SPL REPAIRS TO BLDG NO P-12 AND P-15 OF RAJ RIF AND PROVN OF UNDERGROUND WATER STORAGE TANK AT RAJ RIF AT DIPATOLI POCKET UNDER GE DIPATOLI

Amount

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured & Paid seperately) on wall finishing the surfaces even and smooth without using extra cementcomplete all as specified and directed.

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 3mm thick wall care putty on ceiling and making smooth surface as entire satisfaction of Engineer-in-Charge complete all as specified and directed

Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 3mm thick wall care putty on ceiling and making smooth surface as entire satisfaction of Engineer-in-Charge complete all as specified and directed

Preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 3mm thick wall care putty on walls and making smooth surface as entire satisfaction of Engineer-in-Charge complete all as specified and directed

Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 3mm thick wall care putty on walls and making smooth surface as entire satisfaction of Engineer-in-Charge complete on all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted over a coat of exterior primer on walls/soffit of chajja surfaces complete all as specified directed.

Complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted over a coat a exterior primer on walls/soffit of chajja surfaces complete all as specified directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed , complete all as directed.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4.00 Sqm each with shutter without taking off shutter from frame complete and removing from site, complete all as directed.

Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as directed.

M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed.

M&L for 2nd class hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and directed.

M&L for 2nd class hardwood of sectional area exc.13 & n.exc 25 sqcm in plain fillets,square rectangular in section,clean sawn,secured with nails complete all as specified and directed.

M/L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F powder coated anodised aluminium ventilator louvre type with frame of frame of powder coated anodised aluminium section weighing 0.55 kg/m including 5mm thick coloured glass and stainless steel wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed.

S&F powder coated Aluminium anodised hanging type glazed window manufactured with approved aluminium section with two hang shutters each shutter width same of the length of window with the following specifiecation and making good the adjascent surfaces :- (a) Two Nos Window frame of each window side by side of grill of cross section 50.5mmx40mmx1.5mm thick over all size 101mmx40mmx1.5mm thick, . (b) hanging type smooth shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) hanging shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for one shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos aluminium handle/tower bolt per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design. (Note: Window will be measured outer to outer frame and no extra to be paid. The grill will be fixed between the two window frame. window iron grill will be measured and paid separately in respective item.

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames, complete all as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos butt hinges100 mm long for each door , complete all as specified and directed.

S&F in repairs galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm, complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled MS and fixed , complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt extruded section, complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long , complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long, complete all as specified and directed.

M&L for applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the, complete all and directed.

M&L for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 , complete all as specified and directed.

All as item No 37 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded , complete all as specified and directed.

M&l for machine cut kota stone slab 20-25mm thick polished one side for flooring over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and directed.

All as item No 42 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection etc, laid to slope of 1:12 and shall be laid in alternate bays n. exc 1.5 m in length, joints 20 mm wide will be provided every 1.5m and filled with ceiling compound grade 'A' the joints between external wall and plinth protection shall also be laid with ceiling compound grade 'A', finished cement concrete surface even and smooth all as specified.

M&L for repair and rendering 10mm thick in CM 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded stone aggregate including necessary scafolding work for double/single storey bldgs all as directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in sunken floor .average thickness 50mm and making adequate slop towards spout pipe etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with WPC (WPC will be measured and paid seperately) complete all as directed.

M&L for PCC (1:5:10) type E2 using 40mm graded brick aggregate as in sunken portion , complete all as specified and directed.

S&F 32 mm dia GI spout light grade for sunken portion complete all as directed at site, complete all as specified and directed.

M&L for bitumen blown 85/25 grade applied hot two coats to concrete surfaces at rate of 1.2 Kg/sqm per coat, complete all as specified and directed.

M&L for polythene film black 200 micron laid in floors etc, complete all as specified and directed.

Dismantling of existing water tanks and removinging from site and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) not less than two layers hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth, complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore , complete all as specified and directed.

All as per item No 57 above but for 20 mm bore pipe, complete all as specified and directed.

S&F GI steel tubing and connection tubing 15mm bore in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc, complete all as specified and directed.

All as above item No 59 here-in-before but for 20 mm bore , complete all as specified and directed.

S&F 15 mm bore Angle/Stop valves, fancy type chromium plated, or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and directed.

