Renovation of Hotel Hamir and Construction of wayside amenities at Nadaun and Dosadka Shifted to Hamirpur Distt. Hamirpur H.P.

Amount

Excavation in foundations, trenches etc., in all kinds of soil such as pick work, jumper work, saturated and un saturated soil and earth work, lift upto 1.50 Metres, stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cms. layers, when required in to plinths,sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of dumping site including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts as direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling up floor two level and removal of the same for insitu-reinforced including carriage of material in all leads and lifts. (a)Foundation, footings basis of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. In thickness.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing.

Beams, cantilever, girders andlintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in Walls including attached buttresses,pilasters and their caps and bases string courses etc. upto floor two level including carriage of material in all leads and lifts

Providing and laying cement concrete 1:4:8 in foudation and plinth (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work including carriage of material in all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work including carriage of material in all leads and lifts as per the direction of the Engineer-in-charge. (a)Foundation footings bases of columns and the like and mass concrete.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Column, pillars, posts and struts upto floor two level :

Stair cases (except spiral stair case) including landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level including carriage of material in all leads and lifts as per the direction of by the Engineer-in-charge : Tor Steel.

Brick work using common burnt clay building bricks in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all heights , curing complete including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Half brick masonry in common burnt clay building First Class Bricks in Cement Mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts as directed by the Engineer-in-charge

Brick bat filling in depression portion like wc/ carbling area including carriage of material in all leads and lifts.

Stone soling properly handpacked filling interstices with spalls and consolidating under floor complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) including carriage of material in all leads and lifts.

Providing wood work 1st class Deodar wood in frames of doors,windows, clerestory,windows and other frames wrought,framedand fixed in position including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 40mm thick 1st class Deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 40mm thick 1st class Deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Supplying and fixing 4mm thick glass panes with 1st class deodar wooden beading 20x12mm including removal of broken glass panes wherever necessary including carriage of materials in all leads and lifts.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 75x75mm. Cornics plain square edged cover fillets (beading) section, with wood screws in ceiling and lining including mitring at junction. 1st class deodar wood including carriage of materials in all leads and lifts.

Providing and fixing 1st class deodar wood plain square edged cover fillets (beading) 50mmx12mm section, with wood screws in ceiling and lining including mitring at junction including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 19mm thick water proof commercial board (Merino / green ply/ Kit ply make) in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 19mm thick Commercial Board (Merino / green ply/ Kit ply make) water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 4mm thick burl ply of (Merino / green ply/ Kit ply make) and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing cup board by using 19 mm water proofing and anti termite board of approved manufacture Kit ply/ Green ply/ Marino make (As per drawing ) and direction of Engineer in Charge for shutters, vertical and horizontal partitions (teak board) etc. and fixing 6 mm thick water proof ply backing, painting/polishing, Ist class deodar wood beading, moulding, brass handles, cachers M.S. piano hinges and backing with 4 mm thick ply sheet complete and as per the direction of the Engineer-in-Charge including carriage of materials in all leads and lifts .( only length and hight to be measured)

Providing and fixing bright finished brass sliding door-bolts Paragon/ Floora/ Everlite make or equivalent as approved by the Engineer -in-charge with nuts and screws etc. complete as approoved by Engineer in charge including carriage of material in all leads and lifts 300x15 mm

Providing fixing bright finished brass tower bolts (barrel type) Paragon/ Floora/ Everlite make or equivalent as approved by the Engineer -in-charge with screws etc. complete as approoved by Engineer in charge including carriage of material in all leads and lifts. (a)200x10 mm

Providing and fixing bright finished brass handles with screws etc. Paragon/ Floora/ Everlite make or equivalent as approved by the Engineer -in-charge complete as approoved by Engineer in charge including carriage of material in all leads and lifts. (a) 125mm

Providing and fixing 150 mm bright finished hard drawn hooks and eyes Paragon/ Floora/ Everlite make or equivalent as approved by the Engineer -in-charge including carriage of material in all leads and lifts.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion Paragon/ Floora/ Everlite make or equivalent as approved by the Engineer -in-charge screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door Godrej /Universal/ Everlite make or equivalent as approved by the Engineer -in-charge including cost of cutting floor as required embedding in floors and cover plates etc. complete i/c making good the floors including carriage of material in all leads and lifts.

