Construction Improvement of storm water drain at various places, Construction Improvement of Roads at various places and Construction of Retaining wall at various places in Ward No.02 of Quepem Municipal Council

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50m lead.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed

All kinds of soil

Transportation and carriage of materials (A) By tipper truck including loading, unloading and stacking (A) Lime,building rubbish, manure sludge, moorum excavated rock ( i ) Lime,moorum, building rubbish earth upto 5 km.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Providing and laying in position cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40m nominal size) excluding cost of centering, shuttering and finishing:

All works upto plinth level

In retaining walls, return walls (any thick) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.

Centering and shuttering including strutting, propping etc. and removal of formwork for:

Foundations, footings, bases for columns and mass concrete.

vertical surfaces such as retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, etc.

Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge.

110 mm dia

Providing and laying 50 mm (consolidated thickness ) full grout using granitic or basaltic stone of specified grading at 6.00 cu.m per 100 sqm.grouting with hot bitumen straight run bitumen ( or with such bituminous material of grade and type as specified by the Engineer in charge ) at 5.0 kg per sq.m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq .m. including providing and laying seal coat sealing the voids in a bituminous surface laid with F.E loader with 1.cu.m bucket capacity to the specified levels .grade and cross fall using Type A seal coat with 0.98 kg/sqm. of bitumen of grade as per MORTH&H specification clause 513

Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.

Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity

Steel work welded in built up section and framed work including cutting, hoisting, fixing in position for steel grating of size 2.00 m x 0.90 m with R.S. joists, Tees, angles, flats and channels of TATA/ SAIL/ VIZAG make only with structural steel not less than 163.6 kg. per unit including applying priming coat of red lead paint and two or more coats with superior quality ready mixed paint for steel work of approved brand and Manufacture in all shades on new work to give an even shade as per the approved drawing and direction of the Engineer in-charge.

Please Enable Macros to View BoQ information