134/MID/AN

Gate on RD 330 ( D-1 ):Restoration / Strengthening / Replacement of components of the gate of size 4’ x 2’6” by way of gas cutting of old rusted bottom channel of size 3” x 1.5’’, P/F of new channel. Repairs to 3T winch machine by way of providing / fixing of new machined stem rod and rain pipe, replacement of internal gear system. Replacement of the fasteners, re-installation of the gate inside the groove after complete reconditioning. Providing / laying of cement concrete for anchoring of the gate top channels for securing it properly. Complete painting of the entire gate at site with enamel paint.

Servicing/greasing of winch machines of summer and winter regulatory gates by way of dismantling/opening the gear box. Cleaning the whole gear box with K. Oil at site with the help iron brush and then applying of sufficient amount of grease to each gear. Opening the covers of rope hoist drums and cleaning of drums by applying k. oil and then cleaning the rope hoist drums with help of iron wire brush and then applying the grease to both drums. Opening the side cover plates of 02 no. bearings, removing the old grease / dust from both the bearings, cleaning the bearings with recommended chemical cleaner and applying new grease to both the bearings and then fitting of the cover plates of the bearings. Removing of all foreign material from rope, by means of wire brush, applying of grease to the rope etc. Complete painting of the top cover of the hoist machine including gear box of summer and winter gates by scrubbing, removal of old rust, then applying two coats of anticorrosive enamel paint.. Complete job including cost of material, labour and hire charges of tools and tackles required during the execution of the job etc.

Gate on RD 889:Extraction of the gate of size 5’ x 3’ outside the frame using chain pulley block, tripod stand & manual labour, for restoration / strengthening / reconditioning. Repairs of the gate by way of providing / fixing new stem rod, gears, bearing to 3T winch machine. Re-installation of the gate inside the groove, greasing, Complete painting of the entire gate at site by enamel paint.

Gate on RD 3730: Fabrication/ Installation of various components of regulatory gate of size 4’.7” x 2’.8” by way of providing / fixing p/f of new winch machine of (3T) capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. providing / fixing of new rubber seal on the bottom of the leaf, re-installation of the gate inside the groove. Complete painting of the entire gate at site with enamel paint. Complete job includes cost of material, labour charges, head load, hire charges of tool and tackles, transportation charges.

Gate D-4. Fabrication/ Installation of various components of regulatory gate of size 4’ x 2’ by way of providing / fixing p/f of new winch machine of (3T) capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. providing / fixing of new rubber seal on the bottom of the leaf, re-installation of the gate inside the groove. Complete painting of the entire gate at site with enamel paint. Complete job includes cost of material, labour charges, head load, hire charges of tool and tackles, transportation charges.

Gate on RD 5200:- Fabrication/ Installation of various components of regulatory gate of size 6’.8” x 3’.4” extraction of the gate outside the frame by using chain pulley block, tripod stand & manual labour, for restoration / strengthening / reconditioning. p/f of new winch machine of (3T) capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Re-installation of the gate inside the groove, greasing, Complete painting of the entire gate at site by enamel paint.Complete job includes cost of material, labour charges, head load, hire charges of tool and tackles, transportation charges.

R K Electrical and Engineering Works

Chargotra Trading Co.