Balance (Civil Work) of Tourist Reception Center at Tourist Facilitation Centre, Harnag Anantnag

Amount

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete).

12 mm thick cement plaster on ceilings, plinth etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). External up to 10 Mtr Height.

Providing and fixing of U-PVC sliding/casement/fix doors in whote colour,frame 60mm thick (min) x 45mm (min) with 1.5 mm GI reinforcement sash 39mm (min) 58mm (min) with 1.25mm GI U section reinforcement with rubber gasket of grey / black colour 10 years warranty against weathering of profile with complete hardware fittings fixed with 12mm thick laminated board panels as per design and with 5mm toughened glass and fiber jalli option if pre- febricated on german fabrication system( mosquito sash 18mm(min) x 43mm(min)(with welled cornes) complete at site including fixtures

Providing & fixing U-PVC system in walls in white colour,frame 60mm (min)x45 mm (min) with 1.5 mm GI reinforcement,sash 39 mm (min)x58 mm(min) with 1.25 mm GI- U section reinforcement with rubber gasket of grey/black colour, 10 years warranty against weathering of profile with complete hard ware fittings and with 5mm clear toughned glass with 12mm thick laminated board panels as per design wherever required pre-fabricated on German Fabrication system(Mosquito sash 18 mm(min)x43 mm(min) (with welded corners ) complete at site. (For partition Walls )

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing and fixing 35 mm thick panelled door shutters (Ist class Kail Wood). with ornamentals Kail Wood pannels including necesary stainlless Steel Butt hinges /screws etc.Design of shutter and pannels as per the instructions of Engineer incharge complete in all respects pannelling in door shutters.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood 35 mm thick.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood 35 mm thick.

Providing and fixing 4mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete

Painting with synthetic antique brown enamel paint with of approved brand and manufacture including applying priming coat with ready mix of approved brand and manufacture on wood work etc. including cost and carriage of all materials equipments complete job as per drawings, specifications and as directed by the engineer Incharge.(doors ,windows soffit,eves board posts etc)

Polishing on wood and wood based surfaces with Touch wood matt finish polish two coats) including preparing the surface smooth (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications .(anadised aluminium)

Tower bolts 100mm (windows)

Handle 100mm (window)

I-Hooks 150mm

L-drop 250mm

Tower bolts 150mm (doors)

Handle 125mm (door)

butt hinges of 100x63x3.2 mm

Granite Work in Floors :- Providing and fixing ( gang saw cut mirror polished (flamed , pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc.( flamed instaircase) of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

Granite Work on Walls /Skirting :- Providing and fixing ( gang saw cut mirror polished (pre-moulded and pre-polished), machine cut on Walls /Skirting . of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

Providing and fixing 1st quality Vitrified Double Charged tiles in floor/skirting etc. of standard thickness of approved make in all colours, shades, design and prints as approved by the engineer-in-charge over 12 mm thick bed of cement mortar 1 : 3 (1cement 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg per Sqm. Including pointing in white cement mixed with pigment of matching shade with all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge .

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Antiskid Vitrified pavement tiles(ramp tiles) 300x300x08mm thick laid on 20mm thick cement mortar 1:4 1 cement: 4 coarse sand] and jointing with Tile Grout as per approved colour complete as directed by Engineer-in-charge.

Providing and applying white cement based putty of 2 mm thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall / ceiling Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing & applying Plaster of Paris (gypsum anhydrous) suspended false ceiling Cove false ceiling), vertical or horizontal with wooden pattern in between with a ratio of ( 70% Gypsun ceiling -30% wooden ) up to any height above floor level, including fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive). Consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts. Other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size. The other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre. This shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval and reinforced with rabbit wire mesh of 100mmx16mm gauge fixed to frame.

