REPAIR/REPLACEMENT OF FLOOR/WALL TILES FALSE CEILING PLUMBING AND SANITARY ETC IN 23 PARA,5 PARA,BP LINE,FMC,ODF,SHERON LINE,METCALF ACCN,MAP ACCN HQ 50 (I) BDE LOC,CDR HOUSE,AGE OFFICE,SWIMMING POOL 411(I) PARA FD ETC UNDER AGE B/R -I OF GE (E)AGRA

Amount

Demolition of brick work of any type built in cement mortar complete all as specified and directed.

M& L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1: 6 Complete all as Specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound Complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M & L for preparation of New plastered surfaces of walls and applying two coats of cement base paint walls including a thin layer of exterior wall putty of 2 mm thick etc complete all as specified and directed

M & L for complete removal of existing treatment of old plastered wall surfaces by scrapping and applying two coats of Exterior grade Apex distemper over and including a layer of wall care putty (avg thickness 2 mm) complete all as specified and directed.

M & L for preparation of New plastered surfaces of walls and applying two coats of oil bound distemper on walls etc complete all as specified and directed

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing) & rubbish off the premises complete all as specified.

M & L 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed

M & L for 10 mm thick rendering on wall surface in cement mortar (1:4) complete all as specified and directed

M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor including finishing concrete surface even and smooth without using extra cement complete all as specified.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor including finishing concrete surface even and smooth without using extra cement complete all as specified.

M & L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as Specified and Directed.

M & L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in wall and vertical surfaces such as skirting & Dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as Specified and Directed.

S &F joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed.

S &F joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed.

S &F joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface of size 350x 250x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement set and jointed in neat cement slurry over 10 mm thick screed bedding in CM 1:4 to Match with the grade of existing tile complete all as specified and directed.

M&L for Rubber Moulded Chequered Cement concrete tiles 20cm x 20cm x25mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, with grey cement and Coloured pigments incl 15 mm thick screed bed with CM 1:6 complete all as specified and directed.

M& L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps,cills,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M& L for granite (of any type) work (table rubbed and polished) 20 mm thick For wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Demolition of cement Concrete as in ground floors and pavings not exc 15 cm thickness (above or below) of any description and in any position not otherwise specifically provided Complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 10 mm wide to the full depth of PCC at every 3 metre and filled with sealing compound grade A complete all as specified and directed.

M & L for sand Cushion for filling in floors or pavings,laid in layers n exc 15 cm thick,spread,levelled and rammed including watering complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade Complete all as specified and directed.

M& L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for PCC 1:2:4 Type B0 1:2:4 (12.5 mm graded aggregate) as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Mild steel TMT bars 8 to 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to all as specified.

Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed.

Taking down shutters of any description n.exc 1.00 sqm each anf removed from site complete all as specified directed.

Taking down shutters of any description exc 1.00 and n.exc 2.00 sqm each and removed from site complete all as specified directed.

Taking down chowkhats with shutters (without taking off shutter from the frame) exc 1.50 sqm but n.exc 4.00 Sqm each and removal from site, complete all as specified and directed.

S&F in repair of 2nd class hard wood plain solid straight chowkhats and frames, wrought framed rebated on solid round or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

S&F of Flush shutters 30 mm thick, solid core construction, with parcicle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S &F of 2 nd Class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like complete all as specified and directed

S&F 30mm thick Glazed and skeleton shutters, of 2nd class Hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified directed

S&F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings complete all as specified and directed.

S & F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including power coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&FAnodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Taking down aluminium sliding or side hung shutter of any size and description and refixing after necessary repair incl rescuring the pintols/hinges,oiling, adjusting providing packing if required as in repair complete all as specified and directed.

Fixing only in repair of Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F for 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty or with aluminium snap beading and rubber gasket in square n exc 0.5 sq. m complete all as specified and directed.

S&F in repair for 5.5 mm thick Sheet glass,ordinary quality and glazing with aluminium snap beading and rubber gasket or oil putty in square n exc 0.5 sq. m including hacking out of existing broken glass from aluminium doors amd windows complete all as specified and directed.

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S & F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F, aluminium handles 100mm size, cast type, anodised complete all as specified and directed.

S&F double leged door stopper of alluminium with rubber complete all as specified and directed.

