SPECIAL REPAIR TO MD ACCN BLDGNO P-42 TO P-45 OF 952 TPT COY ASC TYPE A AND PROVN OF INSTALLATION OF IRON GRILL TO CORRIDORS OF OTM ACCN AT GROUND FLOOR OF 51 SUB AREA PRO UNIT UNDER GE NARANGI

Amount

Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as diredted

Demolition and breaking up drain pipes (salt glazed ware or AC or reinforced concrete) internal dia 150 mm set in cement mortar etc complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware or AC or reinforced concrete) internal dia 200 mm set in cement mortar etc complete all as specified and directed.

Supply and fix 150mm internal dia reinforced cement concrete pipes of class NP3 , laid and jointed in cement mortar with collars etc complete all as specified and directed.

Supply and fix 200mm internal dia reinforced cement concrete pipes of class NP3 , laid and jointed in cement mortar with collars etc complete all as specified and directed.

Material and labour for Concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregates) to drain pipes 150 mm bore Pipe including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Material and labour for Precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2, ( using 40 mm grades stone aggregates) as in foundations and mass concrete etc complete all as specified and as directed

Material and labour for TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and as directed.

Material and labour for Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over 15mm thick screed bed cement mortar (1:6) complete all as specified and as directed.

Material and labour for Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over 15mm thick screed bed cement mortar (1:6) complete all as specified and as directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed

Material and labour for Vitrified tiles 8 to 9mm thick light shade area of each tile n exc 0.36sqm in floors, set and jointed and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

All as per Item No 14 above but as in vertical surfaces etc complee all as specified and directed.

Material and labour for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match existing surfaces over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for Glazed ceramic tiles (Coloured) 300X450X7 mm thick on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match Including screed bed 10 mm thick cement mortar 1:4 complete all as specified and directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed etc complete all as specified and as directed

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specifed and directed.

Material and labour for Brickwork with sub class 'B' bricks straight or curve on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

All as item No 20 above but except bricks complete all as specified and directed.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc to any radius in half brick thick walls built in built in CM 1:4 complete all as specifed and directed

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) incl removing of debries beyond the premises of site etccomplete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in coping with and including necessary formwork complete all as in specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base for path and hardstanding etc complete all as specified and as directed

Supply and fix for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

Material and labour for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in top layer for path and hardstanding, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

Material and labour for plain cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed.

Material and labour for Extra for ming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc all as specified and as directed. (Note: Only inner girth to be measured)

Material and labour for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed Notes: WPC shall be measured and paid seperately under relevant itesm

Material and labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed

Dismantling of stone slabs and tiles of and any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Material and labour for Marble work ( makrana white ) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrna Doogri/udaipur green over RCC slab including15 mm thick screed bed 1:4 complete all as specified and directed

Material and labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

All as per Item no 37 above, but as in vertical surface etc complete all as specified and as directed

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

Supply and fix for steel ventilators with top hung shutter including hinges, steel peg stay, complete etc complete all as specified and as directed

Supply and fix powder coated aluminium section (Minimium thickness of powder coating 50 micron) , Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 4 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter:- (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM complete all as specified and directed . Note:- 1. Two nos slide for glass and one no slide for wire cloth.

Supply and fix second class hard wood 35mm thick plain framed panlled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and style shall be as per IS: 1003 ( part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed

Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

Material and labour for Cutting holes in brick walls built in CM excd half brick but n.exc one brick for inserting holdfasts & making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 and finishing to match the existing finish complete all as specified and as directed.

Supply and fix butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed.

Supply and fix of butt hinges, medium weight, cold rolled stainless steel of 100 mm long complete all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolts of extruded section, 150mm long and fixed complete all as specified and as directed.

Supply and fix of aluminium handles, cast type anodised of 150 mm long complete all as specified and as directed.

Supply and fix aluminium alloy. anodised, sliding door bolt of 300 mm size with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as specified and directed.

Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Supply and fix 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor all as specified and directed.

Supply and fix 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and as directed.

Supply and fix 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

Supply and fix 4mm thick sheet figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

Supply and fix in repairs stainless steel plate rack of 0.85mm thick sheet, size 786mm x 914mm x 254 complete all as specified and as directed

Supply and fix in repairs 20 mm dia brass Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs Kitchen sinks with drainage board made of stainless steel 1mm thick (SS grade 304AISI 18/8 )IS embosed (IS:13983) glossy finish kitchen sink with plugs, washers and wastes Pipe 90 cm iong with CP waste coupling 40 mm dia ; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 940mm x 460mm bowl size 405mm x 354mm x 203mm complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed.

Supply and fix GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed.

Supply and fix GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed

Supply and fix in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, and fixed complete all as specified and directed.

Supply and fix in repair 10 Litres capacity, PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed

Supply and fix in repairs vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including barckets complete all as specified and directed.

Supply and fix in repair 15 mm bore dia pillar taps, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, etc complete all as specified and directed.

Supply and fix in repair 32mm dia waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed all as specified and as directed

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

Supply and fix in repair angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type including flange, screwed down, high pressure, screwed both Ends for Iron Pipe complete all as specified and as directed.

Supply and fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed

Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges including necessary aluminium brackets complete all as specified and as directed

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) com plete including provision of lime concrete bedding all as specified and directed.

