoisting, laying, Cum 21.80 8069.55 1,75,916.15
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying
the grills and placing in position including cost
124 40 of binding wire 18 to 20 gauge, conveyance Qntl 32.70 10156.97 3,32,132.85
of all materials to worksite, payment of
royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
shuttering for R.C.C works including false
work and dismantling them after casting
including conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction
of the Engineer in charge
R.C.C floor and roof slabs, landings,
126 42 balconies, projecting sunshades and chajjas Sqm 16.00 515.54 8,248.67
up to 4.30 mt height
R.C.C beams,columns,girder and bressmer
Supplying all materials, labour, T&P and
providing 6mm thick cement plaster (1:4) on
RCC work including watering, curing,
128 44 conveyance of all materials to worksite, Sqm 79.36 188.56 14,964.44
payment of royalty, taxes etc all complete as
per specification and direction of the
Engineer in charge
Supplying all materials, labour, T&P and
providing cement punning including watering,
129 45 curing, conveyance of all materials to Sqm 79.36 38.94 3,090.28
worksite, payment of royalty, taxes etc all
complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and
providing 12mm thick cement plaster (1:4)
on brickwork including watering, curing,
130 46 conveyance of all materials to worksite, Sqm 10.56 182.43 1,926.44
payment of royalty, taxes etc all complete as
per specification and direction of the
Engineer in charge
Supplying all materials, labour, T&P and
providing brick work with K.B bricks having
crushing strength not less than 75kg/cm²
with dimensional tolerance ± 8 percent in
131 47 cement mortar (1:4) including watering, Cum 1.20 5157.78 6,189.34
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction
of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
making MS step iron in 20mm diameter MS
steel bars and fixing into walls of man
132 48 hole/septic tank duly embedded in cement Each 16.00 297.12 4,753.98
concrete (1:3:6) complete as per
specification and direction of the Engineer in
Filling in foundation and plinth with excavated
materials, moorum including watering and
ramming as directed by the Engineer in
134 50 Pump House of size 8'-0''x8'-0'' (Internal) 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil with in 1.5m initial lift including
135 51 dressing and leveling of bed and breaking Cum. 7.63 249.40 1,902.96
the clods and the excavated materials with in
50m initial lead as per direction of Engineer
Supplying all labor T&P & filling sand in
foundation and plinth with well watered &
rammed etc. all complete as per direction of
Supplying all materials, labor T&P providing
CC (1:4:8) with 4 cm HG metal including
watering curing lead of all materials to site
Supplying all materials labour T&P and
providing 1st class Fly Ash brick work in CM
(1:6) in F&P including watering and curing
and lead of materials to site.
Supplying all materials, labour, T&P &
providing 2.5cm thick D.P.C. flooring with
cement concrete (1:2:4) 12mm hard broken
granite chips including conveyance of all
materials, watering curing payment of royalty
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all materials, labor T&P providing
CC (1:2:4) with 4 cm HG metal including
watering curing lead of all materials to site
Supplying all materials labour T&P and
141 57 providing 1st class Fly Ash brick work in CM Cum. 6.68 4929.10 32,926.36
(1:6) in Super Structure including watering
and curing and lead of materials to site.
Providing C.C. (1:1½:3) with 12mm size
hard granite chips of RCC work including
hoisting and laying and curing with lead of all
materials to site.
Supplying all materials, T&P and providing
MS reinforcement for RCC work including
143 59 cutting, bending, binding and tying the grills Qtl 1.22 10156.97 12,391.50
and placing in position including cost of
binding wire 18 to 20 gauges.
Supplying all materials labour T&P and
providing 12mm thick C.P (1:6) including
watering curing and conveyance of all
materials to site.
Rigid & smooth centering & sheltering for
RCC work including falls work & dismantling
than after casting including cost of materials
in ground floor.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
RCC floor, roof slab chhaja up to 4.430 m
Supplying all materials, labour, T&P &
providing 2.5cm thick A.S. flooring with
cement concrete (1:2:4) 12mm hard broken
granite chips including conveyance of all
materials, watering curing payment of royalty
taxes etc. all complete as per direction of
Engineer-in-charge.
Supplying all labor T&P & filling foundation
and plinth with excavated materials well
watered & rammed etc. all complete as per
direction of EIC.