M & L 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repair mild steel barrel tower bolt of size 150mm stove enamalled black with bright bolt and fixed complete all as specified and directed.

S&F in repair Mild steel sliding door bolt of size 300mm bolt type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed Complete all as Specified and directed.

S&F in repair mild steel pressed handle oval type stove enamalled black size 150mm complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces complete all as specified and directed.

S&F 75 mm Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type E-22 complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs Aluminium (extruded section) body Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F in repair of steel ventilators,top hung ,with glazing bars with hinges,frame and peg stay etc complete all as specified and directed.

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards / slabs / blankets of any thickness including cover fillets complete all as specified and as directed.

Supply & Fixing GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600 x 600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4 mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm

S & F of prelaminated E - type particle board of 9 mm thickness fixed with staples on snap grid as in ceiling complete all as specified and as directed.

~Ditto~ all as per item No 67 above but except material complete all as specified and as directed.

S & F in repair of decorative curtain rod made of mild steel pipe covered with coloured PVC layer dia of rod 25 mm with decorative ends complete all as specified and as directed.

S & F in repair of Brass CP wash basin mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repair of Brass chromium plated shower rose 125 mm size including shower arm complete all as specified and directed.

S&F in repair of PVC connections 15mm size with PTMT nuts of length 450 mm Complete all as Specified and directed.

S&F in repair 15 mm bore dia cast copper alloy Stop/angle valves CP fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions but fancy type complete all as specified and directed.

S&F in repair of 15 mm bore dia Bib tap standard PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed.

S & F in repairs vitreous china hand wash basin white exclusive quality with pedestal size 550 x 400 mm including brackets fixed complete all as specified and directed.

S&F of Ball PTMT valve of 15 mm bore dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F of Pillar taps,15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F of PVC valveless, syphonic action type, flushing cistern, capacity 10 lits, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F of PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and making good to floors complete all as specified and directed.

Dismantling water tanks of capacity exc 250 lit but n.exc 500 litre capacity.

S&F of Rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part IComplete all as Specified and directed.

Taking up or down steel tubing and connections 15 mm dia, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F steel Tubes,15 mm dia `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speciifed and as directed

Taking up or down steel tubing and connections 20 mm dia, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F of steel Tubes,20 mm dia `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speciifed and as directed

S & F in repair of 15 mm dia bore gun metal gate valve screwed both end with iron head wheel complete all as specified and directed

All as per item No. 89 Above but of 20 mm bore dia.

S&F in repair of 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and Including waste pipe other end fixed

Dismantling cast iron work/mild steel work of any description complete all as specified and directed.

S & F in repair of cast iron floor traps 'P' or 'S' with CP grating including jointing to waste pipe 100 mm bore complete all as specified and directed.

S & F in repair of cast iron bends (any radius) with duck's foot or heel rest 100 mm bore with or without oval excess door complete all as specified and directed.

S & F in repair of cast iron cowl of bore 100 mm dia complete all as specified and directed.

S & F in repair of Cast iron soil, waste pipe sand cast in any length with or without ears with cement joints , laid in trenches or in floor of size 100 mm bore complete all as specified and directed.

S & F in repair of Cast iron soil, waste pipe sand cast in any length with or without ears with cement joints , fixed to wall of size 100 mm bore complete all as specified and directed.

S & F of traps for WC any type `P' or `S' complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and/or riveted or forged into spikes ,framed guard bars ,barred iron doors ,ladders ,framed blasters ,walk ways railings framework of water tanks and similar work confirming to Fe-290,Gde-E-165 complete all as specified.

S&F for steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt weld ed tubes confirming to IS 1161-1979 Gde St-240,including gusset plate pole etc complete all as specified and directed.

Fixing and errection only steel work as in tubular truss and like etc complete using erw or induction butt welded tubes angles etc complete all as specified and directed .

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws in single length complete all as specified and as directed.

M & L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for 0.63 mm thick galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers,in roofs,wallsetc. with grade of zinc coating 275 including fixing L type & J type or cranked hook bolts as in roof covering / cladding to wall, fixed with self tapping screws in single length complete all as specified and as directed.

C P Singh and Co

Attar Singh and Sons

M/S RISHI RAJ AGRAWAL

M/s D AND R CONSTRUCTION AND SUPPIERS