Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAccepted-AOC 1101 A WING SACHDEV COMPLEX JANGAL MANGAL RAOD BHANDUP W MUMBAI 400078 | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹47.0 L+₹5.1 L (12.1%)Rejected-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-AOC NOT BEING LOWEST | |
| 3 | L3₹48.0 L+₹6.1 L (14.5%)Rejected-AOC SWAGAT CO OP HSG SOCIETY LTD 22 303 CHAITANYA SHIVAJI RAJE COMPLEX MHADA COMPLEX OPP EKA NAGAR KANDIVALI W MUMBAI 400 067 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400067 | L3 | Rejected-AOC NOT BEING LOWEST | |
| 4 | L4₹48.6 L+₹6.7 L (15.9%)Rejected-AOC FLAT NO 404 A WING HILL SIDE RESIDENCY BEHIND KIRTI POLICE SOCIETY KATRAP BADLAPUR EAST DIST THANE MAHARASHTRA 451503 | 451503 | L4 | Rejected-AOC NOT BEING LOWEST | |
| 5 | L5₹54.3 L+₹12.4 L (29.6%)Rejected-AOC | L5 | Rejected-AOC NOT BEING LOWEST |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
10 Oct 2023, 6:00 pmClosed
GE AF LOHEGAON
GE AF LOHEGAON LOHEGAON 411032
SPECIAL REPAIR TO ELECTRICAL FITTINGS OF DSC POSTS AND REST ROOMS AND INSTALLATION OF FIRE ALARM SYSTEM IN STATION IT CENTRE AND PROVISION OF DE-HUMIDIFIERS AT VARIOUS LOCATIONS AT AFS PUNE UNDER GE AF LOHEGAON
2023_MES_609212_2
8736
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AFS PUNE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹86,000
Yes
19 Sept 2024
27 Sept 2023
16 Oct 2023
27 Sept 2023
10 Oct 2023
4 Oct 2023
Amount
Supply, install testing commissioning of non cyclic rotary, Desicant type dehumidifire with digital humidistate with sensor having process air flow 600 CMF react air flow 200 CMH to reduce the humidity 55 + 5 automaticaly with digital humidistate and sensor, having react heater power 7.2 KW , process motor 0.37 KW, react motor power of 0.37 kw , 150 mm dia hose pipe, including necessary core cutting for passing hose pipe all confirming and operating at 415 volts, 50 HZ 3 phase power supply complete all including mounting bracket/stand made out of angle iron duly painted as per site requirement complete all as specified and directed.
Supply & Fix 415 Volts 50 HZ triple pole & neutral enclosure along with three pin &earth plug with socket complete with one Triple Pole MCB 63 Amps complete all as specified and directed.
Supply & Fix MCB DB Double Door SPN 4 way 240 volts complete all as specified and directed.
Supply & fix MCB TPN, 240 volt, 40 Amps, 10 KA, C Curve complete all as specified and directed.
Supply & Fix in repair MCB DB Double Door SPN 12 way 240 volts.including mounting in wall connecting up with wire/cable etc complete all as specified and directed.
Supply & fix in repair MCB SPN, 240 volt, 32 Amps, 10 KA, C Curve complete all as specified and directed.
Supply, laying & testing XLPE insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 10 sq mm ,4 core, 1100 Volts grade complete all as specified and directed.
Supply, laying & testing XLPE FR LSH insulated Armoured heavy duty underground cable of size 1.5 sq mm ,2 core, 1100 Volts grade multi stranded copper conductor cable with Red colour, suitable for fire alarm complete including passing through culverts, laid in ground & fix in wall/ceilings with clamps complete all as specified and directed.
Supply, laying & testing XLPE insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 25 sq mm ,3.5 core, 1100 Volts grade complete all as specified and directed.
Supply, laying & testing XLPE insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded aluminium conductor of size 10 sq mm ,2 core, 1100 Volts grade complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, including wall mounting brackets, screws,, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed.
Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box type with driver, including wall mounting brackets, screws, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply & lay FRLS PVC 4 core 1.5 sqmm (red Colour) armoured multi stranded copper conductor heavy duty cable saddled in wall/ceiling, truss laid in ground etc all as specified and directed by engineer-in-charge
S&F MCCB 3 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.
S & F MCCB DB TPN 4 Way , 415 V, along with bus bar & conneting up with cables complete all as specified and directed.
Supply & fix MCB TP, 240 volt, 40 Amps, 10 KA, C Curve complete all as specified and directed.
Supply & fix MCB SP, 240 volt, 6-32 Amps, 10 KA, C Curve complete all as specified and directed.