149 65 Supplying all materials labour T&P providing 0 0.00 0.00 0.00
on two coats of white washing ceiling
150 66 Same as Plaster Area Sqm 62.15 14.63 909.38
Supplying fitting, fixing in position angle iron
window frame made out of 35mm x 35mm x
5mm, M.S. angle with required nos. of
hinges and steel shutter made out of 25mm
x 25mm x3mm, M.S. angle fitted with 20
gauge G.P. sheet/ steel plate and welded
151 67 with tower bolt, handle hold fast & M.S. flat of K.G. 103.00 101.57 10,462.16
19mm x 3mm & welded with entire grill on
windows and one coat of red oxide primer
and fixing with C.C. (1:3:6) using 12mm size
HBG CB Chips and making good to the
damages and finishing the exposed surface
smooth with watering curing etc. as per
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89
152 68 of the following nominal bore, tube fittings 0 0.00 0.00 0.00
and clamps including making the wall good.
ceiling and floor, testing all complete as per
specification and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
153 69 20mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 160.36 8,018.10
154 70 25mm dia PVC ASTM pipe (sch-80) Mtrs. 150.00 220.54 33,081.30
155 71 32mm dia PVC ASTM pipe (sch-80) Mtrs. 80.00 289.93 23,194.08
156 72 40mm dia PVC ASTM pipe (sch-80) Mtrs. 75.00 381.26 28,594.35
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings including fixing the
157 73 pipe with clamps at 1.00 m spacing. This 0 0.00 0.00 0.00
includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of
joints complete as per direction of Engineer-
Supplying all materials, labour T&P and
fitting and fixing brass/CP fittings of the
following nominal bore with supply of all
joiniting materials including cost &
conveyance of all materials to worksite,
payment of taxes etc. all complete as per
P.H specification and direction of the
Engineer-in-charge.
160 76 15mm dia CP angle stop cock Each 26.00 1016.33 26,424.68
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
161 77 15mm dia CP two in one bib cock Each 6.00 1480.90 8,885.40
162 78 15mm dia CP Bib cock Each 6.00 1306.73 7,840.39
163 79 15mm dia CP Long Body Bib cock Each 16.00 1713.24 27,411.87
164 80 15 mm dia CP Bib cock Elbow Action Each 10.00 2700.43 27,004.30
165 81 20mm dia CP concealed stop cock Each 4.00 894.56 3,578.23
166 82 25mm dia brass full way valve Each 8.00 1094.21 8,753.71
167 83 32mm dia brass full way valve Each 10.00 1601.85 16,018.50
168 84 40mm dia brass full way valve Each 4.00 2034.32 8,137.28
169 85 15mm dia CP Health faucet Each 6.00 1945.47 11,672.80
170 86 15mm CP Extension piece Each 64.00 69.97 4,478.34
172 88 15mm size C.P. flange Each 64.00 47.55 3,043.46
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
173 89 lubricant by non-heat application method/as 0 0.00 0.00 0.00
per manufacturer's specification, testing,
earthwork in excavation in all kinds of soil
and refilling of trenches , cost & conveyance
of all materials to worksite, payment of
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
177 93 110mm U-PVC Plain bend Each 20.00 273.76 5,475.20
180 96 110mm U-PVC offset without ear Each 20.00 480.73 9,614.64
Supplying U-PVC D/Jn door labour, T&P and
all materials, Each 5.00 650.42 3,252.08
fixing the following vitreous china Wash
Down Water Closet (European type W.C
pan) with integral ‘P’or ‘S’ trap to the floor
with wooden plug and chromium plated
pedestal screws including jointing the trap
with soil pipe in cement mortar (1:1), fixing
plastic seat and cover for wash down water
185 101 closet with chromium plated brass hinges Each 1.00 14170.27 14,170.27
and rubber buffers including polishing etc all
complete as per specification and direction
of the Engineer in charge.SINGLE PIECE-
WATER COLSET P TRAP - LYS-WHT-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fixing the following vitreous china Wash
Down Water Closet(European type W.C.
