Development of Ambhora Tourisam place in which included tourist facility, temple development and beautification work.

Amount

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper.

Ground Floor

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.

Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Fourth Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor & Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor & Terrace Floor

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Ground Floor

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Ground Floor

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Ground Floor

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Ground Floor

First Floor

Second Floor

Terrace Floor

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Ground Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Ground Floor

First Floor & Terrace Floor

Second Floor

Terrace Floor

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

Ground Floor

First Floor & Terrace Floor

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Ground Floor

First Floor & Terrace Floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Ground Floor

First Floor & Terrace Floor

Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).

Ground Floor

First Floor & Terrace Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge.

Ground Floor

First Floor & Terrace Floor

Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand.

Ground Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Ground Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Ground Floor

First Floor

Second Floor

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Ground Floor

First Floor & Terrace Floor

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Ground Floor

First Floor & Terrace Floor

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

Ground Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

First Floor & Terrace Floor

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.

First Floor & Terrace Floor

Providing & fixing factory-made steel door of Single leaf External Embossed Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mm size, Eye hole, Door stopper complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Ground Floor

First Floor & Terrace Floor

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)

First Floor & Terrace Floor

Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kilogram/One Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete

Ground Floor

First Floor & Terrace Floor

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Ground Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

Ground Floor

First Floor & Terrace Floor

Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Ground Floor

Providing and fixing of factory made UPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1) Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2) Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3) Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4) Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5) Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6) Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7) Surface Spread of flame BS : 476 - Part 7 Classification 1 8) Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9) Tensile modulus ASTM D 638 Shall not be < 35 MPa 10) Shear Modulus ASTM D 732 Shall not be < 220 MPa 11) Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of window) (Big Series) Window frame of size 122 x 54 mm & Sash of size 64 x 47 mm.

Ground Floor

First Floor & Terrace Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing 25mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Ground Floor

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Ground Floor

Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge.

First Floor & Terrace Floor

Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )

First Floor & Terrace Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc. complete.

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight with 75 mm thick R.C.C. cover medium duty 140Kilogrametc. complete.

Ground Floor

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.

Ground Floor

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

First Floor & Terrace Floor

Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

First Floor & Terrace Floor

Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

First Floor & Terrace Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

First Floor & Terrace Floor

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Ground Floor

First Floor & Terrace Floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

First Floor & Terrace Floor

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

First Floor & Terrace Floor

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.

First Floor & Terrace Floor

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.

First Floor & Terrace Floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

First Floor & Terrace Floor

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)

First Floor & Terrace Floor

Ground Floor

Ground Floor

Ground Floor

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Ground Floor

Providing and laying in trenches 40mm dai. uPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary )

Ground Floor

Providing Water proofing treatment to newly laid fully cured concrete slab of terraces by applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make and Cement in 1 : 2 proportion ( 1 litre polymer : 2 Kg. Cement) to a neatly cleaned and dust free concrete surface and upto 300 mm. over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover water proof plaster 20 mm thick after sufficient curing apply IPS 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound of approved make and polypropylene fibres @ 125 gm per bag of cement making groovr 3 to 4 mm wide & 10 mm deep in concrete, in pannels of 3m/4m or as per site condition & filling the joints with poly sulphide sealant after curing including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry, as directed and ponding the surface as directed etc.complete ; covering 10 years guarantee against leakproofness on court Fee stamp paper of Rs 100/-

Ground Floor

First Floor

Terrace Floor

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

First Floor & Terrace Floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Ground Floor

First Floor & Terrace Floor

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.

Ground Floor

First Floor

Second Floor

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

Ground Floor

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Ground Floor

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)

Ground Floor

First Floor & Terrace Floor

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Ground Floor

Transportation of material obtained from debris of various sorts excavated stuff including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. ( Beyond 3.0 Km. ) (For All Other Minerals)

Ground Floor

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 mm thick of 1200mm (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineer in charge. Colour: As per approval The 16mm thick panels shall be used for a roofing height of upto 15 mtrs.

Ground Floor

First Floor & Terrace Floor

Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )as per drawing.

First Floor & Terrace Floor

Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate.

First Floor & Terrace Floor

Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

First Floor & Terrace Floor

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

First Floor & Terrace Floor

Providing and fixing pedestal (single piece ) in red sand stone in male - female joinery, with grooves and mouldings to be fixed with adhesive, cement slurry, brass pinning and applying anti-moss treatement as per drawing, design and the direction of the site engineer/ consultant including transportation, loading, unloading, stacking, scaffolding, cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinery, placing, etc. complete. (prior aproval of sample/ brand by Ex. Engineer is necessary before use ) spec. no. : as directed by engineer in -charge. (pedestal - red sand stone) from:- finished size = ( 0.450 x 0.450 x 0.290 m)

Ground Floor

First Floor & Terrace Floor

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN RED SAND STONE WITH MACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EX. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M

Ground Floor

First Floor & Terrace Floor

PROVIDING AND FIXING CAPITAL ( ONE PIECE ) IN RED SANDSTONE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EX. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( MIDDEL CAPITAL - RED SANDSTONE I) FROM: FINISHED SIZE = ( 0.500 X 0.500X 0.200 ) (pedestal - red sand stone) from:- finished size = ( 0.450 x 0.450 x 0.290 m)

Ground Floor

First Floor & Terrace Floor

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN RED SAND STONE CARVING AND WITH MACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EX. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M

Ground Floor

First Floor

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) a) Upto 1.50m lift Normal Rate

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) b) 1.50m to 3.00m lift, Add 10%

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing and laying in situ / ready mix M-20 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) etc. complete. (excluding reinforcement). a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) .

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA

Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications ( VSI sand finely washed etc )

Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 800mm diameter in proper line, level and slope etc. complete.

Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and fixing 50mm thk plain cladding in sand stone in male - female joinery with grooves and mouldings as per drawing, design and the direction of the site engineer/ consultant, to be fixed on m.s. structural framework with mechanical fixing, adhesive or cement slurry or brass pinning, applying anti-moss treatement including transportation, loading, unloading, stacking, scaffolding, cleaning , fixing, joint filling, polishing, grinding, necessary lifting machinary, etc. complete.

PROVIDING AND FIXING RAILING WITH BALUSTREDS (600MM LONG) & HAND RAIL (250MM WIDE X 0.150M DEEP) IN RED SAND STONE AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) INCLUDING ALL NECESSORY BRASS FITTINGS & OTHER FITTINGS, TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EX. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (RAILING WITH BALUSTREDS & HAND RAIL - WHITE RAJNAGARMARBLE)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.185wide X 0.300 Ht. )

PROVIDING AND FIXING CAPITAL OVER COMPOUND WALL (0.330M X 0.330M X 0.225) m IN RED SAND STONE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. CAPITAL OVER COMPOUND WALL FINISH SIZE (0.330M X 0.330M X 0.225) m

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.185wide X 0.300 Ht. )

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate)

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with R.C.C. M 20 Grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete. Spec: MORT and H 2013 Cl 811 Page No 360

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meterr made out of 4mm aluminum composite material bonded with white retro reflective sheeting of Class C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mm made out of 1.5mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete.

Supplying & Laying of Granite Cobble Stone: laying Granite Cobblestone on WBM Base including GSB, 80mm Grade-I, 40mm Grade-II

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

GARDEN SOIL:-Supplying on site garden soil well sieved80 % to pass through I.S. sieve of 10 mm size free fromstones rubbish like dried grass roots and other such materials.The soil should be fresh from quarry. The color of the soilgenerally is red. The soil will be measured by measuring box(Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 25 km. considered Excluding royalty.)

FARM YARD MANURE:-Supplying on site well decayed,well dried, well powdered, without clods and free from stones,dried grass and other rubbish material. The color of themanure generally is black. The manure will be measured bymeasuring box.(Farma) Item includes Transporting, loading -unloading etc (.Leadcharges per 20 km. considered.)

Mixing garden soil/silt &manure thoroughly well, watering previous night. Planting required plant species; lawn grass as directed etc. complete. (1/10 of unskilled labour i.e 648/10 + Including (Overhead Charges 10% & Contractor Profit 10% ) ( Labour Rates For PWD SSR 2022-23 / Sr. No. 62 Page no.-545 )

Spreading fresh garden soil /silt & manure in excavated area including lead up to a distance of 50 Mtrs (Rates Form PWD SSR 2022-23 / Sr. No. -104 Item No-2.30 Page no.-25 )

Supply of Supari Palm in 15" X 16" Bag size with 5 to 7 feet ht, Palm should be well Developed, Good Branching, healthy Condition, appropriate Size in Polybag, undamaged.