Providing and fixing M.S. grills of required patterns as approved by the Engineer -in-charge in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including carriage of material in all leads and lifts

Providing and fixing Sakarni/JB Hisar/ Adhar shree POP false ceiling consisting of frame GI channel main cross and L & hanging member of heavy quality size & shape with wire gauge mesh applying POP to the expended metal of thickness 10mm thick finish smooth to line and level and design as per the direction of Enginner in charge including carriage of materials in all leads lifts and heights

Coloured glazed tiles 8 mm thick in skirting risers of steps and dado 12 mm thick 600x300mm Nitco/ Kajaria/ RAk or equivalent as approved by Engineer in Charge cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 8 to 10 mm thick coloured ceramic tiles tiles Kazaria/ Nitco or equivalent as approved by Engineer in Charge make 600x300 mm of approved shade and quality in skirting laid over 12 mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment as required complete. (Basic rate not less than Rs.65 per Sq.ft.).

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant or equivalent as approved by Engineer in Charge 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.(Basic Rate not less Than 65/- Per Sqft.)

Providing and laying Duro stone vetrified tiles (600x150mmx8mm) in wooden shade Kajaria/ Nitco/ RAK or equivalent as approved by Engineer in Charge in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Basic rate not less than Rs.70.00 Sqft.)

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured Kajaria/ Nitco/ RAK or equivalent as approved by Engineer in Charge of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(Basic rate not less than Rs.70.00 Sqft.)

Applying anti termite treatment with medicine of approved quality and sealing material including complete in all respect as per the direction of Engineer in Charge with warrantee of two years including carriage of material upto all leads and lifts

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick White makrana marble including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing 75 mm x 60mm rounded hand rails in straight length complete in. 1st class indian teak wood including carriage of material upto all leads and lifts

Providing and fixing 75 mm x 60 mm caps turned to match the hand rails and mitred in including hand rails screws and dowels (dia of cap to be twice the width of hand rail) including carriage of material upto all leads and lifts 1st class indian teak wood.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts as directed by the Engineer-in-charge. a) Cement mortar 1:4 (1 cement:4 sand).

6mm Cement plaster to ceiling including carriage of material in all leads and lifts as directed by the Engineer-in-charge. (a) In Cement mortar 1:3(1 Cement:3 Sand)

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of material in all leads and lifts.

Applying priming coat on new concrete/ masonry/ asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required including carriage of material in all leads and lifts as directed by the Engineer-in-charge with :- a) Readymixed primer

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Polishing two coats with french polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Wall Painting ( one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease, loose pieces of scale and sand papered smooth including applying of putty a required for making the surface including carriage of materials in all lead and lifts.

Extra for every subsequent coat of plastic emulsion paint including carriage of materials in all lead lifts and heights.

20mm cement plaster in two coats backing coat 10mm and finishing coat 10mm thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all lead, lift and height in Cement Mortar 1:6 (1 Cement:6 Sand)

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) including carriage of material in all leads and lifts as directed by the Engineer-in-charge.

Dismantling cement asbestos celotax/ hard board in ceiling or partition wall including stacking of serviceable materials in specified diamensions and disposal of unserviceable materials as per the direction of Enginner in Charge (frame work such as joists, beams to be measured and paid for separately).

Dismantling tiled floors laid in mortar upto floor two level and abvoe including stacking of serviceable materials and disposal of un-serviceable materials thorugh manual and mechanical means all lead and lifts and stacking the servieable materials in specified manners as per the direction of Enginner In Charge . For thickness of tiles upto 25

Demolition below ground level in all depth and disposal of unserviceable materials within all leads and lifts by manual and mechanical means and shorting the useful materials I specified manners as per the direction of Engineer in Charge. Un reinforced cement concrete.

Demolition of brick work above GL upto two floor level including stacking of serviceable material and disposal of un-serviceable material within all leads and lifts through manual and mechincal means as per the direction of Engineer in Charge upto approved dumping site.