pan)with integral 'p' or 's' trap to the floor with
wooden plug and chromium plated pedestal
screws including jointing the trap with soil
186 102 pipe in cement mortar (1:1) fixing plastic seat 0 0.00 0.00 0.00
and cover for wash down water closet with
chromium plated brass hinges and rubber
buffers including polishing , cost &
conveyance of all materials to worksite,
payment of royality, taxes etc. all complete
as per P.H specification and direction of the
Engineer-in-charge
187 103 European water closet with 's' trap plain Each 5.00 3056.67 15,283.36
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or
M.S. brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
188 104 connection with inlet, outlet and overflow 0 0.00 0.00 0.00
pipes, 32mm dia CP long flush bend, 15mm
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
Dia CP long flush bend
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
wash basin including brass check nut
190 106 complete, fixing pillar taps capstan head 0 0.00 0.00 0.00
screw down high pressure lettered 'Hot' and
'Cold' with long screws, shanks and back
nuts of 15mm dia nominal bore, fixing 15mm
dia PVC inlet connection pipe and making
connection with pillar cocks and supply
mains for wash basin, fixing 32mm dia CP
brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
191 107 550mmx400mm W.H.basin with 15mm dia Each 14.00 6609.30 92,530.17
C.P.pillar cock with PEDESTRAL
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P for fitting
& fixing Kitchen sink of all standard sizes with
192 108 a pair of bracket, C.P. waste, trap & P.V.C. Each 4.00 5789.08 23,156.32
waste pipe & painting brackets including
supply of cement concrete & mortar etc. all
complete. 24” x 18” x 10” sink
Supplying all materials, labour, T&P and
fixing standard sized CP towel rail complete
with CP brass brackets fixed to wooden
plugs with CP screws as per specification
and direction of the Engineer in charge
194 110 25mmx600mm long CP towel rail Each 11.00 824.70 9,071.72
Supplying all materials, labour, T&P and
fixing standard sized glass-shelf with CP
brass brackets and guard rail complete fixed
to wooden plugs with CP screws as per
specification and direction of Engineer in
197 113 600mmx125mm plate glass shelf Each 14.00 707.29 9,902.09
Supplying all materials, labour, T&P and
fixing mirror of superior glass mounted on
198 114 6mm.thick A.C. sheet or ply wood sheet and 0 0.00 0.00 0.00
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and
fixing CP soap holder complete with CP
200 116 brass brackets fixed to wooden plugs with 0 0.00 0.00 0.00
CP screws as per specification and direction
of the Engineer in charge
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red 0 0.00 0.00 0.00
lead and yarn nail complete as per direction
of Engineer in charge.
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 120 PSS UV of size 750 x 570 x
1350mm hight with water storage capacity
204 120 120 liter's along with 3 noa of faucets 2 for 0 0.00 0.00 0.00
cold water and 1 for normal water including a
flow of 1.5 ltr per munite etc all complete as
per approved drawing , specification and
direction of the Engineer in charge
205 121 Aqua guard pure Chill 120 PSS UV Each 2.00 119528.10 2,39,056.20
Construction of 1 nos production well
including scientific source finding through
206 122 consolidated and unconsolidated rock with 0 0.00 0.00 0.00
down the ODEX drilling rig with PVC, GI, MS
pipe and installation of submersible pump set
with all accessories.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Sl. No. Labour for drilling a perfectly vertical bore
hole of specified dia for a specified depth
below ground level through consolidated and
unconsolidated rock with combination drilling
rig as required to suit the site condition as
per the direction of Engineer-in-charge
including supply of own rig with its
accessories, tools and plant and
consumables etc. for lowering of 200mm
/150mm dia M.S. Pipe / PVC casing fitted
with socket and with or without well screen
as per the necessity for sub-medium hard
and boulder formation (M.S./PVC casing
pipe if required to prevent collapse of over
burden is to be provided by contractor
including lowering and withdrawing after
completion of the tube well) 200mm dia x
400mm dia in over burden position inlcluding
packing of gravel supplied by Contractor for
400mm bore only etc as per direction of
Engineer incharge.
208 124 Drilling for 200mm dia bore 0 0.00 0.00 0.00
211 127 Drilling for 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I. / PVC /
M.S. housing pipe with or without slotted pipe
as per the necessity for ground level upto 45
mtr depth and fitted and fixed up perfectly
vertical position including cutting and
213 129 threading of pipes and slotted pipes and 0 0.00 0.00 0.00
supplying and fixing all jointing materials,
tools and plants etc all complete and keeping
the top of the casing pipe threaded including
plugging tube wells to prevent entry of
foreign materials.
Lowering 200mm dia M.S.ERW pipe casing
cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge in obtained from the 0 0.00 0.00 0.00
tube well including supply and use of all
necessary equipment and labour as per
direction of Engineer-in-charge.