S&F in repair, 15mm bore bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and directed.

S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed.

S&F in repairs pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed

S&F in repair Vitreous China urinals, bowl type flat back, size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including 32mm dia waste pipe fitted complete all as specified and directed

S&F brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed

S&F in repair 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site , complete all and directed.

S&F 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 100mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof , complete all as specified and directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 75mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed.

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed..

S&F 110 mm bore PVC (SWR) vent cowl , complete all as specified and directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement , complete all as specified and directed.

S&F 110mm dia PVC (SWR) WC connector with lip ring , complete all as specified and directed.

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed.

S&F in repairs vitreous china wash down water closet pan (Padestral Pattern) white with 'P' or 'S' trap excluding flushing cistern and flush pipe , complete all as specified and directed.

S&F in repairs CP soap dish approximate size 160x160x90mm , complete all as specified and directed.

Excavating over areas in any type of soil, n exc 1.5 m deep and getting out complete all as as directed.

All as per item No 87 here-in-before but exc 1.5m and not exc 3 mtr deep.

M&L for broken stone hard core of gause n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete and packing of post etc .

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50 M and depositing wheredirected at a level not exceeding 1.5M above the starting point complete all as speecified and as directed.

M&L for RCC 1:1.5:3 type A-1 nominal mix using 20 mm graded stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete , complete all as specified and directed.

Use and waste of formwork rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter , complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 nominal mix using 20 mm graded stone aggregate for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses , complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter , complete all as specified and directed.

M&L RCC 1:1.5:3 nominal mix using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like , complete all as specified and directed.

Formwork to edges of concrete flats,treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and directed.

M & L for PCC (1:2:4), type B-1 using 40mm graded stone aggregate as in roof kerb, surface channel of drain or mud stops, rounded or chamfered on edges type complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 100 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:3) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement , complete all as specified and directed.

M & L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base to floor finish, complete all as specified and directed.

M & L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring with using WPC and finishing the surfaces even and smooth without using extra cement. Note:WPC shall be paid and measured sepretelly , complete all as specified and directed.

S&F 25mm bore CI steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site all as specified.

M&L for pressed precast concrete interlocking paver block any shape and size confirming toIS 15658-2006 of 60mm thick M-35 grade with gray cement and pigment complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation , complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

M&L for point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia medium grade on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 112 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 112 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 112 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No 112 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed at site.

S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.

M&L for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia medium grade as per site requirement along walls/ceiling etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No 125 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site.

Supply and fix MCCB DB TPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed at site.

S&F Lienear & compact 9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed at site.

S&F Decorative wall light fitting CT2 10 W made up of polycarbonate, complete all as specified and directed at site.

S&F for highly efficient LED bulbs, 10 W complete all as specified and derected

S&F water heater storage type, electric, capacity 25 litres including connection pipe and all accessories as directed complete all as specified and directed.

S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed.

S&F in replacement of building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed.

M&L for repair and greshing of ceiling fan of any size sweep single phase. Ceiling fan of any size opening from any height or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshing with required necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louver shutter single phase, 230 V, 50 Hz, 300 mm sweep complete including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

Supply, Laying ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable including taking out old cable complete all as specified all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.

Supply and laying sand cushioning with dry clean river sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thick thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of depth not less than 0.90x 0.60 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size 25x3 mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers ,testing of completion (drawn in earth lead protection pipe light gade GI of size 32/40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I connected to earthing lead with Main switch/main control board,filling with charcoal dust 200 Kg, and common salt 100 KG , including necessary excavation and earth work in any type of soil ,perforated watering pipe,funnel with wire mesh,earth lead protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 8 mm dia TMT bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm top of GI Plate.

M/S.R.S.Chauhan and Sons (BID ID -3331863)

M/S CITY ENTERPRISES (BID ID -3342549)

arics infrastructure (BID ID -3332931)

M/s Animesh Kumar & Co. (BID ID -3347329)

M/S RANKWAR CONSTRUCTION (BID ID -3335771)

Ranchi Construction Company (BID ID -3338694)

universal enterprises (BID ID -3345524)

M/s Kundu Enterprises (BID ID -3331550)

ashiyana electrical company (BID ID -3346852)

M/S AMOD KUMAR PANDEY (BID ID -3338419)