Water Supply & Sanitary Installation Providing and fixing to wall ceiling and floor galvanised mild steel tubes (heavy grade) tube fittings and clamps including carriage of material upto all leads and lifts (TATA/Jindal Make) (a) 15mm nominal size

(b) 20mm dia

©32 mm dia

Providing and fixing brass full way valve with wheel Zolato/ Leader make or equivalent aas approved by Engineer in Charge including carriage of materials in all leads & lifts (i) 15mm nominal

(ii) 20mm nominal

Providing and fixing on wall face PVC (D-plast)/ Finolex/Supreme make soil & waste pipes of working pressure not less than 4.5kg/sq.cm including filling the joints with approved adhesive complete including carriage of materials to all lifts and leads as per the drawings, specifications and directions of Engineer. a) 75mm dia

b) 110mm dia pipes-finds/d-Plast

Providing and fixing 110mm dia PVC CLIPS/clamps of approved design to pvc rain water pipes embedded in wall etc. including carriage of material upto all leads and lifts

Providing and fixing PVC CLIPS/clamps of approved design to pvc rain water pipes embedded in wall etc. including carriage of material upto all leads and lifts 75mm dia

Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material upto all leads and lifts (a) 75mm dia

Providing and fixing on wall face PVC(D- Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material upto all leads and lifts (a) (i) Plain bend 110mm dia

(ii)Plain bend 75mm dia

(b) (i) Door bend 110mm dia

(ii)Door bend 75mm

(c)Collar (i) 75mm nominal size

(ii) 110 nominal size

Providing and fixing C.P. brass angle valve 15 mm florentine series of jaquar make cat no.- 5053N as approved by the Engineer-in-Charge including carriage of material in all leads and lifts. (a) 15 mm dia.

Providing and fixing studio set Jaquar make Solo series Cat No.- 6853S, 6851P, 6851S wash down water closet (European type W.C. pan) Or Equvalent series of Hindaware/ Cera make as approved by the Engineer in Charge with integral “P” or “S” conversion bend, seat cover premilina, cisteren with fittings complete or equivalent Series of Cera/ Hindware in all respect including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) of pastel including carriage of material in all leads & lifts.

Providing and fixing snow white viterous Urinal Jaquar make Cat No. 132530 or equivalent Series of Cera/ Hindware as approved by the Engineer in Charge with all fitting such as unions, clamps etc.(all in C.P. brass) including cutting of holes and making good the same 15mm nominal bore (confirming to BIS Specification).

Providing and fixing Jaquar make florentine series Cat No.- 5701 wash basin or equivalent Series of Cera/ Hindware as approved by the Engineer in Charge under counter complete in all respect, including carriage of material in all lead and lifts.

Providing and fixing C.P. soap dish with bracket fixed to wooden cleats Jaquar make Cat No. AQN 7731or equivalent Series of JAL / Cera make as approved by the Engineer in Charge including carriage of materials in all lead and lifts.

Providing and fixing C.P. brass Jaquar make Cat no.- 35753P toilet paper holder of spin collection or equivalent Series of JAL/ Cera make as approved by the Engineer in Charge with bracket fixed with rawl plug and screws including carriage of material in all leads and lifts.

Providing and fixing C.P. Jaquar make Cat No.- ALD-727 brass waste equivalent Series of JAL/ Cera make as approved by the Engineer in Charge for wash basin and sink including carriage of material in all lead and lifts

Providing and fixing C.P. Jaquar make 32 bottle trap Cat No.- ALD- 769L300x190 brass bottle trap 32 mm dia for wash basin and sink equivalent Series of JAL/ Cera make as approved by the Engineer in Charge including carriage of material in all lead and lifts.

Providing and fixing C.P. Brass bib cock with Capstan Head 15mm dia Jaquar make florentine series Cat No.- 5047N as approved by the Engineer in Charge including carriage of material in all leads and lifts.

Providing and fixing 15 mm bore one hole basin mixer florentine series jaquar make Cat No. 5001B equivalent Series of JAL/ Cera make as approved by the Engineer-in-Charge including carriage of material in all leads and lifts. (a) 15 mm dia

Providing and fixing 1500mmx1000mm bevelled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C.sheet of plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads and lifts ( confirming to BIS Specifications).

Providing and fixing C.P. connection pipe Jaquar make Cat No. 801B & 805B or equivalent Series of JAL/ Cera make as approved by the Engineer in Charge with brass unions including carriage of material in all leads and lifts 45 cm length.