Supplying all labour, materials and T&P for
providing sanitary sealing by cement
concrete grouting of annular space around
218 134 M.S. casing pipe uptp 5 mtr below groun No. 1.00 1902.11 1,902.11
dlevel to plug the bore hole excluding cost of
cement etc all complete as per direction of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89
219 135 with following specifications with suitable 0 0.00 0.00 0.00
control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning,
trial running, conveyance of all materials to
worksite, payment of taxes etc all complete
as per specification and direction of the
Engineer in charge
2 H.P. Single phase/ three phase 7 stage
head renge of 20 to 35 mtr with discharge
capasity 145 to 110 L.P.M With outlet dia 25
221 137 DOL Control panel Each 2.00 4490.49 8,980.98
222 138 40mm dia steel short piece Each 2.00 179.71 359.43
224 140 50mm size CI bracket Pair 1.00 107.73 107.73
226 142 20mm dia rigid UPVC pipes Mtr 90.00 8.14 732.78
227 143 Steel rope with cover Mtr 90.00 31.51 2,835.54
Labour charges for lowering including
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to
IS: 4984/2000 (10kgf/sqcm) of the following
229 145 nominal bore with clamps and jointing by 0 0.00 0.00 0.00
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction
of the Engineer in charge
231 0 Sub-Total of Plumbing Works 0 0.00 0.00 34,50,672.30
232 1 Electrical Works 0 0.00 0.00 0.00
Point wiring in Recessed wirring to light
point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular
type(( falme retradant type)) switch ISI
marked and ceiling rose ISI marked of
modular type G.I box with metallic cover
plate (both side) falme retradant type) of
suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core multistandard
233 2 copper conductor as earth wire including all 0 0.00 0.00 0.00
accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular
type(( falme retradant type)) switch ISI
marked , and ceiling rose ISI marked of
modular type G.I box with metallic cover
plate (both side) falme retradant type) , of
suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core multistandard
copper conductor as earth wire including all
accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within
warranty period for acceptance of materials.
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. , complete suitable for for
HOSTEL.(Maximum 02 nos point in one
238 7 circuit).All the switches & sockets should be Nos 31.00 227.74 7,059.94
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. , complete suitable for
Residence.(Maximum 02 nos point in one
239 8 circuit).All the switches & sockets should be Nos 66.00 597.08 39,407.28
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. , (For equipement power)All the
switches & sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Receass wiring for circuit/submain wiring
with the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable or equievalant reputed
make A catagory ISI marked as approved, in
241 10 recessed PVC conduit Heavy duty FRLS of 0 0.00 0.00 0.00
mentioned size as required as per direction
of Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
242 11 conductor. In 20 mm dia non metallic heavy Mtr 211.00 153.40 32,367.40
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
243 12 conductor in 20 mm dia non metallic heavy Mtr 233.00 169.92 39,591.36
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A
SOCKET) (4X2.5+2X2.5)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
246 15 conductor in 32 mm dia non metallic heavy Mtr 35.00 287.92 10,077.20
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR
PANEL TO TPN BDB light ) (4X10+2X4)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
250 19 direction of Engg.-in-Charge.. . ,All the Nos 13.00 723.34 9,403.42
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as required as per
direction of Engg.-in-Charge. .All the
251 20 Components should be warrantied for a 0 0.00 0.00 0.00
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
255 24 including cutting the wall and making good 0 0.00 0.00 0.00
the same in case of recessed conduit as
required as per direction of Engg.-in-Charge .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher as required as per direction of Engg.-
in-Charge.All the Components should be
warrantied for a replacement period of 5 Nos 6.00 121.54 729.24
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within
warranty period for acceptance of materials.
Supplying and installation of AC starter
Modular type, coil voltage-415 Volt A.C. & O/L
range of 9-14A range on mod Box of suitable
size including modular coveras required as
per direction of Engg.-in-Charge .All the
259 28 Components should be warrantied for a Nos 13.00 724.52 9,418.76
replacement period of 5 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover. .as
required as per direction of Engg.-in-
Charge.All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within
warranty period for acceptance of materials.