Provding/fixing of Khatambandi Ceiling (Panch murba of ist Class Budloo Wood) of specified pattern in ceilings etc. including, necessary frame work work of 50 mmx 75mm size and other incidentals including cornice of size 3” x 3” of Budloo Wood and 12mm thick ply board frame in lining of Budloo wood underneath all complete in all respectes.as per the directions of Consultant/as per the drawings enclosed

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with Armourcrete of M/s The Structural Water Proofing Company Pvt. Ltd. Or Tapecrete of M/s CICO Technologies Ltd. consisting of applying : First layer of slurry of cement @ 0.488 kg/Sqm mixed with Armourcrete or Tapecrete @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/Sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes supply of waterproofing compound, preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry)

Providing and fixing ornamental eves boarding (300mm x 40mm ) first class kal wood fixed with screws etc, including all carraiges .All job completed

P/F of 20 mm thick T&G well planned planks for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and put up in position of Budloo wood (Ceiling Joists) which shall be paid for separately, including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete job. all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). (soffits of Ist Class Kail Wood).as per the directions of Consultant/as per the drawings enclosed

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.60mm thick with zinc coating not less than 350gm/m2

Providing and fixing Track deck CRILL make or equivalent H.I. rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 255 mm T.C.T(total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 no stiffing ribs,

Providing and Fixing 75x 60mm moulded /ornamental hand rails in straight lengths /Curved in shape where required and approved by consultant completes for stair cases/ Verandas etc. including all necessary fittings / Fixtures (Ist class deodar wood) as per the directions of Consultant/as per the drawings enclosed

Providing and fixing moulded /ornamental balusters square, or circular wrought, fixed with ends, housed (square or splay) to hand rails and treads or strings, as approved by consultant completes (75mm nominal dia and 750 mm long)including all necessary fittings / Fixtures (Ist class deodar wood) as per the directions of Consultant/as per the drawings enclosed

Providing and fixing moulded /ornamental Newel posts wrought, fixed with ends, housed (square or splay) to hand rails and treads or strings, completes (100 mm nominal dia and 1000 mm long) with turned caps/pendants fixed on top as per directions including all necessary fittings / Fixtures (Ist class deodar wood) as per the directions of Consultant/as per the drawings enclosed

Providing and fixing ornamental wooden grill (pinjra work) with necessary grooves and chamfer fixed with screws etc, including all carraiges .All job completed

Pointing on brick masonry in lime Surkhi (I Lime: 2 Surkhi ) including finishing the joints with lime surkhi pigments to give a local heritage touch as per the directions of Engineer incharge upto desired height complete in all respects. (Including all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge.

Providing and fixing Almirah 750 mm high x 600 mm deep(min) made up of 19 mm thick ply board for frames, shelves and 12 mm thick ply board for drawers with 19 mm thick ply board shutters finished top with dulmica 0.80 mm thick on exposed surfaces fixed with adhesive/screws/nails wherever required including inside painting on exposed surfaces including telescopic channels ,drawer knobs locks and all necessary fittings of Ist Quality as required all complete as per the directions /instructions of Engineer in charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 4/6 litre low level white flushing cistern, including flush pipe, with manually controlled device with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Makes:-Jaquar/Hindware/Cera Ref: Hindware Cat. No. 92047 Star Rated/Jaquar Cat No. CNS WHT 851)/Cera S1013104 Including PP Seat Cover with hinges Fixing Accessories,Cistern Fittings etc.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 MM SAND cast iron P or S Trap,10 liter low levelwhite P.V.C Flushing Cistern,including flush pipe,with manually controlled device(handle Lever),with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:ECSWHT451&WHCWHT184)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin With Fixing Accessories Set (JaquarURS WHT 13255,SNRCHR51097)

Providing and fixing Urinal Partition/Division Plate (Jaquar 1810US or UC)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass Centre Hole Basin Mixer(01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), Pedestal (01 Nos) including painting of fittings and brackets, cutting and making good the walls wherever required. Makes:-Jaquar/Hindware/Cera Ref: Hindware Cat No. 10103 Wash Basin,11032 (Pedestal), 280010SCP (Basin Mixer), 850001(Waste Coupling))/ Jaquar Cat No. FNS-WHT-40801, FNS-WHT-40301 (Pedestal), CON167KNB (Basin Mixer), ALD 705 (Waste Coupling) /Cera S2040104 (Wash Basin), S2090101 (Pedestal), F2002461 (Basin Mixer), F8050101 (Waste Coupling)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510X1040MM BOWL DEPTH 250MM