Supply of Floribunda, Polyantha & Miniature different varitey of 10" X 12" Bag size with 30 to 40cm ht, Roses are Healthy, well grown, Fresh, free from Pest and Diseses, No any Damage at site.

Supply of Ixora Mini of 8" X 10" Bag size with 30 to 40cm ht, Flowering Shrubs must be Healthy, well grown, Fresh, free from Pest and Diseses, No any Damage at site.

Supply of Allamanda of 10" X 10" Bag size with 15 to 30 ht, Flowering Shrubs must be Healthy, well grown, Fresh, free from Pest and Diseses, No any Damage at site.

Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.

PROVIDING & FIXING IN POSTION SANDSTONE MADE STONE BENCHES OF SIZE 2M X 0.6M AS PER DETAILED DRAWING & AS DIRECTED BY EBGINEER IN CHARGE

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor & Terrace Floor

Second Floor

Third Floor

Fourth Floor

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Ground Floor

First Floor

Second Floor

Terrace Floor

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Ground Floor

First Floor

Second Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Ground Floor

Providing and applying a base coat comprising of 1 Kilogram Polydee-MC and 1 Kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Anti bacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Ground Floor

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Ground Floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Ground Floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Ground Floor

Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Drilling of Bore well by reverse rotary method in all types of strata 400 including all charges ---------- etc. complete.

Ground Floor

Providing and fixing 150 mm dia M.S. casing pipe class B 4.80 mm thick as per IS 1239 (Blank)

Ground Floor

Yeild test by Air lift Metod with 90 cone "V" notch.as directed

Ground Floor

Testing Charges For Borewell Point Ground Floor

Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67% Water absorption (as per ASTM):-0.30% Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mm Bacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below l) Up to 500 user size (6mx2.0mx1.6m), Capacity of Biodigester:-20000 liters, Area of top, bottom and side walls: - 50.72 sq.m, Area of partition walls: 13.36sq.m, Total weight of FRP: - 917.86 Kilogram, Bacteria inoculums quantity: - 7000 liters, Minimum thickness of side walls / top and bottom: 9 mm, One Number of inside partitions: - 4, Minimum thickness of partition wall: 4mm

Ground Floor

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)

Ground Floor

Removing Queen Post truss from roof and stacking the materials as directed with all leads and lifts etc. complets

Ground Floor

Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.

Ground Floor

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Ground Floor

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.

Ground Floor

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Ground Floor

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Ground Floor

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Ground Floor

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.

Ground Floor

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Ground Floor

Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete.

Ground Floor

Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.

Ground Floor

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Ground Floor

Removing purlins from roof including stacking as directed with all leads , lifts etc. complete.

Ground Floor

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete

Ground Floor

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.

Ground Floor

Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Ground Floor

Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etc. complete.

Ground Floor

Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).

Ground Floor

First Floor

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

Ground Floor

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Ground Floor

Providing and fixing Hand Shower (Health Faucet) with 8mm dia 1m long flexible tube having wall hook with approved make including necessary sockets / union nut etc complete as directed by engineer in charge

Ground Floor

Providing and fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete.

Ground Floor

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.

Ground Floor

Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make or equivalent including all fixtures, fittings etc. complete.

Ground Floor

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make.

Ground Floor

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete.

Ground Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

Ground Floor

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Ground Floor

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Ground Floor

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Ground Floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Ground Floor

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete.

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)

Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Ground Floor

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Ground Floor

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Ground Floor

Providing and fixing mild steel grill railing weighing 20Kilogram/ One Square Metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. One Number : As directed by Engineer in charge.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material

Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade,

Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 900mm diameter in proper line, level and slope etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1000mm diameter in proper line, level and slope etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1200mm diameter in proper line, level and slope etc. complete.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground Floor

First Floor

Second Floor

Terrace Floor

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item One Number 7 to 4 prior approval of Superintending Engineer will be necessary

Ground Floor

First Floor

Second Floor

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Ground Floor

First Floor

Second Floor

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Ground Floor

First Floor

Second Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete.

Ground Floor

First Floor

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.

Ground Floor

First Floor

Second Floor

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per

Ground Floor

First Floor

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Ground Floor

Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc

Ground Floor

Terrace Floor

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. a) With colour anodizing Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered.

Ground Floor

First Floor

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 Kilogram)

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.

Ground Floor

First Floor

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat

Ground Floor

First Floor

Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Ground Floor

First Floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter

Ground Floor

First Floor

Second Floor

Providing and fixing of factory made UPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. 2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 mm

Ground Floor

First Floor

Providing cast in situ / ready mix M35 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 3.0m to 4.5m) By Mechanical Means

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meterr made out of mm aluminum sheet bonded with white retro reflective sheeting of Class ( Type IV High intensity micro- prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing mild steel framework with design of cast iron grill for compound wall grill (weight of grill = 64.58 kg/sqm) as per detailed drawing & design including all fixtures necessary, welding, transportation, loading / unloading with crane, painting with one coat of anti-corrosive primer and two coats of oil painting, etc complete. as approved by engineer/consultant in charge

TENSILE FABRIC ROOF CANOPY :Design, supply, fabrication, delivery and erection of tensile fabric roofing including steel support framework of make Tata, Jindal or similar wire, ropes, cables chemical fasteners, shackles, rigging screws, clamps, tensioning hardware and final finishing with enamel paint etc complete including cost of materials, labours (Foundation work to be paid seperately) Membrane specifications as under both side PVDF cost technical properties (5% veriation acceptable) yarn: PES HT 1100 dtex Weight 950gm/sqm-28oz sqyd. Total thickness: 0.72mm width:267cm, 105.1 inch. Tensile strength: 420/400 daN/SCM (WRAP WEFT) Adhesion:12daN/SCM Surface treatment: Formula weldable fluorinated varnish, light transmission:13.50% flame retardency: MZ NFP92-507CSFMT119, B1/DIN4102 magyfactures Guarante 7 years

Providing and supplying Onduvilla tiles of size 1070 mm x 400 mm and 3mm thick with including all necessary fixture and fastening such as speedy screw of dia 4.2 mm length 65 mm and water tight screw as per drawing , etc. (excluding framework and GST.)

Providing and supplying Onduvilla ridge and hip tile of size A90 900mm x 420 mm and 3 mm thick including clams nuts, bolts screw, etc.

Providing and fixing cobble stone of size 60 mm thk of approved size and shape asspecified including transportation of blocks to worksite including loading, unloading and stacking as directed, laying cobble stone blocks in position over prepared bed of sand of 50 mm thickness with all necessary excavation in all stratas, spreading blindge of fine sand/ metal dust over the prepared bed, compacting blocks etc. complete & including transportation stacking, loading unloading etc complete. (Prior approval of sample by Consultant / Engineer in charge is necessary before use) spec.no.: as directed by engineer in-charge.

Providing and fixing FRP WAVE SLIDE single slide with stairs and rail for child safety as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing FRP SPIRAL SLIDE Single Spiral Slide as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Play ground multiplay: size-13*24 ft wit a set of 3 slides of different types as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing FRP Slide 12 ft. ht. - Single Straight Slide as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Big fun multiplay station (10*6 mtr )with a set of multiple activities which inclues swings, wall climber as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Play ground multiplay station: 14 6 mtr in size with a capacity of catering 8-10 children at a time as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Delux MS,PVC Spider Web Net Climber SIZE 16 x 14 x 12 FT ideal for age group -6- 15 years as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing SPIDER NET CLIMBER, OUTDOOR - The Spider Web Climber is a unique net climber which features a spider web pattern, rather that the ordinary grid style found on most net climbers tied around ms frame as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing CARGO Net ROPE CLIMB max height 3 m as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Kids Climber low height climber set of 1 or more slide as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing Jungle Jim Climber as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing HANGING MGR - Age group 3 to 12 Years, Capacity:- 4 Children Diameter:- 6 feet Height:- 12feet Center Pipe:- 2 inch MS pipe as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing STANDING MGR dia-4 ft,height-3 ft, capacity 4 children as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing GLOBE CLIMBER as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing RING CLIMBER ARCH SHAPED as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing SNAKE CLIMBER - 20X6X10 FEET as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing CIRCLE CLIMBER as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing FOUR SEATER SPEED SEA - SAW Product Height - 1.2 Mtr as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing SPECIAL DOUBLE ARCH SWING as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing TRIPLE ARCH SWING as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

