PROVN OF DEFI VEHICLE PARKING SHED FOR BLDG NO. P-79 AND OVERHEAD SHED WITH PLINTH FOR FS SECTION AT MAIN GATE OF HQ CIF(K) AT SHARIFABAD MIL STN UNDER AGE(I) CIF(K)

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out hard/dense soil complete all as specified and directed by Engr -in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregates ) in foundation filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of gauge broken boulders & stone n.exc 63mm, deposited,spread and levelled in layers n.exc 15 cm thick, watered and rammed in two layers to a true surface complete all as specified and directed by Engr -in-Charge.

M & L for 100 mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) including necessary form work as in flooring, complete all as specified.

M & L for 50 mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) including necessary form work as in flooring, complete all as specified.

M&L for machine pressed precast coloured concrete interlocking paver blocks any shape and size conforming of IS 15658: 2006 of 80mm thick, M-40 grade, laid and jointed with grey cement and pigment, complete all as specified and directed.

M & L 25mm thick Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed by Engr-in-Charge.

M&L plain cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) as in mass concrete and foundation filling complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B-1using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint complete all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified

S&F 1.25mm mild steel, plain, black sheet in ridges, hips, valley gutters, drip and straight flashings with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description, over 10 cm in width or girth over a coat of red oxide primer complete all as specified and directed by Engr -in-Charge.

S&F Steel work as in tubular section for post, purlins etc including special shaped washer, angle cleat, holdfast, gusset plate etc., complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats Gusset plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge.

Returning, filling in trenches including spreading levelling, watering well, ramming in layers n.exc 25cm in soft/loose soil (from available soil) all as specified and directed by Engr-in-Charge.

Removing excavated material ( soils ) exc 250 mtr but n exc 500m depositing where directed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM(1:6) complete all as specified and directed by Engr-in -charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM(1:4) complete all as specified and directed by Engr-in -charge.

M&L for Cutting holes n exc 150 sq. cm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required

M/S RATHER STEEL WORKS (BID ID -3292458)

M/S MOHAMAD YOUSUF AKHOON AND SONS (BID ID -3296360)

M/S M.S TANVEER ENTERPRISES (BID ID -3292387)