Supply and fix in repairs 100 mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

Supply and fix in repair PVC bathroom mirror cabinet with 4 mm thick looking glass mirror of overall size 400x500 mm of approved colour and pattern all as specified and directed

Dismantling PVC/cement water tank n exc 1000 ltrs capacity complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 1000 liters capacity confiring to IS specification complete all as specified and as directed

Taking down cement plaster/cement mud plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc.

Material and labour for rendering 15mm thick internal in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 200ml/50 kg by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only".

Material and labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

Supply only water proofing compound (Liquid) complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer 1 mm wall care (putty) for making the surface even & smooth and applying two coats of acrylic distemper over a coat of alkali resistance primer including necessary cleaning splashes of paints from window panes and floor etc complete all as specified.

Material and labour for preparation of new plaster surface of wall and applying 2 coats of acrylic distember over a coat of alkali resistance primer over 1mm thick wall care putty etc complete all as specified and directed.

Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation of old decorated surface of ceiling applying one coat of white wash including necessary cleaning splashes of paints from window panes and floor etc complete.

Material and labour for Preparation of new plastered surface of wall etc and Finishing walls with Premium Acrylic Smooth exterior paint (Apex Ultima) with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over 1.00 mm thick external wall putty complete all as specified and directed.

Material and labour for complate scrapping of existing treatment of wall, Preparation of old surface of wall etc and Finishing walls with Premium Acrylic Smooth exterior paint (Apex Ultima) with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over 1.00 mm thick external wall putty complete all as specified and directed.

Dismantling structural steel work wrought iron or mild steel work including door, gates, of any description not otherwise provided for all as specified and dorected.

Supply and fix Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws with and including aluminium framed work in partition completed all as specified and directed.

Material and labour for 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work completed all as specified and directed.

Material and labour for 2nd class hard wood Plain fillets square or rectangular or tringular in section, clean wawn, secured with nails, screw or brads sectional area exc & n.exc 13 sqcm all as specified and as directed.

Supply and fix 30mm (Width of flaps (when open) in mm) Continuous (piano) hinges,mild steel, bright finish or electrogalvanised completed all as specified and directed.

Supply and fix 100mm size aluminium alloy handles, febricated type extruded section, ISI marked completed all as specified and directed.

Supply and fix Standard quality Magnatic catcher for cup board shutter completed all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Supply and fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls completed all as specified and directed.

Supply and fix 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls completed all as specified and directed.

Supply and fix in repair 110mm dia bore PVC (SWR) bends any radiucer completed all as specified and directed.

Supply and fix in repair 110 PVC mm (SWR) branch piece, single (single Y) equal or unequal with oval access door completed all as specified and directed.

Supply and fix in repair 110 PVC mm (SWR) branch piece, single equal or unequal completed all as specified and directed.

Supply and fix in repair 75 PVC mm (SWR) branch piece, single equal or unequal completed all as specified and directed.

Supply and fix in repair 100 PVC mm (SWR) junction single, (Single T) equal or unequal with oval access door completed all as specified and directed.

Supply and fix in repair 110 mm PVC (SWR) vent cowl completed all as specified and directed.

Supply and fix in repair 75 mm PVC (SWR) vent cowl completed all as specified and directed.

Supply and fix stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia bore of pipe.

Supply and fix stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia bore of pipe completed all as specified and directed.

Supply and fix in repairs grating doom 100 mm dia of PTMT ( Min wight 25 gms) complete all as specified and directed

Supply and fix in repairs grating doom 125 mm dia of PTMT ( Min wight 40 gms) complete all as specified and directed

Supply and fix in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed

Supply and fix in repair PVC (SWR) floor trap 75 mm with grating including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completed all as specified and directed.

Supply and fix in repairs Corner Glass Shelf of size 300 mm with chromium plated bracket guard and railing, complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for

Material and labour for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures to be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (v) Cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC Note : Depth exceeding 400 mm but not exceeding 450 mm

Supply and fix in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

Supply and fix in repair chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with rawl plug of size not less than 50 mm long etc complete all as specified and as directed

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and as directed

Material and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed

All as per item No 128 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as specified and as directed

All as per item serial No 128 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches.

All as per item serial No 128 here-in-before but One socket outlet 3 pin 6 Amp on independent board.

All as per item serial No 128 here-in-before but One light point controlled by two 2 - way switches

All as per item serial No 3 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

Supply and fix switch modular 6 amps 2 way I module complete all as specified and as directed.

Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked)

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix Buzzer, Ding Dong AC. 230 volts,single pole complete all as directed.

Supply and fix modular Bell push switch, 5 Amps 230 volt complete all as directed.

Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed

Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fix modular white cover plate with frame, 2 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 4 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 6 module complete all as specified and as directed

Supply and fix modular white cover plate with frame, 8 module complete all as specified and as directed

Supply and fix metal flush box 4 module for modular switches complete all as specified and as directed

Supply and fix metal flush box 6 module for modular switches complete all as specified and as directed

Supply and fix metal flush box 8 module for modular switches complete all as specified and as directed

Supply and fix metal flush box 1/2 module for modular switches complete all as specified and as directed

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed

Supply and fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way IP-43 with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed

Supply and fix in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed

Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and as directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container complete all as specified and as directed

Supply and fix in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed

Material and labour for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

M&L for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed.

Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing of excavated soil not exc 50cm anddepositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed.

S& F steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed

Cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed.

M.P.SUPPLY (BID ID -3397878)

M/S MANOJ PAUL (BID ID -3404788)

M/S Bharat Construction (BID ID -3397042)

R S TRADERS (BID ID -3404825)

V.V.Construction (BID ID -3404957)