Providing and fixing DISC SWING This accessible feature offers collaborative swinging fun for up to 4 users. With a seat diameter of 45" the Disc Swing is made of UV-stabilized roto-molded plastic and includes a soft rubber safety bumper on two sides. The Disc hangs from 8' arch uprights with a double powder coated baked-on finish available in a wide array of vibrant colors. as specified including loding, unloding and stacking complete. (prior approval of sample by consultant/ Engineer in charge is necessary before use)

SUPPLYING & FIXING 75MM THICK SANDSTONE BENCH FOR GARDEN AREA HAVING TOP SIZE 2M X 0.6M AND HEIGHT 0.45M FROM FINISH LEVEL (AS PER IMAGE/DRAWING SHOWN) BENCH IS IN GRANITE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER INCHARGE IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (BENCH :-L-2 X W-0.6 X H- .45m ) (Pedestal:- L-0.45X W-0.45 X H- .45m ) (Slab:- Thickness 75mm

PROVIDING AND FIXING FOUNTAIN IN WHITE MAKRANA OR EQUIVALENT MARBLE OF HEIGHT 1.25 M , SIZE AND SHAPE AS PER APPROVED DRAWING, INCLUDING CARVING WORKS ,GROOVES AND MOULDINGS OF VARIOUS DESIGN AND TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (FOUNTAIN - WHITE MAKRANA MARBLE ) with pump and coloured lightPER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (FOUNTAIN - WHITE MAKRANA MARBLE ) with pump and coloured light

SCULPTURE Providing and fixing stone/METAL sculptures of height 3-4 ft. design and make as approved by Architect/Engineer in charge

Excavation for Instant Lawn and Shruberry - Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 20 cms.(Garden work item No.- 5, Pg 11)

Supply of garden Soil for Instant lawn and Shuberry- Supplying on site fresh Garden soil (i. e. 3 part soil )(free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20 cms ( consolidated thickness). Quantity of soil 0.174 cum x 800 /cum =139.20/-( Garden work item No.- 38a, Pg 13)

Supply of Garden soil for flowering/ shady trees- Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 1 x 1 x 1m ( consolidated thickness).Quantity of soil 0.653 cum x 800/cum = 522.40/- ( Garden work item No.- 45a, Pg 14)

Supply of FYM for Instant lawn and Shruberry-Supplying on site well decomposed Farm Yard Manure (i. e. 1 part FYM) for excavation area of depth of 20 cms ( consolidated thickness).Quantity of FYM 0.054cum x 950/cum = 51.30/-(Rate Garden work item No.- 38b, Pg 13)

Supply of FYM Flowering/ shady trees-Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 1 x 1 x 1m. ( consolidated thickness).Quantity of FYM 0.202 cum x 950/cum = 191.90/-( Garden work item No.- 45b, Pg 14)

1-Aralia, 13" x 13", 30cm to 60 cm (Plant Rate, 2(b)-3, Pg 18)

2- Plumeria Alba, 18" x 18" 240cm to 270 cm. (Plant Rate, 1(b)-29, Pg 17)

3- Plumeria Rubra, 18" x 18" 240cm to 270 cm.(Plant Rate, 1(b)-30, Pg 17)

4- Hibiscus, 8" x 10" 45 cm to 60 cm.(Plant Rate, 1(b)-7, Pg 16)

5- Asparagus, 7" x 8" 20 cm to 30 cm.(Plant Rate, 2(a)-4, Pg 17)

6- Dieffenbachia, 13" x 13" 30 cm to 45 cm.(Plant Rate, 2(a)-9, Pg 17)

9- Ficus Benjamin, 13" x 13" 60 cm to 90 cm.(Plant Rate, 2(b)-13, Pg 19)

10- Ficus Blackena, 13" x 13" 45 cm to 60 cm.(Plant Rate, 2(b)-14, Pg 19)

11- Heliconia any type, 18" x 18" 60 cm to 75 cm.(Plant Rate, 1(b)-28, Pg 17)

12- Mussaenda, 9" x 11" 20 cm to 45 cm.(Plant Rate, 1(b)-16, Pg 16)

13- Thunder Lily, 5''x 6'' 10 cm to 20 cm(Plant Rate, 8 -11, Pg 27)

14- Bougaville Glabra, 13'' x 13'' 60 cm to 75 cm.(Plant Rate, 7(d)-3, Pg 26)

15- Bougaville SP Singh, 18'' x 18'' 60 cm to 75 cm.(Plant Rate, 7(d)-1, Pg 26)

16- Cycas, 18" x 18" 90 cm to 120 cm.(Plant Rate, 2(b)-7, Pg 18)

17- Ribbon Grass, 7" x 8" 10 to 20 cm(Plant Rate, 8 -10, Pg 27)

18- Lily, 7'' x 8'', 30 cm to 45 cm(Plant Rate, 4 -7, Pg 20)

19- Canna Dwarf, 7'' x 8'', 30 cm to 40 cm(Plant Rate, 4 -3, Pg 20)

20- Floribunda diff. Variety, 7''x 8'' 20 cm to 30 cm(Plant Rate, 13(a)-2, Pg 34)

1-Bahva, Amaltash 21" x 21", above 10' feet(Plant Rate, 5(d)-1, Pg 22)

2-Tabebuia, 21" x 21" above 10 ft.(Plant Rate, 5(d)-7, Pg 22)

3- Largesstroemea , 18''x18'', 8ft to 10ft(Plant Rate, 5(c)-7, Pg 22)

4- Bottle brush , 18''x18'', 8ft to 10ft(Plant Rate, 5(c)-3, Pg 22)

5- Kadamb , 18''x18'', 8ft to 10ft(Plant Rate, 5(c)-5, Pg 22)

6- Spathodia , 18''x18'', 8ft to 10ft(Plant Rate, 5(c)-12, Pg 22)

8- Raphis, 18''x18'' 5 ft to 7ft(Plant Rate, 11(d)-4, Pg 33)

Filling Garden Soil and FYM for Instant lawn and Shruberry - Filling fresh garden soil / silt & manure in excavated area of depth 20cms. (Garden work item No.-15, Pg 12 )

Filling Garden Soil and FYM for flowering/ shady trees, Filling fresh garden soil / silt & manure in excavated pit size area - 1m x1mx1m (Garden work item No.- 22, Pg 12)

Mixing and Planting for Instant Lawn and Shruberry-Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover.(Garden work item No.- 23, Pg 12)

Mixing and planting for flowering/ shady trees-Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 1.00 x 1.00 x 1.00m.(Garden work item No.- 27, Pg 12)

PROVIDING AND FIXING 50 MM THK CLADDING IN SAND STONE BEAM SIDE SOFFITS AND COLUMN , WALLS WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PLAINCLADDING - 50 MM THK - RED SAND STONE )

PROVIDING AND FIXING RED SANDSTONE BLOCK MASONARY WALL OF REQUIRED SIZE AND SHAPE WITH ALL EDGES ARE MACHINE CUT WITH V-GROOVING OF 6MM ON ALL EDGES INCLUDING CUTTING, DRESSING, POLISHING, GRINDING AS PER THE DETAILED DRAWINGS PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT, LOADING, UNLOADING, INSTALLATION, WITH HYDRA CRANE OR SIMILAR EQUIPMENTS, FIXING, APPLYING ANTI-MOSS TREATMENT ON SURFACES OF STONE WITH SPECIFIED CHEMICALS AS APPROVED BY THE ENGINEER-INCHARGE, ETC. COMPLETE(EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING PEDESTAL ( SINGLE PIECE ) IN RED SAND STONE WITH CARVIN ON FOUR SIDE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PEDESTAL - RED SAND STONE) FROM: FINISHED SIZE = ( 0.400 X 0.400 X 0.465MM)

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN RED SAND STONE WITH CARVIN ON FOUR SIDE WITH MACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M HEIGHT 0.773)

PROVIDING AND FIXING MIDDEL CAPITAL ( ONE PIECE ) IN RED SANDSTONE WITH CARVING ON FOUR SIDE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( MIDDEL CAPITAL - RED SANDSTONE I) FROM: FINISHED SIZE = ( 0.600 X 0.600X 0.525 )

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN RED SAND STONE WITH CARVING ON FOUR SIDEMACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M HEIGHT (0.800MM)

PROVIDING AND FIXING TOP CAPITAL ( ONE PIECE ) IN RED SANDSTONE WITH CARVING ON FOUR SIDE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( MIDDEL CAPITAL - RED SANDSTONE I) FROM: FINISHED SIZE = ( 0.450 X 0.450X 0.200 )

PROVIDING AND FIXING RED SAND STONE ARCH OF THICKNES 0.20 M ( IN TWO PIECE ) WITH CARVING IN BOTH FACES IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( ARCH WITH CARVING IN BOTH FACES THICKNES 0.200 MM - RED SAND STONE

PROVIDING AND FIXING 50 MM THK PLAIN PANELS OF WHITE RAJNAGAR OR EQUIVALENT MARBLE FOR SLAB BOTTOM (CELING), BEAM SIDE SOFFITS AND COLUMN FACE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PLAIN PANEL - 50 MM THK - WHITE RAJNAGARMARBLE )

PROVIDING AND FIXING DECORATIVE PANELS "C" SHAPE PANEL (50MM THK) WITH CARVING IN WHITE RAJNAGAR OR EQUIVALENT MARBLE FOR ARCH FACIA, SLAB BOTTOM (CEILING), COLUMN AND BEAM FACE WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING ETC.. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( DECORATIVE PANEL WITH CARVING - WHITE RAJNAGARMARBLE ) - 50MM THK

PROVIDING AND FIXING DECORATIVE PANELS WITH CARVING MAIN BEAM (50MM THK ) C -SHAPED IN WHITE RAJNAGAR OR EQUIVALENT MARBLE BLOCK FOR BEAM SOFFIT, WITH CARVING OF MOTIF, MURALS, FLORAL EMBOSSING ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (DECORATIVE PANELS WITH CARVING - WHITE RAJNAGAR MARBLE (50MM THK) - C SHAPE

PROVIDING AND FIXING DECORATIVE PANELS WITH CARVING COFFER BEAM (50MM THK ) C-SHAPED COFFER BEAM IN WHITE RAJNAGAR OR EQUIVALENT MARBLE BLOCK FOR BEAM SOFFIT, WITH CARVING OF MOTIF, MURALS, FLORAL EMBOSSING ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (DECORATIVE PANELS WITH CARVING - WHITE RAJNAGAR MARBLE (50MM THK) - "C" SHAPED COFFER BEAM)

PROVIDING AND FIXING DECORATIVE PANELS WITH CARVING (50MM THK ) IN WHITE RAJNAGAR OR EQUIVALENT MARBLE BLOCK FOR SLAB BOTTOM SOFFIT, WITH CARVING OF MOTIF, MURALS, FLORAL EMBOSSING ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (DECORATIVE PANELS WITH CARVING - WHITE RAJNAGAR MARBLE (50MM THK)

PROVIDING AND FIXING INLAY WORK OF SEMI PRECIOUS STONES (850 GMS/SQ.M) SUCH AS LAPIS LAZULI, GREEN PAYZER, EMERALD GREEN, MALACHITE, TIGER EYE, MOP (MOTHER OF PEARL) ONYX, ETC. IN CALIGRAPHY, FLORAL, GEOMETRICAL SHAPES ON ALREADY PROVIDED WHITE RAJNAGAR OR EQUIVALENT MARBLE ON THE SURFACE OF CEILING, FLOORING, COLUMN FACIA ETC. TO BE FIXED WITH MECHANICAL/ CHEMICAL [ NEUTRAL COLORED SILICON (MADE IN GERMANY) ] OR BOTH ANCHORAGE AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (4 to 6 MM thick) (INLAY OF SEMI PRECIOUS STONES - (EXCLUDING COST OF BASE MATERIAL )

PROVIDING AND LAYING PLAIN FLOORING (SIZE=1.80X 0.90 M & 37.5MM THK) IN WHITE RAJNAGAR OR EQUIVALENT MARBLE OF APPROVED QUALITY, VEIN AND COLOUR WITH MACHINE POLISH SURFACE FOR FLOORING IN REQUIRED PATTERN ON BED OF C.M. 1:6 AND FIXED WITH CEMENT SLURRY AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING, WHITE CEMENT, FIXING, JOINT FILLING, MIRROR POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (FLOORING - WHITE RAJNAGARMARBLE ) - 37.5MM THK

PROVIDING AND FIXING FLOORING ON TREADS AND RISER (37.5MM THK) IN WHITE RAJNAGARMARBLE WITH RED SAND STONE IN COMBINATION AS PER DRAWING & DESIGN WITH MATCHING VEIN AND COLOUR, MACHINE POLISHED SURFACE, ON A BED OF C.M. 1:4 INCLUDING NEAT CEMENT FLOAT, FILLING JOINTS WITH COLOURED CEMENT SLURRY TO MATCH THE COLOUR OF SLABS, WHITE CEMENT, CURING, MIRROR POLISHING, SAND BLASTING, CLEANING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( FLOORING ON TREADS AND RISER IN WHITE RAJNAGARMARBLE WITH - ( 37.5 MM THK )

PROVIDING AND FIXING BRASS INLAY (6MM THK X 18MM DEEP) WORK IN FLOORING ON ALREADY PROVIDED WHITE RAJNAGAR OR EQUIVALENT MARBLE, TO BE FIXED WITH MECHANICAL/ CHEMICAL OR BOTH ANCHORAGE ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING, WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (BRASS INLAY WORK - EXCLUDING COST OF BASE MATERIAL )

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.485 wide X 0.5500 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (00.485 wide X 0.200 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.675XHEIGHT 0.600MM) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.525 wide X 0.600 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.552X0.45 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING RED SAND STONR WITH MOULDING OF SHIKKHAR HIGHT FROM 5M TO 12M -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -WHITE RAJNAGAR

PROVIDING AND FIXING RED SAND STONE PINNACAL OVER FINISHED SHIKKHAR TOP OF HEIGHT FROM 5M TO 12M -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -

PROVIDING AND FIXING PEDESTAL ( SINGLE PIECE ) IN AGRA RED SAND STONE WITH CARVIN ON FOUR SIDE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PEDESTAL - RED SAND STONE) FROM: FINISHED SIZE = ( 0.400 X 0.400 X 0.450M)

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN AGRA RED SAND STONE WITH CARVIN ON FOUR SIDE WITH MACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M HEIGHT 1M)

PROVIDING AND FIXING MIDDEL CAPITAL ( ONE PIECE ) IN RED SANDSTONE WITH CARVING ON FOUR SIDE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( MIDDEL CAPITAL - RED SANDSTONE I) FROM: FINISHED SIZE = (0.450 X 0.450 X 0.275M)

PROVIDING AND FIXING SQUARE COLUMN ( SINGLE PIECE ) IN AGRA RED SAND STONE WITH CARVING ON FOUR SIDEMACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.3X 0.3)M HEIGHT (0.675MM)

PROVIDING AND FIXING TOP CAPITAL ( ONE PIECE ) IN RED SANDSTONE WITH CARVING ON FOUR SIDE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( MIDDEL CAPITAL - RED SANDSTONE I) FROM: FINISHED SIZE = ( 0.450 X 0.450X 0.200 )

PROVIDING AND FIXING RED SAND STONE ARCH OF THICKNES 0.20 M ( IN TWO PIECE ) WITH CARVING IN BOTH FACES IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( ARCH WITH CARVING IN BOTH FACES THICKNES 0.200 MM - RED SAND STONE

PROVIDING AND FIXING DECORATIVE PANELS WITH CARVING MAIN BEAM (50MM THK ) C -SHAPED IN WHITE RAJNAGAR OR EQUIVALENT MARBLE BLOCK FOR BEAM SOFFIT, WITH CARVING OF MOTIF, MURALS, FLORAL EMBOSSING ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (DECORATIVE PANELS WITH CARVING - WHITE RAJNAGAR MARBLE (50MM THK) - C SHAPE

PROVIDING AND FIXING DECORATIVE PANELS WITH CARVING COFFER BEAM (50MM THK ) C-SHAPED COFFER BEAM IN WHITE RAJNAGAR OR EQUIVALENT MARBLE BLOCK FOR BEAM SOFFIT, WITH CARVING OF MOTIF, MURALS, FLORAL EMBOSSING ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (DECORATIVE PANELS WITH CARVING - WHITE RAJNAGAR MARBLE (50MM THK) - "C" SHAPED COFFER BEAM)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.57M X 0.70M) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.520 X 0.200M) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.480M X 0.500M) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.600wide X 0.690 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING RED SAND STONR WITH MOULDING OF SHIKKHAR HIGHT FROM 5M TO 12M -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -WHITE RAJNAGAR

PROVIDING AND FIXING RED SAND STONR PINNACAL OVER FINISHED SHIKKHAR TOP OF HEIGHT FROM 5M TO 12M -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -

PROVIDING AND FIXING RED SANDSTONE BLOCK MASONARY WALL OF 0.600M THICK REQUIRED HEIGHT AND LENGTH WITH ALL EDGES ARE MACHINE CUT WITH V-GROOVING OF 6MM ON ALL EDGES INCLUDING CUTTING, DRESSING, POLISHING, GRINDING AS PER THE DETAILED DRAWINGS PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT, LOADING, UNLOADING, INSTALLATION, WITH HYDRA CRANE OR SIMILAR EQUIPMENTS, FIXING, APPLYING ANTI-MOSS TREATMENT ON SURFACES OF STONE WITH SPECIFIED CHEMICALS AS APPROVED BY THE ENGINEER-INCHARGE, ETC. COMPLETE(EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING COLUMN OF SIZE ( ( SINGLE PIECE ) IN MAKHRANA RAJNAGAR MARBLE WITH CARVING IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PEDESTAL - MAKHRANA RAJNAGAR MARBLE) FROM: FINISHED SIZE = ( 0.250 X 0.250 X 0.7 m)

PROVIDING AND FIXING CAPITAL OVER COMPOUND WALL (0.330M X 0.330M X 0.225) m MAKHRANA RAJNAGAR MARBLEIN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. CAPITAL OVER COMPOUND WALL FINISH SIZE (0.330M X 0.330M X 0.225) m

PROVIDING AND FIXING RAILING WITH BALUSTREDS (8 NO. 600MM LONG) & HAND RAIL (250MM WIDE X 0.150M DEEP) IN MAKHRANA RAJNAGAR MARBLE AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) INCLUDING ALL NECESSORY BRASS FITTINGS & OTHER FITTINGS, TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (RAILING WITH BALUSTREDS & HAND RAIL - WHITE RAJNAGARMARBLE)

PROVIDING AND FIXING WHITE RAJNAGAR MARBLE BEAM WITH MOULDING WITH MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.200M X 0.100M) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING RED SANDSTONE BLOCK MASONARY WALL OF 300MM THICK SIZE AND SHAPE WITH ALL EDGES ARE MACHINE CUT WITH V-GROOVING OF 6MM ON ALL EDGES INCLUDING CUTTING, DRESSING, POLISHING, GRINDING AS PER THE DETAILED DRAWINGS PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT, LOADING, UNLOADING, INSTALLATION, WITH HYDRA CRANE OR SIMILAR EQUIPMENTS, FIXING, APPLYING ANTI-MOSS TREATMENT ON SURFACES OF STONE WITH SPECIFIED CHEMICALS AS APPROVED BY THE ENGINEER-INCHARGE, ETC. COMPLETE(EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SQUARE COLUMN WITH FLAT SURFACE AT BACK ( SINGLE PIECE ) IN RED SAND STONE WITH CARVIN AND MOULDING ON FRONT SIDE WITH MACHINE, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, WHITE CEMENT, CEMENT SLURRY, BRASS PINNING ETC.. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (SQUARE COLUMN - RED SAND STONE) FROM: FINISHED SIZE = (0.170X 0.14)M HEIGHT 1.282M)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.340 DEPTH X 1M WIDE. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.34 DEPTH X 1M wide. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.340 X 0.636 MM)) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.416 X 0.187MM . ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.184 MM 0.717 MM) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING RED SAND STONE WITH MOULDING OF SHIKKHAR 0.517M X 0.577M) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -RED SAND STONE MOULDING OF SHIKKHAR 0.517M X 0.577M) -

PROVIDING AND FIXING RED SAND STONR WITH MOULDING OF SHIKKHAR (0.463M X 0.505M)-IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING -RED SAND STONE (0.463M X 0.505M)

PROVIDING AND FIXING RED SAND STONR WITH MOULDING OF SHIKKHA (0.370M X 0.574M) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING - SIZE (0.370M X 0.574M) IN RED SAND STONE

PROVIDING AND FIXING RED SAND STONE WITH MOULDING OF SHIKKHA 0.370 X 0.470M ) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING - SIZE (0.370 X 0.470M ) - IN RED SAND STONE

PROVIDING AND FIXING RED SAND STONE WITH MOULDING OF SHIKKHA (0.360M X 0.435M ) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING - SIZE (0.360M X 0.435M ) - IN RED SAND STONE

PROVIDING AND FIXING RED SAND STONE WITH MOULDING OF SHIKKHA (0.385 X 0.425M ) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING - SIZE (0.385 X 0.425M ) - IN RED SAND STONE

PROVIDING AND FIXING RED SAND STONE WITH MOULDING OF SHIKKHA (1.372 X 0.293M ) -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. BEAM WITH MOULDING - SIZE(1.372 X 0.293M ) - IN RED SAND STONE

PROVIDING AND FIXING RED SAND STONR PINNACAL OVER FINISHED SHIKKHAR TOP OF HEIGHT FROM 5M TO 9 M -IN MALE - FEMALE JOINERY AND GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.

PROVIDING AND FIXING PEDESTAL FINISHED SIZE OF (1.15 x 1.55 x 0.850M) IN FOUR PIECE, 2 PIECE OF FINISHED SIZE 2 X 1.15 x 0.27 x 0.850M AND OTHER TWO PIECE OF FINISHED SIZE IS 2 X 1.55 x 0.27 x 0.850M OF AGRA RED SANDSTONE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PEDESTAL - AGRA RED SANDSTONE )

PROVIDING AND FIXING MIDDLE CAPITAL FINISHED SIZE OF (1.15 x 1.55 x 0.450M) IN FOUR PIECE, 2 PIECE OF FINISHED SIZE 2 X 1.15 x 0.27 x 0.450M AND OTHER TWO PIECE OF FINISHED SIZE IS 2 X 1.55 x 0.27 x 0.450M OF AGRA RED SANDSTONE IN MALE - FEMALE JOINERY, WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (CAPITAL - AGRA RED SANDSTONE )

PROVIDING AND FIXING TOP CAPITAL FINISHED SIZE OF (1.15 x 1.55 x 0.500M) IN FOUR PIECE, 2 PIECE OF FINISHED SIZE 2 X 1.15 x 0.27 x 0.500M AND OTHER TWO PIECE OF FINISHED SIZE IS 2 X 1.55 x 0.27 x 0.500M OF AGRA RED SANDSTONE IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (TOP CAPITAL - AGRA RED SANDSTONE )

PROVIDING AND FIXING 0.0625 MM THK DECORATIVE PANELS IN SAND STONE FOR GATE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT, TO BE FIXED ON M.S. STRUCTURAL FRAMEWORK WITH MECHANICAL FIXING, ADHESIVE OR CEMENT SLURRY OR BRASS PINNING, APPLYING ANTI-MOSS TREATEMENT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, ETC. COMPLETE. (INCLUDING ALL TAXES)

PROVIDING AND FIXING CAPITAL IN BELOW ARCH ELEPHANT FINISHED SIZE OF (1.12 x 1.50 x 0.600M) IN SINGLE PIECE OF AGRA RED SANDSTONE IN MALE - FEMALE JOINERY, WITH CARVING, GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (CAPITAL BELOW ARCH ELEPHANT- AGRA RED SANDSTONE )

PROVIDING AND FIXING AGRA RED SAND STONE ARCH ( IN THREE PIECE IN ONE SIDE ) IN FINISHED WIDTH OF 0.30M AND 0.45M OF ELEPHANT WITH CARVING IN INNER FACIA AND BOTH FACE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( ARCH WITH CARVING - AGRA RED SANDSTONE )

PROVIDING AND FIXING AGRA RED SAND STONE ARCH ( IN TWO PIECE ) IN FINISHED WIDTH OF 0.30M WITH CARVING IN INNER FACIA AND BOTH FACE IN MALE -FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( ARCH WITH CARVING - AGRA RED SANDSTONE )

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING AND CARVING BELOW SOFFIT OF ARCH IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.210 wide X 0.30 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.720M wide X 0.440M Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.720M wide X 0.440M Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING CHAATRI (SIZE = 0.980M X 0.980M X 1.40 M) IN AGRA RED SANDSTONE CHAATRI OF BASE, MIDDLE BODY, TOP BODY AND KALASH OF DESIGN AS PER DRAWING AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) INCLUDING ALL NECESSORY BRASS & OTHER FITTINGS, TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (AGRA RED SAND STONE CHAATRI )