S/F of Bakelite angle holder/batten holder of
ISI marked conforming to IS-1258/1987 in
place of ceiling rose as per direction of Engg.-
in-Charge .All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge.., complete
suitable for IPH standard hospital.It should
262 31 be warrantied for a period of 10 years Nos 23.00 49.56 1,139.88
against manufacturing defects against which
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
263 32 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep of exhaust fan in
264 33 the existing wall, including fixing & Nos 12.00 3648.56 43,782.72
conntection as required as per direction of
Engg.-in-Charge. Replacement Warranty will
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 1400 mm sweep
white/milky colour ceiling fan including
wiring the down rod of standard length (upto
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-Charge.Replacement
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan including
wiring the down rod of standard length (upto
266 35 30 cm) with 1.5 sq mm PVC insulated, copper Nos 20.00 2361.18 47,223.60
conductor, single core cable etc. as required
as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality
frosted diffuser for glare-free uniform
lighting distribution with wattage not more
267 36 than 20 watt and lumen output of 1500 Nos 55.00 1788.88 98,388.40
lumens, , CRI not less than 80,CCT of 6000
degree K,THD less than 10%, with electronic
driver, internal surge protection of 2.5 KV ,
L70 B50: 30000 hrs (2 yrs warranty) and all
other accessories suitable for operation on
220 V to 240 V supply as required as per
direction of Engg.-in-Charge. .The luminaire
SITC of be Replacement
energy Warranty
efficient LED will be
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
268 37 lumen complete with electronic driver and all Nos 25.00 938.10 23,452.50
other accessories with diffuser having 5
years warranty i/c connection etc as
required as per direction of Engg.-in-Charge..
The luminaire should be Replacement
Warranty will be 5 years .
SITC of Sleek LED 10-12 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient diffuser,above
wash basin complete with all accessoriesetc.
directly on wall, including connection with 1.5
sq. mm FRLS PVC insulated, copper
conductor, single core cable and earthing etc.
as required as per direction of Engg.-in-
The luminaire should be Replacement
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing
PMMA diffuser, with wattage not more than
20 watt and lumen output not less than 2600
Lumen ( 120 lumens/watt ) of size240 x240 x
40 mm , ,CRI not less than 80,CCT of 5700-
6500 degree K,THD less than 10%, with Non
270 39 integrated isolated driver (protects the Nos 28.00 2357.64 66,013.92
output /secondary side from any disturbance
on the input / primary side ensuring safe
operation), all other accessories , life : 50,000
burning hours (5 years warranty) , Internal
surge protection of 3 KV suitable for
operation on 230 V, 50 Hz supply as required
as per direction of Engg.-in-Charge. The
luminaire should be Replacement Warranty
will be 5 years.
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
including wiring with 1.5 sq mm PVC
271 40 insulated, copper conductor, single core cable Nos 6.00 2542.90 15,257.40
etc. as required as required as per direction
of Engg.-in-Charge.Replacement Warranty
will be 5 years.
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge .
272 41 (Note : More than 5 cm length shall be Nos 35.00 37.76 1,321.60
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as approved.
SITC of energy efficient LED 45W for lighting
from top having power rating not more than
45 watt and lumen output not less than 4500
lumen complete with electronic driver and all
273 42 other accessories with diffuser having 2 Nos 6.00 4363.64 26,181.84
years warranty i/c connection etc as
required as per direction of Engg.-in-Charge. .
