Repairing of 16 Seated Public Toilet Near Kashinath Jangi Chawl At Devjinagar Narpoli in Ward No.18 Bhiwandi. GOV MLA FUND

Reapiring of 16 Seated Public Toilet Near Kashinath Jangi Chawl At Devjinagar Narpoli in Ward No.18 Bhiwandi. (GOV MLA FUND)

Dismantling brick masonry in lime or cement mortar and stacking the metrils as directed with all lead.lift etc. 1547/46.09

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto adistance of 50 metres or spreading in the compound and cleaning the site etc. complete. 984/32.33

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 1557 / 46.19

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 892/27.05

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete 881/26.46

Providing & fixing factory-made steel door of Single leaf External Plain Wood finish type witha.) frameof size 100 x 58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hard ware mounting plates and Polyurethane foam infillb.) Shutter of thickness 46 mm made of 0.8 mm thicks lip coated pre-galvanized steel sheet on both sides conforming to ASTMA 527 / ASTMA 525, BS 29891994 ,IS 277, Zinc coating 120 GSM .Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge reinforcing hardware mounting plates and lock protection with Honey comb craft paper in fill of thickness 150 GSM of load bearing capacity 500 Kilogram/One Square Metre.) Finish: Powder coated surface finished with thermo setting polyurethane paint of Aliphatic grade of thickness 60-micrond.) Accessories: Min 8 Anchor fastener of HILTImake, min 3 SS Ball Bearing Butt Hinges of Dorsetmake, Dorset Mortise lock, SS Tower bolt of 200 mm size, Eye hole, Door stopper complete. Sizes up to 1200 x2439 mm 1917/51.92

Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, bracesetc. and including one coat of anticorrosive paint and over it twocoats of oil painting of approved quality and shade etc. complete. 816/23.01

Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete.1147/38.07

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. 963/32.11