PROVIDING AND FIXING KALASH (SIZE = 0.150M X 0.150M X 0.20 M) IN AGRA RED SANDSTONE OF DESIGN AS PER DRAWING AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) INCLUDING ALL NECESSORY BRASS & OTHER FITTINGS, TRANSPORTATION, LOADING, UNLOADING, STACKING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (AGRA RED SAND STONE KALASH )

PROVIDING AND FIXING PEDESTAL FINISHED SIZE OF (0.80 X 0.80 x 0.850M) IN SINGLE PIECE AS PER SIZE OF PEDESTAL IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CRAVING GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (PEDESTAL - AGRA RED SANDSTONE )

PROVIDING AND FIXING 230MM THICK AGRA RED SANDSTONE BLOCK MASONARY WALL OF REQUIRED SIZE AND SHAPE WITH ALL EDGES ARE MACHINE CUT WITH V-GROOVING OF 6MM IN ALL EDGES ON BOTH SIDES INCLUDING CUTTING, DRESSING, POLISHING, GRINDING AS PER THE DETAILED DRAWINGS PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT, LOADING, UNLOADING, INSTALLATION, WITH HYDRA CRANE OR SIMILAR EQUIPMENTS, FIXING, APPLYING ANTI-MOSS TREATMENT ON SURFACES OF STONE WITH SPECIFIED CHEMICALS AS APPROVED BY THE ENGINEER-INCHARGE, ETC. COMPLETE(EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING AND CARVING IN MIDDLE OF COLUMN IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.60 wide X 0.375 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING TOP CAPITAL FINISHED SIZE OF (0.955 x 0.955 x 0.375M) IN SINGLE PIECE, AS PER SIZE OF CAPITAL IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (TOP CAPITAL - AGRA RED SANDSTONE )

PROVIDING AND FIXING COLUMN FINISHED SIZE OF 0.50 X 0.50 AND TOTAL HEIGHT OF 1.854M IN EQUALE TWO PIECE (2 X 0.50 X 0.50 X 0.927M) IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (COLUMN - AGRA RED SANDSTONE )

PROVIDING AND FIXING COLUMN FINISHED SIZE OF 0.50 X 0.50 AND TOTAL HEIGHT OF 1.555M IN EQUALE TWO PIECE (2 X 0.50 X 0.50 X 0.7775M) IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (COLUMN - AGRA RED SANDSTONE )

PROVIDING AND FIXING COLUMN FINISHED SIZE OF 0.40 X 0.40 AND TOTAL HEIGHT OF 1.10M IN EQUALE SINGLE PIECE IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (TOP COLUMN - AGRA RED SANDSTONE )

PROVIDING AND FIXING COLUMN FINISHED SIZE OF 0.25 X 0.25 AND TOTAL HEIGHT OF 0.85M IN EQUALE SINGLE PIECE IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (TOP COLUMN - AGRA RED SANDSTONE )

PROVIDING AND FIXING 0.0625 M THK DECORATIVE PANELS IN AGRA RED SAND STONE FOR GATE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT, TO BE FIXED ON M.S. STRUCTURAL FRAMEWORK WITH MECHANICAL FIXING, ADHESIVE OR CEMENT SLURRY OR BRASS PINNING, APPLYING ANTI-MOSS TREATEMENT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, ETC. COMPLETE. (INCLUDING ALL TAXES)

PROVIDING AND FIXING KALASH ABOVE CENTER DOME FINISHED SIZE OF (0.542 x 0.542 x 0.753M) IN TWO PIECE AS PER DESIGN AND DRAWING IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (KALASH - AGRA RED SANDSTONE )

PROVIDING AND FIXING KALASH ABOVE SIDE DOME FINISHED SIZE OF (0.222 x 0.222 x 0.309M) IN SINGLE PIECE AS PER DESIGN AND DRAWING IN AGRA RED SANDSTONE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY, WITH CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING, ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. (KALASH - AGRA RED SANDSTONE )

PROVIDING AND FIXING 0.200 M THK DECORATIVE PANELS IN AGRA RED SAND STONE OF SIZE 1.167 X 1.630M FOR GATE HAVING CARVING IN MOTIF, MURALS, FLORAL EMBOSSING, CALIGRAPHY ETC. IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT, TO BE FIXED ON M.S. STRUCTURAL FRAMEWORK WITH MECHANICAL FIXING, ADHESIVE OR CEMENT SLURRY OR BRASS PINNING, APPLYING ANTI-MOSS TREATEMENT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, ETC. COMPLETE. (EXCLUDING ALL TAXES)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING AND CARVING BELOW SOFFIT OF ARCH IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.209 wide X 0.362 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.730M wide X 0.419M Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.364M wide X 0.651M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.664M wide X 0.15 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.535M wide X 0.271 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.455M wide X 0.189 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.280M wide X 0.210 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.210M wide X 0.123 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING AGRA RED SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.40M wide X 0.475 M Ht.) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING RED SAND STONE PLAN HOLLOW DOME BASE TO BE MADE BY INTERLOCKING STONE BLOCKS (MIN SIZE =230MM THICK ) MALE - FEMALE JOINERY GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, SHUTTERING, CLEANING, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.(EXCLUDING GST AND ROYALTY) (HOLLOW DOME WITH BASE CARVING - RED SANDSTONE )

PROVIDING AND FIXING RED SAND STONE PLAN HOLLOW DOME BASE TO BE MADE BY INTERLOCKING STONE BLOCKS (MIN SIZE =230MM THIKNESS) MALE - FEMALE JOINERY GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC.. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, SHUTTERING, CLEANING, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE.(EXCLUDING GST AND ROYALTY) (HOLLOW DOME 0.230M THICK - RED SANDSTONE )

PROVIDING AND FIXING RED SANDSTONE BLOCK MASONARY WALL OF THICKNESS 0.300 M AND SHAPE WITH ALL EDGES ARE MACHINE CUT WITH V-GROOVING OF 6MM ON ALL EDGES INCLUDING CUTTING, DRESSING, POLISHING, GRINDING AS PER THE DETAILED DRAWINGS PROVIDED BY THE PROJECT CONSULTANT/ ARCHITECT, LOADING, UNLOADING, INSTALLATION, WITH HYDRA CRANE OR SIMILAR EQUIPMENTS, FIXING, APPLYING ANTI-MOSS TREATMENT ON SURFACES OF STONE WITH SPECIFIED CHEMICALS AS APPROVED BY THE ENGINEER-INCHARGE, ETC. COMPLETE(EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = 0.230 wide X 0.311 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = 0.612 wide X 0.200 Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING CLADDING WITH JALLI (25 MM THK) IN RED SAND STONE , OVER FINISHED WALL SURFACE COLUMN AND BEAM FACE, IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , WHITE CEMENT, FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINERY, PLACING,ETC. COMPLETE. (PRIOR APROVAL OF SAMPLE/ BRAND BY EXEC. ENGINEER IS NECESSARY BEFORE USE ) SPEC. NO. : AS DIRECTED BY ENGINEER IN -CHARGE. ( PLAN PANEL- IN RED SAND STONE ) - 25MM THK

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (0.612 X .200 M Ht. ) (EXCLUDING GST AND ROYALTY)

PROVIDING AND FIXING SAND STONE BEAM WITH MOULDING WITH CARVING ON FRONT SIDE IN MALE - FEMALE JOINERY WITH GROOVES AND MOULDINGS TO BE FIXED WITH ADHESIVE, CEMENT SLURRY, BRASS PINNING ETC. COMPLETE AND APPLYING ANTI-MOSS TREATEMENT AS PER DRAWING, DESIGN AND THE DIRECTION OF THE SITE ENGINEER/ CONSULTANT INCLUDING TRANSPORTATION, LOADING, UNLOADING, STACKING, SCAFFOLDING, CLEANING , FIXING, JOINT FILLING, POLISHING, GRINDING, NECESSARY LIFTING MACHINARY, PLACING, ETC. COMPLETE. FINISHED SIZE = (.230 wide X 0.300 Ht. ) (EXCLUDING GST AND ROYALTY)

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Providing steel anchor dowel bars of 32 mm diameter and 4 m length at the base of the well including drilling holes of 60 mm diameter up to 2.5 m depth in rock, placing the dowels in position and effectively grouting the holes with CM 1:1 etc. complete.

Providing and laying Cast in situ/Ready Mix C.C. M-35 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing Country cut teak wood windows / ventilators with double leaf panelled shutters 25 mm thick without ventilators as per detailed drawing including stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. (for Sand)

Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. (for other than Sand Minerals)

Carrying out testing BASIC TEST OF CEMENT. Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness.

Carrying out testing BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity, Impact Value, Crushing Value.

Carrying out testing BASIC TEST OF AGGREGATE. Sieve Analysis.

Carrying out testing BASIC TEST OF AGGREGATE. Abrasion Value.

Carrying out testing BASIC TEST OF AGGREGATE. Flakiness Index & Elongation Index.

Carrying out testing BASIC TEST OF AGGREGATE. Stripping Value. (for Bituminous Work)

Carrying out testing BASIC TEST OF AGGREGATE. Soundness.

Carrying out testing BASIC TEST OF MIX DESIGN. GSB Mix Design. Cement Treated Sub Base (CTSB)

Carrying out testing BASIC TEST OF FINE AGGREGATE. Fineness Modulus ( Sieve Analysis ), Silt & Clay Content

Carrying out testing of BASIC TEST OF FINE AGGREGATE. Chloride & Sulphate Content.

Carrying out testing BASIC TEST OF FINE AGGREGATE. Silt Factor.

Carrying out testing BASIC TEST OF BRICKS. Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Carrying out testing BASIC TEST OF FLOORING TILES (MOSSAIC / CEMENT) Flexural test ( Set of 6 Tiles), Water Absorption ( Set of 6 Tiles). Resistance to wear (Set of 6 Tiles).

Carrying out testing BASIC TEST OF FLOORING NATURAL STONE (Kota, Marble, Granite, Tandur.etc.) Water absorption, Specific gravity

Carrying out testing BASIC TEST OF CERAMIC TILES / VITRIFIED TILES Water Absorption, Modulus of Rupture (Set of 6 Tiles)

Carrying out testing BASIC TEST OF CONCRETE Compressive Strength OF C.C. Cube (Set of 3 cubes).

Carrying out testing BASIC TEST OF CONCRETE Concrete Mix Design (With all Tests on basic materials)

Carrying out testing BASIC TEST OF CONCRETE PAVING BLOCKS Compressive Strength , Water Absorption, (Set of 8 Blocks)

Carrying out testing BASIC TEST OF STONE/ RUBBLE Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

Carrying out testing BASIC TEST OF SOIL / MURUM Sieve Analysis.

Carrying out testing BASIC TEST OFSOIL / MURUM Liquid limit & plastic Limit.

Carrying out testing BASIC TEST OF SOIL / MURUM Compaction Test (Proctor Density ).

Carrying out testing BASIC TEST OF MURUM. C.B.R. Test ( Lab ) With compaction test.

Carrying out testing BASIC TEST OF SOIL / MURUM C.B.R. Test ( Field Determination Test) Excluding Transportation.As per IS 2720 Part XXXI

Carrying out testing BASIC TEST OF STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Carrying out testing BASIC TEST OF STEEL BAR TESTING Above 16 mm (Set of 3 Bars)(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW (1 socket Point in each lift shaft & 1 Nos. in each Lift room)

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting 415V, 16A porcelain base neutral link complete erected in provided M.S. box..

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, D-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, D-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 200 kVA, Mineral oil immersed and naturally cooled outdoor type, copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50 ℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer)off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 780 Watts at 50% load, 2300 Watts at 100% load as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspector, as per specification no SS- TRNSL.

Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mm suitable for 11 kV with brass couplings etc. for removing drop out fuses at 6 meters length, 4 pieces each with rain shade with hand grip including earthling chain 1.5m complete.

Supplying and erecting anti climbing devices, fabricated from pole clamps of MS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erected on pole complete.

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.).

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and installing 3 m fibre patch cord duplex single mode for OS1/OS complete.

Supplying and installing single mode simplex pigtail with SC/LC splicing complete.

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 μm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH

Supplying and erecting rigid steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. para no. 1.2.1

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. withnecessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver (up to 550m, support 3.3V power) erected in provided rack complete.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 34.40 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB(A) at 1.0 m, provided with first filling of oil, diesel not less than 300 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specificationNo. WG-MA/CC.

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying and fixing 1 x 12 duplex adapter panel - SC complete.

Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA - LC Type

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 1 x 6 duplex adapter panel-SC complete.

Supplying and erecting rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-

Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW (For Earth- green color for

Supplying and erecting mains with 4x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying erecting, testing to 2 core shielded Microphone cable as per specification No. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.0 sq. mm speaker wire complete.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete..

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (for power & IP comp board circuit)

Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW(for power & IP comp board circuit) ( Rate reference taken from Note-1)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Providing and spreading stone metal 25mm size for 100 mm depth above the ground level.

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular typeT.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete..

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram).

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast).

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.

Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.

Supplying and erecting ISI mark modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0 mps VS · Car/Landing door clear opening of 700/800 mm wide x 2000 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead.

For Lift having 700mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.

For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/ SW.(EXHAUST FAN)

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ HW (POP 15W-48, 40W-16, LOOP LIGHT-24)

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

SITC of Electric Traction Passenger Lift with · Rated capacity :- 16 Passenger/1088Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1000mm wide x 2000 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead.

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW/CW

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW. (TUBELIGHT-134, WALL LIGHT-51, OUTDOOR LIGHT- 4, LOOP LIGHT-20, 2 WAY POINT-4)

2 WAY Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW

Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.

Supplying and erecting fresh air cum Exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking Sr. No. Anddate of erection.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF.

Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM without speed regulator, metallic blades, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 meter length and hand shield type 3 pin6A. plug top complete with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.(POP-15W)

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

Supplying and erecting storage type water heater 15 litres capacity having standing loss <0.419 kWh / 24 hour / 45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, multi function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH

Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia).

Supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater.

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB complete.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A upto 630A MCCB complete.

Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 400A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 .

Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8)

Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)

Supplying and erecting terminal spreaders suitable for 4 pole, above 250A up to 400A MCCB (Set of 8)

Supplying & erecting street light control panel outdoor type, for single phase 2 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery back up, having IP54,IK10 protection, 2 pole contactor up to 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box.

Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery back up, having IP54,IK10 protection, 4 pole contactor up to 60A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame.

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 30 A, 3 pin plug & earth socket and 30A, 3 pin plug top with 30A triple pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron / GI frame.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB

Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 4 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 2 nos. feeder with 2 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard.

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB

Supplying and erecting static energy meter with 240V 50 Hz. AC supply 5 to 30 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, kVAh, V,I,PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc

Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral as per specification no. CP-SPD

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (1 Runs from RMU to TRANSFORMER )

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable straight through joint kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CBJT/HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (185 sq mm) (DP-2 and Transformer-1)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL FOR FIRE PANEL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ (11 mtr pole 2 No. 9 mtr pole15 No for Point of Supply & Line Pole) (Dept has to considered point of supply nearest existing line which is in front of project, contractor has to ensured the feasibility of load on the same line and arrange the power as per actual work before quote, and include the cost of the same on the date of the joint inspection with MSEDCL concern officer required power feasibility was available on line passing front scheme ).

Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification no. OH-PL/VCA

Supplying and erecting 75x40 x6mm with 4.4mm thick web and 7.3mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065mm for 11kV, 1320mm for 22kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCA

Supplying & erecting end pole D. P. Structure for 11/0.415 kV, 200 kVA Transformer with R.S.J. Pole 2 Nos. of size 100mm x 116 mm x 11 m Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 400 Amps as incomer & 6 Nos.200 Amps Kitkat / MCCB for out going circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set. 2 Nos. Top channel of size 100 mmx 50 mm for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer. Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting Distribution Box , Transformer Belt etc.as per drawing (min. 124 Kg. iron work) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected in c.c. foundation complete.

Supplying and erecting ACSR conductor of size 6/1-3.66 mm complete.(Mink) (255 kg/km) as per specification No. OH-CON/ACSR

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI

Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN

Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete.(dp-20+17*2=34)

Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminium paint complete.

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete.

Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OHPL/ HM (excluding luminaries)

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Supplying & erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps, nut bolts etc. complete as per drawing.

Supplying and fixing MS base plate 30x30x0.6cm size fixed to the pole base either by welding 12mm dia fixed at position.

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly back fill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI

Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). (40x5) (For Transformer Neutral Earthing)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. (2 kg per pole)

Supply & erection, of decorative angular upward,downward focus waterproof spike light of 7-10Wwith required all accesosries eg. Stand, cover , brackers etc or any other make equivalent with above specification like Philips/ wipro/ D.vas/Suncity any suitable Make as per Executive Engineer (Elect) NMC Nagpur.

