Fluorescent lamps (Fluorescent tubular lamps)

Fluorescent lamps (Fluorescent tubular lamps)

Lamp starter (Ignitors - Starting device) for HPSV Lamps

Metal Halide lamps)

Light Emitting Diode LED Fixture- LED tube light

Lamp Ballast for HPSV Lamps

Lamp Ballast for HPSV Lamps Fluorescent Lamps (Fluorescent Tubular Lamps) ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Flourescent tubular lamps conforming to IS: 2418:1977 (Part1

2

3 and 4) with latest amendments Yes * ISI Marked Yes * If ISI market 'Yes' declare CM/L No 7083873 * Star rating level 3 Star 3 Star

5 Star Rated Wattage (in Watts) 36W 18W HL

36W HL

18W

36W Rated Colour 6500 K * Rated Luminous flux with colour rating 2425 for 36W with 6500 K 1250 for 18W HL with 6500 K

3100 fpor 36W HL with 6500 K

1015 for 18W with 6500 K

1/18 2425 for 36W with 6500 K CONSTRUCTIONAL Cap designation G-13 * Method of starting With starter * Cathode type Pre heated * Rated life of lamp Minimum 5000 hours * "The lamp dimensions shall he as speciiied on the individual lamp data sheet in IS : 2418 ( Part II )-1977 with latest amendments" Yes * Marking on the lamps as per IS:2418 :1977 (Part 1) with amendments and marking requirements as per energy star requirements Yes * WARRANTY Guaranteed period of replacement 1 year * REPORTS AND CERTIFICATION Flourescent tubular lamps shall pass and comply with all the acceptance test requirements as per Cl 6 1 2 of 2418 1977 (Part1) with latest amendments And seller shall furnish test reports on demand by buyer/consingee Yes * Flourescent tubular lamps shall pass and comply with all the routine test requirements as per Cl 6 1 3 of : 2418:1977 (Part1) with latest amendments And seller shall furnish test reports on demand by buyer/consingee Yes * For Energy Star Level Flourescent tubular lamps shall comply with Gazeettee notification No. S.0.178(E) dated 16th January

2009

S.0.179(E) dated 16th January

Yes * 2/18 No.2/11(5)/03-BEE.-1 dated 6th July

Amdt.

No.2/11(5)/03-BEE-1 dated 5th January

2010 Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes * Test Report Number CGCEL-0012 * Test Report Date 0/09/2017 * Name of Lab Crompton Greaves Consumer Electrical limited * Address of Lab vill-kural tal padra baroda * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Gupta 444109

OFFICE OF THE CHIEF ENGINEER O&M

MSPGCL

THERMAL POWER STATION

PARASDEEP

Vidyut Nagar

Paras Dist. Akola Maharashtra- 444 109 300 15 Lamp Starter (Ignitors - Starting Device) For HPSV Lamps

Metal Halide Lamps) ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard As per IS:12449 Part 1 - 1988 and Part 2 - 1988 latest * ISI Marked Yes Yes 3/18 ISI marked if ''YES" declare BIS Licence number

If ''NO'' write NA NA * The lamp type for which the starting device (Ignitors) is suitable for Discharge Lamps (HPSV Lamps/Metal halide Lamps) * The lamp wattage for which the starting device (Ignitors) is suitable 400 W 400 W Starting devices (Ignitors) for discharge lamps for use on ac supplies up to 1000 V

50 Hz

which produces starting pulse not greater than 5 KV Yes * Starting device (Ignitors) shall pass the type test requirements as per Cl 7 (1) of IS:12449 Part 2 1988 latest Yes * CERTIFICATION Availability of Type Test Report from Central Government/NABL/ILAC accredited lab to prove conformity to specification Yes * All the test reports shall furnish to the buyer/consignee on demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Gupta 444109

Paras Dist. Akola Maharashtra- 444 109 500 15 Light Emitting Diode LED Fixture- LED Tube Light ( 200 ) Technical Specifications 4/18 * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 22 Watt/2200 lumen 22 Watt/2200 lumen Colour Temperature (K) 6500 2700

4000

5700

6500 Warranty for free replacement (Years) 2 years 2 years

3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate

Glass LED Fixture With Al back

front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With * Light Source SMD LED Chip * LED Make EDISSION

ORIENT * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) </= 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be Yes * 5/18 observed and light should alight for more than 15 min after the test Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0

25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date 4514/475KMSYSKA * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report 2.2.2015 * Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Gupta 444109

Paras Dist. Akola Maharashtra- 444 109 200 15 6/18 Lamp Ballast For HPSV Lamps ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked No Yes

No ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 400 W 400 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage

the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- Yes * 7/18 magnetic materials as pe Cl 10 of IS:15882:2009 latest Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 38 Watts maximum for 400 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare t+5% * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of 1 Year * 8/18 replacement CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Watt Loss

Tw details Yes * Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes * Test Report Number - * Test Report Date - * Name of Test Lab - * Address of Test Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Gupta 444109

Paras Dist. Akola Maharashtra- 444 109 50 15 Lamp Ballast For HPSV Lamps ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 Yes * 9/18 latest ISI Marked Yes Yes

No ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 150 W 150 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage

the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * 10/18 Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 19 Watts maximum for 150 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare Tolerance : t+ 5%

10% * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Tw details Yes * Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes * Test Report Number - * Test Report Date - * 11/18 Name of Test Lab - * Address of Test Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Gupta 444109

Paras Dist. Akola Maharashtra- 444 109 100 15 Lamp Ballast For HPSV Lamps ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked Yes Yes ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 70 W 70 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * 12/18 Supply current: At rated voltage

the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * 13/18 Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 15 Watts maximum for 70 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare +5% * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Paras Dist. Akola Maharashtra- 444 109 100 15 Lamp Ballast For HPSV Lamps ( 75 ) 14/18 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked Yes Yes ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 150 W 150 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage

the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of Yes * 15/18 IS:15882:2009 latest Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 19 Watts maximum for 150 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%

10%) - must declare 5 * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * 16/18 CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast

Paras Dist. Akola Maharashtra- 444 109 75 15