Supply, installing and testing of Fire alarm control panel adressable fire dection and alaram type with capacity of two Loop panel with capacity from 99 detectors & 99 modules up to 200 detectors and modules per each loop,complete with all acessories and battery back up for 48 Hrs in stand by mode and 15 Minutes in alaram condition. Each loop shall support analog/addressable devices maximum capacity and have TCP/IP facility and Qwerty key pad for programming and including relay module, Control Module, Zone Module, Fault Isolator, power supply module addon modules. The panel shall be as per tech specification UL listed RS 232 communication port complete in all respect complete all as specified and directed.
Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified & direcated by Engineer-in-Charge
Supply and fix adressable smoke Detectors suitable with existing hochiki fire alarm control panel existing at site Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified. & direcated by Engineer-in-Charge
Supply, install, testing and comissioning of adessable break glass manual call point including sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete. all as specified. & direcated by Engineer-in-Charge
Supply, install, testing and comissioning of Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of +5 DB 1000 mtrs range with starter and all connected items all as specified. & direcated by Engineer-in-Charge
Sypply and fix electric motor siren conforming to IS 1941 suitable for 3 phase 415 Volts supply with motor not exeeding 3.75 KW and able to deliver 143 DB level. Siren shall have automatic equipment for producing a warbling note and including starter unit, relay module, foundation etc complete all as specified & direcated by Engineer-in-Charge
Supply Laying in trench & Fixing on wall/roof with GI saddle Double wall corrugated pipe of dia 75 mm, SN 8 for cable protection complete all as specifed and directed by Engineer-in-Charge
Supply, Installation Testing & Commissioning of Active Repeater Panel to be integrated via RS485 network card with Fire Alarm Control Panel,larger display Full colour 800 x 480 LCD with resistive touch screen and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels. The Panel shall have compliant with EN54-2, EN54-4 and complete all as specified and directed by Engr-in-Charge.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified. & directed by Engineer-in-Charge
Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified. & direcated by Engineer-in-Charge
Excavation in trenches in disintegrated rock not exceeding 1.5m wide and not exceeding 1.5 metre in depth and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified. & direcated by Engineer-in-Charge
Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point. Complete all as speacified & direcated by Engineer-in-Charge.
Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm.Complete all as speacified & direcated by Engineer-in-Charge.
M&L for sub main wiring with three single core 1.5 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade with and including stove enamelled steel conduit laid over the surface of structures/wall/ceiling the cable shall be drawn in through PVC conduit and connected to DB, equipments, connector, common earth dolly all as specified in wall, ceiling, steel structures of buildings with necessary saddles & spacers and as directed & direcated by Engineer-in-Charge
M&L for sub main wiring with three single core 4 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade with and including stove enamelled steel conduit laid over the surface of structures/wall/ceiling the cable shall be drawn in through PVC conduit and connected to DB, equipments, connector, common earth dolly all as specified in wall, ceiling, steel structures of buildings with necessary saddles & spacers and as directed
Supply and Fix Switch socket combination 5 Amps, 230 volt, including sunken terminal box & top cover plate Complete all as speacified & directed by Engineer-in-Charge.
Taking down copper/ aluminum point wiring (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc.
M & L for point wiring with PVC insulated unsheathed 1100 Volts grade two single core multistranded copper conductor cable 1.5 Sqmm drawn in and including casing-caping and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for the following:
One light / fan / bell point controlled by one switch.
One 5A 2pin/3pin socket out let multipurpose on the same board with other switches.
One 5A 2pin/3pin switch socket out let multipurpose on independent Board.
All as per item No. 35 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board
Supply & Fix in repairs switch piano single pole flush type 5A, 240 V one way.
Supply & Fix in repairs Bell push flush type 5 amp, 250 Volts complete all as specified and directed.
Supply & Fix in repairs switch socket combination 2 in 1 , 5 Amps multipurpose flush type complete all as specified and directed.
Supply & Fix in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed.
Supply & Fix in repairs Ceiling rose surface bakelite three terminal, 240 V complete all as specified and directed.
Supply & Fix in repairs electronic regulator Step type 2 module type 240V suitable for ceiling fan complete all as specified and directed.
Supply and fix in repairs bell ding dong AC 230 V single pole complete all as specified and directed.
Taking down carefully ceiling fan, exhaust fan of any sweep and dismantling of blades canopy down rod etc & remove to store for repair. & Refix the same including provision of 3 core 1.5 sq mm copper flexiable cable from ceiling rose to connector complete all as specified and directed.
M & L for Painting only of ceiling fan,exhaust fan, of any size and type, scraping out of old paint, filling of cavities with filler preparation of body and cleaning of dust etc Painting with first Quality Paint including over quot of zinc primer writing of MES number complete all as specified and directed.
Shree Ayyappa Engineering
cooltech engineering services
M/S SOMANATH ENTERPRISES
industrial suppliers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .