Special Repair work for 56 HIG flats at MKB Nagar

Painting old walls/Ceiling with best cement paint etc., including preparation of surface and neat finishing & Crack Filling and scaffolding etc., complete with standard specification and as directed by the departmental officers.

Painting the old walls with two coats of approved Interior cement paint over one coat of primer including cost of brushes, cement paints, Crack Filling, scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Executive Engineer before use)

Re varnishing the old wood work with best shellac with fine varnish of approved quality of Teak Wood natural finish including preparation of surface withsand papering inpatty priming etc.,complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Painting Old wood work with One coat of synthetic enamel ready mixed paint of approved quality and colour including cost of paint, brush, scaffolding and labour charges etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Painting the old iron work with One coats of best approved first quality and colour of synthetic enamel paint including cost of paint, brush, scaffolding and labour charges etc.,complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Painting the old wall with ready mixed plastic Exterior Emulsion Paint of first class quality and of approved colour over a priming coat including cost of brushes, Exterior emulsion paints, Crack filling , scaffolding, curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use).

Supply and laying of terrace floor tile Pointing with cement mortar 1:3, in full depth of tiles etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Dismantling and removing the damaged floor tiles including labour charges etc., complete in all respects and as directed by the departmental officers.

Supplying and laying Stainfree Nano polished Vertified tiles 600 x 600 x 8mm including Pointing and labour charges etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Removal of old cement plaster from walls including labour charges & scaffolding etc., complete in all respects and as directed by the departmental officers.

Plastering with Cement Mortar 1:3 (One cement and Three Plastering sand),10mm thick mixed with water proofing compound @ 2 kg per 10 Sqm including scaffolding & curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Sub Total

Please Enable Macros to View BoQ information