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing toilet paper holder with Flap made out of C.P Brass Makes: Jaquar/ Hindware/ Cera Ref: Hindware Cat No. F880003/ Jaquar( ACN 1153N)/Cera F5007110

Providing and fixing C.P Brass Soap Dish. Makes: Jaquar/ Hindware /Cera Ref:Hindware Cat No. F880011)/F5003106,Jaquar 1131

Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality Makes:- Jaquar/ Hindware/ Cera Ref: Hindware Cat No. F160023 /Jaquar (ALD563)/ Cera F8030101

Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws Makes:- Jaquar /Hindware /Cera Ref: Hindware Cat No. F880005/Jaquar(ACN 1111NM)/Cera F5003103

Providing and fixing C.P brass bib cock with Auto closing System with Built in control Cock with Wall Flange of approved quality Makes:- Hindware/Jaquar/Cera Ref: Hindware Cat No. F310002 ACP/Jaquar(PRS 043)/Cera F9020151

15 mm nominal bore Providing and fixing C.P. brass angle valve for basin mixer and geyser/cisterns points. Makes:- Hindware/ Jaquar/ Cera Ref: Hindware Cat No. F280004/ Jaquar (CON 053) /Cera F2002201

15 mm nominal bore Providing and fixing C.P. brass Single Lever Basin Mixer with 450 mm braided connection pipe. Makes:- Hindware/ Jaquar /Cera

15 mm nominal bore Providing and fixing C.P. brass bottle trap for wash basin including CP waste fittings complete 32 mm dia complete in all respect of approved quality. Makes: Jaquar/ Hindware/ Cera Ref: Hindware Cat No. F850072 /Jaquar(ALD 769L 250x190)/ Cera F8060301

Providing and fixing C.P. brass Wall Mixer Makes:- Hindware/ Jaquar/ Cera Ref: Hindware /Jaquar /Cera

Providing and fixing PP Based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.

110 mm dia. PP SWR socketed pipe with rubber ring joints .

75 mm dia. PP SWR socketed pipe with rubber ring joints .

160 mm dia. PP SWR socketed pipe with rubber ring joints.

Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required.Makes:- Astral/SFMC/Finolex

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.

Concealed work, including cutting chases and making good the walls etc.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work (Exposed on wall)

2532 (32 mm OD) pipe

4050(50 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. External work

4050 (50 mm OD ) pipe

Providing and Fixing of Thermal Insulation for Hot Water Lines made out of Flexible Elastomeric Foam of Closed Cells Structure Having a Thermal Conductivity of 0.038 W/m.K at 200 Deg C water Vapour Permeability of Cu.m 5000 as Required including accessories i.e Adhesives/Tape on all Joints as per the satisfaction of the Engineers Incharge.

1620 (20 mm OD) pipe

Providing and fixing unplasticised PVC connection pipe with brass unions:

45 cm length

15 mm nominal bore

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks

Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m(For All Kinds of Soil)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

Providing and fixing PP Based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions, clean out plug, cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing for Under Ground Sewage System in the Existing Excavated Trench. Makes:-Astral/ SFMC /Finolex

110 mm dia. PP SWR socketed pipe with rubber ring joints .

160 mm dia. PP SWR socketed pipe with rubber ring joints.

Providing and filling sand of grading zone V or coarser grade all-round the Composite Pipes in external work & lay dry brick over sand layer to protect the pipe.

110 mm dia. PP SWR socketed pipe with rubber ring joints .

160 mm dia. PP SWR socketed pipe with rubber ring joints.

Supply, Installation of PVC Gully Trap of Size 110 mm Makes:-Astral /SFMC /Finolex

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design.

With F.P.S. bricks : Constructing septic tank, of size 5.0mx2.5mx1.4m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole (1.5 m water depth) , in B/W, 350/230 mm thick ( minimum) walls and 400 mm

Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. Makes:-Neu/Honeywell

50 mm Diameter

32 mm Diameter

25 mm Diameter

Providing and fixing on wall 25 LTRS Electric Geyser with ABS Body. Makes:- Bajaj/Crompton/Jaquar/Hindware

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

2000 LTRS capacity each

M/S MUZAFFAR AHMAD RATHER