SPECIAL REPAIR TO GOVT MD ACCN NO P 597 01 TO 08 OF FD HOSPITAL AT MIL STN ALWAR

Demolition of brick or stone masonry built in cement or lime mortar of any mix, including quoins, pillars, ashlar masonry and all embedded portions, carefully dismantling and removing the demolished material from the site, including stacking of any serviceable material as directed by the Engineer-in-Charge, complete all as specified.

M&L brickwork with burnt clay fly ash building bricks conforming to IS 13757 (1993), old size bricks, laid straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6, including preparation of bed, laying bricks in proper bond, filling and striking joints, raking joints where required, scaffolding, curing and all incidental operations, complete all as specified and directed by the Engineer-in-Charge.

M&L half-brick-thick brickwork with burnt clay fly ash building bricks conforming to IS 13757 (1993), old size bricks, laid straight or curved on plan to any radius, built in cement mortar 1:4, including cutting and fitting of bricks, proper bonding, filling joints, scaffolding, curing and all incidental operations, complete all as specified and directed by the Engineer-in-Charge.

Demolition of unreinforced cement concrete in ground floors and paving, not exceeding 15 cm thickness, below or above ground level, including breaking concrete into manageable pieces, removal of demolished material and rubbish from the premises, and leaving the surface clean and ready for subsequent work, complete all as specified and directed by the Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and similar surfaces, laid, bedded and pointed in any mortar, including careful removal, segregation and stacking of serviceable slabs and tiles at the location directed by the Engineer-in-Charge, and removal of unserviceable material and debris from the premises, complete all as specified and directed.

Taking down chowkhats or frames complete with shutters, without removing shutters from the frames, each exceeding 1.5 sqm but not exceeding 4 sqm in area, including removal of fixing holdfasts and fasteners where necessary, careful dismantling without avoidable damage to adjoining masonry, and removing the frames and shutters to store as directed by the Engineer-in-Charge, complete all as specified.

Taking down chowkhats or frames complete with shutters, without removing shutters from the frames, each not exceeding 1.5 sqm in area, including removal of fixing holdfasts and fasteners where necessary, careful dismantling without avoidable damage to adjoining masonry, and removing the frames and shutters to store as directed by the Engineer-in-Charge, complete all as specified.

Dismantling floor, hearth or wall tiling, including cement mortar bedding but excluding backing, carefully removing serviceable tiles without breakage as far as practicable and stacking them at the store specified by the Engineer-in-Charge, including removal of unserviceable tiles, bedding material and debris from the premises, complete all as specified and directed.

Dismantling and removing water storage tanks of capacity exceeding 250 litres but not exceeding 500 litres, including disconnection from existing inlet, outlet and overflow connections, removal of supports and fixing arrangements where required, lowering safely to ground level and transporting the dismantled tank from the site to the location directed by the Engineer-in-Charge, complete all as specified and directed.

M&L solid PVC door frame, size 50 mm × 47 mm, manufactured from 5 mm thick plain-colour PVC sheet/profile reinforced with MS square tube, including cutting and mitring to required dimensions, forming joints, providing necessary fixing arrangements, positioning, plumbing, levelling and alignment in the prepared opening, fixing with suitable fasteners and making good disturbed surfaces, complete as per approved drawings, manufacturer’s recommendations and directions of the Engineer-in-Charge.