The luminaire should be Replacement
274 43 Warranty
BDBS,DB,ACwill be 5 yearsPANELS,MCBS
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board,
415 volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
be fabricated to withstand IK09,the DB
should be properly pre-treated with 7 tank
process and duly powder coated,
phosphatized with powder coated finish, on
surface/recess, complete with terminal
blocks,with suitable size FR PVC insulated
copper conducter up to terminal blocks,
tinned copper busbar, neutral busbar, earth
bar, din bar. . as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
276 45 with neutral Bus bar, Earth Bar & Cable ties Nos 2.00 2553.52 5,107.04
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar, earth
bar, din bar, detachable gland plate,
277 46 interconnections, phosphatized and powder Nos 2.00 2244.36 4,488.72
painted including earthing etc. as required
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT
LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
278 47 door)(only each EM. CONNECTION UPS Nos 2.00 1923.40 3,846.80
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The MCB
should be Replacement Warranty will be 5
years .MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
or equievalant reputed make & model A
catagory ISI marked as approved. the existing
MCB DB complete with connections as per
direction of Engg.-in-Charge. The MCB
should be Replacement Warranty will be 5
years.MCB should have the fault indication
system in different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
281 50 existing MCB DB complete with connections Nos 2.00 1990.66 3,981.32
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
282 51 existing MCB DB complete with connections Nos 2.00 2270.32 4,540.64
as per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA or equievalant reputed make &
model A catagory ISI marked as approved in
the existing MCB DB in the existing MCB DB
complete with connections as per direction of
Engg.-in-Charge.(for power BDB & AC ODU, 8
way TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
284 53 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
pouring arrangements, brick masonary
285 54 enclosure on top with removable RCC cover Nos 4.00 3701.66 14,806.64
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
286 55 surface or in recess for loop earthing as Mtr 122.00 112.10 13,676.20
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections Mtr 25.00 1243.72 31,093.00
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade of
following size cables as per direction of
289 58 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
294 63 trench in one horizental formation including Mtr 65.00 151.04 9,817.60
excavation ,sand coushing protection
covering and refilling the trench etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
295 64 exceeding 25 SQ. MM direct in ground in the Mtr 33.00 48.38 1,596.54
EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
296 65 25 SQ. MM but not exceeding 400 SQ. MM Mtr 25.00 66.08 1,652.00
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not Mtr 12.00 40.12 481.44
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
298 67 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 12.00 53.10 637.20
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
299 68 exceeding 25 SQ. MM in surface with shaddle Mtr 15.00 94.40 1,416.00
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
300 69 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 23.00 149.86 3,446.78
surface with shaddle and screw etc as
required as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs 0 0.00 0.00 0.00
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
G.I. pipe (medium class) in ground complete
304 73 with G.I fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
306 75 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out by
2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
309 78 designed as G.A drawing as per direction of Set 1.00 99774.90 99,774.90
Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be 5
years & compelete test certificate must be
submitted along with panel board including
component list.
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25
Ka & 01 nos of40A 4P O/L changeover switch 0 0.00 0.00 0.00
for DG & Servo with 40A 4P MCB. .
(Icu=100%Ics)with shunt trip.with axulary
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded 0 0.00 0.00 0.00
PVC sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 6 NOS FOR
Out going- (ii) 06 nos 32A 4P MCB LIGHT
314 83 BDB AC IDU BDB/LIGHT 0 0.00 0.00 0.00
BDB,LIFT,WATER,solar,ups
Out going- (iii) 06 no 32A 2P MCB LIGHT BDB
BDB,LIFT,WATER,solar,ups
Instrument- (i)3 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter
with CT for voltage,current,frequency,PF,THD
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of or equievalant
reputed make & model A catogory, ISI
marked as approved .The Load bearing
capacity of the Cable Trays should be
318 87 minimum of 104.8Kg/meter at the span of mtrs 12.00 702.10 8,425.20
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION
with internal dimensions of size 54mm(H) x
200mm(W), of or equievalant reputed
make ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
10 KVA UPS SYSTEM(OFFICE & EMERGENCY
Supply ,installation ,testing & commissioning
of 10 KVA ON LINE UPS SYSTEM WITH
suitable size battery bank, rated of battery &
isolation transformer, IGBT based inverter
system with inbuilt isolation transformer &
automatic phase sicuency corrector of 3ph in
put to 3 ph output,415V,protection for fault
by OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of or equievalant reputed
321 90 make A catogory, ISI marked as approved ) Set 1.00 498697.50 4,98,697.50
including supply of rack inverter stand with
sufficient backup upto 30 MINUTES with all
required accessories to complete the job
including all connection.LOAD OF CONF.) as
per direction of Engg.-in-Charge. Warrentee
period of all accessories & component &
system must be 5 years & compelete test
certificate must be submitted along with ups
including component list & SLD.
322 91 20 KVA DG WITH AMF PANEL 0 0.00 0.00 0.00
Supply, Transportation, erection, testing and
commissioning of 3 Phase, 415V, 50Hz, water
cooled multi cylinder diesel generator set
with alternator of 20 KVA with suitable AMF
panel out put contineous rating directly
coupled Engine and Alternator with guard
and mounted on a common base plate of
Robust construction and complete without
AMF panel having IP-52 protection, Acoustic
323 92 Enclosure as per CPCB norms , sound 0 0.00 0.00 0.00
absorbing material, to restrict sound level up
to 75 dB up to 1 mtr distance and as per CPCB
norms etc as per following specifications
mentioned below.
