Four Laning to Ring Road In Baramati City SH122 KM7/600 to 14/500(Part Medad Ayurvedic Medical Colledge to Rajmata Ahilyadevi Holkar Government Medical Colledge)And Construction of Major Bridge on Karha River Tal.Baramati,Dist.Pune (Excluding Bridge)

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 milimetre in thickness.

Picking the Black Top road surface including sectioning complete.

Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering complete.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources).

Conveying material obtained from road cutting including all lifts, laying in layers of 20 cm to 30 cm breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m to 500m inclusive from the site of excavation to the site of deposition as directed

Construction of granular sub-base by Plant Mix Method by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site,spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.For Grading I Material.

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Laying By Grader/Paver.

Providing and applying primer coat with bitumen emulsion on prepared surface of Granular Base including clearing of road surface and spraying primer at the rate of 0.60 kilogram/Square Metre using mechanical means.

Proving and laying Dense Bituminous Macadam using crushed aggregates of grading 1, premixed with bituminous binder VG-30 bitumen at the rate 4.50 percent by weight of total mix and filler, transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 76-100 milimetrem compacted thickness, using Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory Roller with Stone Dust filler.

Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumen with sprayer on dry/hungry Black Top surface at 3.00 kilogram per 10 Square Metre using VG-30 grade bulk bitumen.

Providing and laying bituminous concrete using crushed aggregates of Grading-1, premixed with bituminous binder at 5.20 percent by weight of total mix and filler, transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction for 50 milimetre compacted thickness with VG-30 Bitumen, excluding prime/tack coat. Using Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory Roller with Stone Dust filler.

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing hard murum side shoulder including supplying hard murum at the road site, including spreading and compacting for sidewidth layers on each side with vibratory roller including artificial watering etc complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete.

Providing and laying a woven Polypropylene Geotextile of Type-III manufactured from black Ultra Violet stabilised Polypropylene Tape yarn on the prepared subgrade as the separator cum reinforcement with necessary overlap as per drawing.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre to 3.0 metre) by Mechanical Means..

Providing and laying in situ / ready mix cement concrete of Mix-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural / Vertical Shaft Impact (VSI) standard Artificial Sand.

Providing and laying in situ / ready mix Mix-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cum.).

Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.

Providing and fixing Road Junction/ Information sign boards of size 1.80 x 0.90 metre Prepared on16 guage Mild Steel sheet on frame of Mild Steel angle of size 35 x 35 x 5 milimetre with cross bracing of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border/ letters/ numeral/arrows, coated with non pealable crystal clear protective transperent coat retaining percent reflection including two angle iron post of size 65 x 65 x 6 milimetre of 3.65 metre long inflated at bottom, drilled on top and painted in white and black bands of 30 centimetre with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long. Sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in- charge etc. complete.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 750 mm made out of 4 mm aluminum sheet,composite material with 0.5 mm skin thickness on either side, bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing N.H./ S.H. Route Marker size 60 centimetre x 45 centimetre with one number direction plate of size 30 centimetre x 25 centimetre prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border/ letters/ numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining percent reflection including one number ofMild Steel Angle iron post of size 50 x 50 x 5 milimetre of 3.65 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 4 numbers of high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge etc. complete.

Supplying and installation of Road Delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 centimetre high above ground level, painted black and white in 15 centimetre wide strips, fitted with 80 x100 milimetre rectangular or 75 milimetre diameter circular reflectorised panels at the top, buried or pressed into the ground and conforming to Indian Road Congress 79 and the drawings complete.

Supplying and Fixing of Molded Shank Raised Pavement Markers/ Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to ASTM D 4280 Type H and complying to specifications of Category A of MORTH Circular Number RW/NH/33023/10-97 – DO III Dated 11-06-1997. The height, width and length shall not exceed 50 milimetre, 100 milimetre and 102 +/- 2 milimetre and with minimum reflective area of 13 square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 milimetre and height not less than 30+/- 2 milimetre) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and erecting a Type-A, W "Metal beam crash barrier comprising of 3 milimetre thick corrugated sheet metal beam rail, 70 centimetre above road/ ground level, fixed on Indian Standard Medium Channel series channel vertical post, 150 x 75 x 5 milimetre spaced 2 metre centre to centre, 1.8 metre high, 1.1 metre below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 milimetre, 330 milimetre long complete as per clause 810)".

Providing and fixing reinforced cement concrete 200 metre stone as per Indian Road Congress standard including fixing in block of cement concrete 1:4:8,painting lettering complete.

Providing and fixing reinforced cement concrete 1:2:4 ordinary kilometre stones including painting,numbering as per Indian Road Congress design for major district road kilometre stone and fixing in standard size cement concrete 1:4:8 block complete.

Providing and fixing Mandatory/ Regulatory sign board of c Indian Road Congress ular shape of size 60 centimetre diameter prepared on 16 gauge Mild Steel sheet including painting with zinc chromate stoving primer and two coats each of white back ground,red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol/ letters/ numerals/ border, coated with non pealable crystal clear protective transparent coat retaining percent relection including one number of Mild Steel Angle iron post of size 50 x 50 x 5 milimetre of 3.45 metre long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 2 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size etc. complete.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete by Manual Means.

Providing and filling Sand in Foundation Trenches as per Drawing and Technical Specification

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete.

Providing and laying in situ /ready mix controlled grade of Mix-15 of trap/ granite/ quartzite/ gneiss metal for RCC works in cut off walls/ curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine aggregates of required specifications (V.S.I. Sand finely washed etc.), excluding reinforcement.

Providing and laying in situ / ready mix / ready mix Mix-15 cement concrete of trap metal in foundation including necessary centering, formwork, bailing out water, compacting,curing etc. complete, with ordinary concrete mixer, with V.S.I. Sand.

Providing and laying in situ/ ready mix Mix-30 controlled reinforced cement concrete of trap metal for raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete, reinforced cement concrete Grade with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying in situ/ ready mix Mix-25 plain cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel formwork centering, (excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 etc. complete, as directed by engineer in charge, for height upto 5 metre, with Concrete Mixer, with with fine agreegates of required specifications (VSI sand finely washed etc.) The basic rate shall be increased for height above 5.00 metre in following manners (A) Depth upto 10 metre percent extra for rate, (B) Depth upto 15 metre Add 40 percent extra for rate, C) Depth upto 20 metre Add 60 percent extra for rate, (D) Depth upto 20 metre Add 100 percent extra for rate.

Providing and laying in situ/ ready mix controlled Mix-30 cement concrete of of trap/ granite/ quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in cement mortar 1:3 and curing etc complete (Excluding reinforcement), with reversible drum type mixer/ concrete batch mix plant (pan mixer), with with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying in situ/ ready mix Mix-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.) i) Height up to 5 m, normal rate.ii) Depth 5 to 10 m, add 30 percent extra iii) Depth 10 to 15 m, add 40 percent extra iv) Depth 15 to 20 m, add 60 percent extra v) Depth 20 m and above, add 100 percent extra.

Providing and laying in situ/ ready mix, Mix-20 Reinforced Cement Concrete of trap metal for Reinforced Cement Concrete work of ballast walls and kerbs including scaffolding, compaction, formwork finishing and curing etc. complete, excluding reinforcement, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.)

Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.

Back filling behind abutment, wing wall and return wall by Granular Material as per drawings and technical specifications etc. complete.

Prividing and fixing pressure relief pipes of 100 milimetre diametre of Asbestos Cement / PolyVenylChloride as per drawing for reinforced cement concrete Raft, Galaries, Returns, Abutments, Wing walls etc. complete.

Providing tar paper bearing including laying in proper position etc. complete.

Providing expansion joints with 25 milimetre thick bituminous pad as per detailed drawings etc. complete.

Providing and laying in situ/ ready mix Mix-20 cement concrete of trap metal for wearing course 8 centimetre thick including compacting, finishing, curing and filling in joints with bitumen etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.)

Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.

Providing Reinforced Cement Concrete railing of cast in situ/ ready mix Reinforced Cement Concrete posts with Mix-20 cement concrete of trap metal for horizontal and vertical members as per detailed drawings including reinforcement, scaffolding, centering, formwork, compaction, finishing and curing with watering chemical compound etc. complete with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) (VSI sand finely washed etc.)

Providing vent holes 100 milimetre diameter Galvanised Iron pipe in the slab and wearing course with iron grill at the top and Galvanised Iron pipe at bottom as per drawing etc. complete.

Providing and laying Weep Holes of 100 milimetre diameter Asbestos Cement / PolyVenylChloride pipes as per drawing for abutment returns, return walls etc. complete.

Dewatering on Brake Horse Power basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 Brake Horse Power pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre to 3.0 metre) by Mechanical Means..

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre) by Mechanical Means..

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.

Providing and laying in situ / ready mix cement concrete of Mix-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc.)

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete, with Ordinary Concrete Mixer, with Natural / VSI standard Artificial Sand.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 1200 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing and curing including preparation of sub-grade surface if required etc. complete.

Providing and laying in situ cement concrete M-30 with tremix treatment for 200 milimetre thickness for Concrete Road including laying plastic sheet of 125 micron with groove cutting of 4 milimetre wide and 20 milimetre deep, with necessary refilling with Refilling with Polysulfide Sealent (pouring Grade) conforming to BS:5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing polyethylene foam backer road of required diameter (excluding reinforcement) with course and fine agreegates using VSI quality artificial sand etc. complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 1800 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

RAJ PATH INFRACON PVT LTD