Supplying and erecting testing and commissing of 8.5 watt LED in ground Luminaires with IP 65 protections. Luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content. Hard chrome plated stainless steel 316 grade front ring. Molding shaped seal gasket. Step tempered glass of 8mm thickness with static load resistance of 2526 kgs. IP68 PG-9 cable gland, Optical reflector efficiency = 90%, Luminaire hard wired with 3 x 1.0mm2 cable of 0.5mts length, Supplied with mounting sleeve for preparing recessed opening in ground. Integral power supply. Earth connection. Safety class I Protection class IP67. Mechanical resistance IK09. CE - Conformity mark, Suitable for operation on 240V, 50Hz single phase ac supply.(Equavant to Cat. no. 4146)

Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.

Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD

Supplying and erecting testing and commissing of Modern Chandelier 240V AC, 50 HZ, brass material gold finished asfour almaza crystal, ip 20 class-1 hanging type, 1.8 kg with 2 year warranty Gold & chrome colour made up of brass material with 2 nos of head & 4 x 10 W LED (Gold Plating) (CONSTELLA MAKEJAGUAR)

Supplying and erecting testing and commissing of 0.900 mtr decorative (DWARKA MAKE DBL-101) Technical Specications Luminaire made of extruded aluminium alloy (grade 6063) with non corrosive SS fasteners.-11 W LED LIGHT with 1 Meter pole • For optimum coordination with lighting situation, these luminaries can be supplied in three different mounting heights. • Non yellowing UV stabilized polycarbonate translucent diffuser. • Silicon gasket. • MS mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. • Cable entries for through-wiring of main supply cable. • Integral power supply • Earth connection • Safety class I • Protection class IP 54ve • - Conformity mark • Suitable for operation on 240V, 50Hz single phase ac supply. model/catloge no 6976 or any other make equivalent with above specification like Philips/ wipro/ D.vas/Suncity

SITC with wires, Outdoor Architectural Flood Light with PDC Aluminum Alloy housing system ensuring optimum thermal management, Heat resistance toughened glass cover,with secondary PMMA lens for effective light distribution Corrosion resistance Powder coated using Nano Technology, Encapsulated high efficiency isolated remote driver with necessary safety protections along with additional SPD of 20KV, Life of 50,000 burning hrs as per L70 standard, THD <10%, CRI >70, Beam angle - 15° & 30°, Luminaire efficacy >90 LPW @ 5700K, Available in RGBW(W-5700K), Compatible with DMX 512.

SITC with wires, Outdoor Architectural LED Circular Projector flood light with System wattage not more than 15W, System efficacy>45LPW (±5%), CCT RGBW (W=3000K) with 4in1 LED for uniform illumination with Non- Integral Driver & Decoder, Fixture should be compatible for DMX512. Housing should be PDC Aluminium alloy ensuring optimum thermal management , Fixture should be available in clear optics with possible beam angles 25°, 30°,40°, 50°(As per approved concept & Site requirement). Secondary Lens should be of PMMA material & covered with Heat Resistance Toughened Glass cover, Hinge design should be easily adjustable with precision dial feature for >90° tilt angle adjustment, Ingress Protection should not be less than IP66, Impact Resistance should be IK08 or more. Fixture height should be approx. 185mm (±15mm) with Normal horizontal tilt position. Snoot Dia should not be more than 93mm (±5mm) , Fixture should be surface/Wall mounted as per site requirement. Driver should be integral isolated CC/CV Driver. Total Inbuilt and Additional Surge protection of more than or equal to 10KV along with other necessary protections No Load protection, Over voltage protection, Short circuit protection. LED Life should be 50,000 B Hrs@L70 B10, THD should be less than 5% , PF>0.95, Operating voltage range 140-270V AC, Operating ambient Temp 0 to +50°C, Operating Humidity 10-90%. Fixture weight should not be less than 3.5KG (±10%) ensuring material & built quality. Powder coating should be corrosion resistant Nano technology powder coating in Silver grey colour. Standard Power cable should have IP67 connector. Technical Data Sheet, Type test Certificate from In-House NABL accredited Lab should be submitted on request. Manufacturer/OEM emblem/logo should be embossed into the Aluminium housing to allow identification of OEM & traceability till the life of the fixture. Manufacturer/OEM should have complete manufacturing set up in India with In-house capability of Housing, PCB & Driver Manufacturing and In-House NABL Accredited LAB for Electrical & photometry testing. Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015.

Supplying and erecting testing and commissing of Decorative POLE light (4.5M) (DIYA POLE WITH BRACKET ) designed to provide rotationally symmetrical light distribution on ground surfaces. The product design and construction of the luminaires are characterized by high luminous ef ciency an extremely long service life and uniform illuminance. A sleek minimalist shape provides distinctive lighting effects by night and decorative urban effect during the day. Technical Specications • Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Luminaris 30 W LED with 3 Mtr Pole • Non yellowing UV stabilized polycarbonate clear diffuser • Silicon gasket • GI mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. • Cable entries for through-wiring of mains supply cable • Integral power supply • Earth connection • Safety class I • Protection class IP65 • - Conformity mark • Suitable for operation on 240V, 50Hz single phase ac supply.model/catloge no 6969 (K- LITE) or any other make equivalent with above specification like Philips/ wipro/ D.vas/Suncity / DWARKA

Annual mentannce of complate lift (4%)

Annual mentannce of complate lift (4%)

Supplying and erecting of 8 MTR (Merlin- K LITE) Area lighting pole to provide rotationally symmetrical light distribution on ground surfaces. The product design and construction of the luminaires are characterized by high luminous ef ciency an extremely long service life and uniform illuminance. A sleek minimalist shape provides distinctive lighting effects by night and decorative urban effect during the day. • Merlin is a combination of swaged pole. • Merlin bracket, suitable for mounting 2 nos. of integral type, wide spread, directional ood light. • Built-in cylindrical control box with service door. • Prewired with MCB, loop in-loop out arrangement, terminal block, etc. • Swaged at the top to accommodate Merlin bracket assembly. • Coated with epoxy zinc phosphate primer. • Finished with polyurethane based paint. • Suitable for operation on 240V, 50Hz single phase ac supply. Model no- K Lite-KP-8323 or any other make equivalent with above specification like Philips/ wipro/ D.vas/Suncity any suitable Make as per Executive Engineer (Elect) NMC Nagpur.

Supplying and erecting testing and commissing of Modern Chandelier 240V AC, 50 HZ, brass material gold finished asfour almaza crystal, ip 20 class-1 hanging type,4.5 kg with 2 year warranty Gold & chrome colour made up of brass material with 2 nos of head & 4 x 10 W LED (Gold Plating) (LANCIA MAKEJAGUAR)

Supplying & erecting 65" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

SITC with wires, DMX Controller shall be a compact and powerful, designed for Controlling RGBW enabled LED lighting fixtures; able to control up to 2 universe of 512 DMX channels, compatible with all DMX512 enabled devices, 64 fixtures with up to 16 channels of each or 256 fixtures with up to 4 channels of each and 50 Zones so that each individual zones can be controlled separately to make it ideal for large-scale lighting installations with Built-in clock and calendar feature, allowing users to schedule lighting effects to run at specific times and dates. Advanced programming capabilities and wide range of programming capabilities, including the ability to create complex scenes and effects using simple interface along with live color mixing option enabling users to create custom color combinations in real-time applications using option of RS232, Dry Contact Ports and an Infra-Red input enabling easy third party Integration and trigger. The controller should have a USB / Ethernet port for easy connection to a computer in-built WIFI in-built built-in memory for storing programs and sequences (no external storages are entertained)and support protocols including DMX512, DMX512-A, RDM further should support RGB, CMY, HSI, and HSV. Controller should be compatible to create multiple programmable scenes and in various programmable chases.The controller should come with a 5-year warranty against defects in materials and workmanship with 2 Nodes for controlling seperate programes over domes.

Supplying and erecting testing and commissing of Modern LONG Chandelier (0.60-1M LONG) 240V AC, 50 HZ, brass material gold finished asfour almaza crystal, ip 20 class-1 hanging type, 16-20kg with 2 year warranty Gold & chrome colour made up of brass material with 2 nos of head & 5 x 10 W LED (Gold Plating) (GRAPEWINE MAKEJAGUAR)

Supplying, installing, testing & commissioning of 64/80 Ch Network Video Recorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 Megapixel Resolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920 × 1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-adaptive Ethernet interface, support multi brand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specificationss no. CCTV-NVR

DISMANTALING WORK & MEDCL DEPOSIT

Shubham EPC Private Limited