Providing and fixing on 110mm dia pipes wall face PVC (D-Plast) /Finolex/ Supreme approved by the Engineer in Charge rain water pipes of working pressure not less than 4.5 kg/Per square Metre including filling the joints with approved adhesive complete. as approved by the Engineer in Charge

Providing and fixing of G.I. / M.I. unions. approved by the Engineer in Charge 15mm including carriage of material in all lead and lits. 600mm long.

Providing and fixing Towel rail (C.P. Brass) Jaquar make Cat No. AQN-7711A with a pair of C.P. brass brackets to fit the size of towel rail or equivalent Series of JAL/ Cera make approved by the Engineer in Charge complete including carriage of material in all lead and lits. 600mm long.

Providing and fixing C.P. Jaquar make health faucet Cat.No. ALD-573 or equivalent Series of JAL/ Cera make approved by the Engineer in Charge complete including carriage of material in all lead and lits.

Providing & fixing C.P. grating heavy duty (Chilly Make) including carriage Nova make or approved by the Engineer in Charger including carriage of material in all lead and lits.

Providing and fixing wall mixer with provision of overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges florentine series jaquar make Cat No. 5273UPR or equivalent Series of JAL/ Cera make as approved by the Engineer-in-Charge including carriage of material in all leads and lifts. (a) 15 mm dia

Providing and fixing Towel Rack with 3 hooks Jaquar make Cat No. 1181FHN or equivalent Series of JAL/ Cera make approved by the Engineer in Charge with a pair of C.P. brass brackets to fit the size of towel rack complete including carriage of material in all lead and lits. 600mm long.

Providing and fixing Over Head Shower 150 x 150mm squarel shape single flow Jaquar make Cat No. 35495 or equivalent Series of JAL/ Cera make approved by the Engineer in Charge complete including carriage of material in all lead and lits.

Providing and fixing C.P. Soap Dispenser with Metallic Bottle Jaquar make Cat No. 1137N or equivalent Series of JAL/ Cera make approved by the Engineer in Charge complete including carriage of material in all lead and lits.

Providing and fixing C.P. Pillar Cock with lift type operating Knob & Base Flange Jaquar make florentine series Cat No.- 5015 or equivalent Series of JAL/ Cera make approved by the Engineer in Charge including carriage of material in all leads and lifts.

Providing and fixing Regular body of cobncealed stop cock suitable for 15mm pipe line with protection cap (without exposed parts) Jaquar make Cat No.- ALD-083 or equivalent Series of JAL/ Cera make including carriage of material in all leads and lifts.

Providing and fixing Exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal (compatible with ALD- 083) Jaquar make florentine series Cat No.- 5083NK or equivalent Series of JAL/ Cera make approved by the Engineer in Chargeincluding carriage of material in all leads and lifts.

Providing and fixing C.P. Double Coat Hook Jaquar make Cat No. AQN-7761 or equivalent Series of JAL/ Cera make approved by the Engineer in Charge complete including carriage of material in all lead and lits.

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, metling of lead and making into blocks including stacking of unservicable materails through manual and mechanicla means with in all leads and lifts. 80mm dia

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, metling of lead and making into blocks including stacking of unservicable materails through manual and mechanicla means with in all leads and lifts. 100mm dia

Taking out WC, wash basin , looking mirror, taps, wall mixer wash basin mixer, soap tray all accessories including handed over the all servicable materials to Engineer in Charge and disposal of all unservicable materails in all leads and lifts.

Electrical Installation Providing and fixing recess mounting decorative high efficient luminaire with 1201m/w, immaculate plus 2'-00x2'-00Wipro make Cat No. CRCO10r018HP57HE 18W led panel or equivalent seires of Philips/ Bajaj make complete with all required accessries, connections, testing and commissioning etc. as required inculding carriage of materails in all leads and lifts.

Providing and fixing recess mounting decorative Ultra sleek recess mounted slim round downlighter Wipro make Cat No. LD80-200XXX-60XX3W led or equivalent series of Philips/ Bajaj/ Wipro make complete with all required accessries, connections, testing and commissioning etc. as required inculding carriage of materails in all leads and lifts.

HANS CONSTRUCTIONS

SANJAY SHARMA