A. Alternator as per direction of Engg.-in-
Charge. Warrentee period of panel must be 5
years & compelete test certificate must be
submitted along with DG set including
component list & smoke exhaust system
drawing,certified ISO
ALTERNATOR:The 8528 of the output
rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8
P.F. lagging at 1500 RPM. The alternator is
324 93 self excited, self regulated, and shall confirm 0 0.00 0.00 0.00
to IS: 13364 of 1992 with regulation of +5%
from no load to full load. degree of
protections shall be IP21.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
ENGINE: Diesel Engine . Diesel Engine start,
developing suitable BHP output at 1500 RPM
with mechanical / electronic governing so as
to enable the alternator to give 20 KVA
continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable
of providing 10% O/L for 1 Hr for every 11
Hrs of continuous running at full load. The
325 94 engine with 1st filling of oil and Diesel etc. 0 0.00 0.00 0.00
01. Exhaust pipe of required size and length
with insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
BASE PLATE: Common Base Plate of required
size for mounting of Engine Alternator Set
fabricated from MS Channerl and vibration 0 0.00 0.00 0.00
damping arrangement with cushy foor
mounting including paintng etc. as required.
FOUNDATION: Suitable size Cement Concrete
(1:2:4) foundation duly plastered and
finished with neat coat Cement as required
along with smoke exhaust system piping
including base frame of structure & lightening
protection system. *It also includes 2 nos GI
327 96 pipe earthing for body and 2 nos copper plate 0 0.00 0.00 0.00
earthing for neutral, control cable of 15mtr
2.5sqmm 6core , civil foundation work.
(The Manufacturing of DG set shall not in any
case be more than six months old from the
date of award of work)
AMF PANEL: Cubical, Compartmentalized,
AMF Panel Baord with all Power & Control
Contractors, Switches, Meters and other
328 97 accessories, Internal Wiring, connection, inter- set 1.00 734769.48 7,34,769.48
connection etc. for Trouble Free smooth
function for 20KVA DG Set complete with
Battery Charger & leads as required.
329 98 Sub-Total of Electrical Works 0 0.00 0.00 23,90,481.35
Supply of A,C with indoor and outdoor unit
332 2 1.5 TR high wall split A.C Each 3.00 55445.84 1,66,337.52
333 3 2 TR high wall split A.C Each 3.00 65711.84 1,97,135.52
334 4 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
336 6 1 TR to 3 TR high wall split A.C mtr 12.00 988.84 11,866.08
Supply,installation & fabrication of MS base
frame for both indoor and outdoor unit and
other nesessary material to complete the
339 9 1 TR to 3 TR high wall split A.C no 16.00 1984.76 31,756.16
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,installation & fabrication of
341 11 Insulated drain water piping from indoor to 0 0.00 0.00 0.00
nearestdrain point separate to all and other
nesessary material to complete the job.
343 13 SHEET METAL WORKS 0 0.00 0.00 0.00
345 15 Supply,laying of control cable and other 0 0.00 0.00 0.00
nesessary material to complete the job.
346 16 For 1 TR to3 TR high wall split A.C mtr 22.00 145.14 3,193.08
347 0 Sub-Total of HVAC Works 0 0.00 0.00 4,13,139.24
348 0 Firefighting Works 0 0.00 0.00 0.00
349 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity
confirming to IS: 2878 made from ISI marked
seamless cylinder confirming to IS: 7285,
350 2 fitted with ISI marked controlled valve Nos 4.00 12302.68 49,210.72
confirming to IS: 3224, high pressure 1mtr
discharge hose & horn complete with initial
gas charged with carrying handle & wall
mounting bracket as per direction of
Engineer-in-charge.
351 3 FIRE SIGNAGES SYSTEM 0 0.00 0.00 0.00
Providing and installing in position the
following type of sign boards made out of
3mm thick "Opaque" PVC foam board with 0 0.00 0.00 0.00
computer cut, PVC non-reflective self
adhesive vinyle painted foam board, complete
with mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow
353 5 Left,Fire Exit Arrow Right" of 1.5in height Nos 6.00 1080.88 6,485.28
letters in white with green back ground.The
size of the board shall be 25cm x 15 cm and
shall be fixed at the height of 2 mts
354 0 Sub-Total of Firefighting Works 0 0.00 0.00 55,696.00
355 Grand Total 2,03,13,183.48
355 Grand Total 2,03,13,183.48
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SON 005 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sonepur PHC.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .