REPAIR MAINT OF UNSV SECURITY LIGHT FITTINGS FLOOD LIGHTS HIGH MAST LIGHT AND ALLIED WORKS AT RMS

Amount

Excavation in trenches, not exceeding 1.5 m wide and n. exc 1.5 m in depth for laying of cable and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation complete all as specified and as directed. Note: Punned thickness shall be measured and paid

Supply and laying of un-reinforced precast concrete cable cover of class LV type-I, flat 250mmx150mmx40mm size in trenches perpendicular to axis of the cable complete all as specified and as directed.

Supply & laying GI tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 32 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.

S&F in repairs street light bracket duly bended, made up of 32 mm dia light grade GI tubing not less than 1.5 m complete with and including MS flat 40x5mm with nut , bolts and washer duly painted with two coats of aluminium paint over and including a coat of red oxide primer complete all as specified and as directed.

Supply and laying or fixing or passing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 4 core including taking up/down old unsv one complete all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with nominal cross sectional area 6 sq. mm 2 core including taking up/down old unsv one complete all as specified and as directed. Note:- (i) all connections are uniformally dressed and connected/ jointing of cable with suitable size of lugs.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with nominal cross sectional area 4 sq. mm 2 core including taking up/down old unsv one complete all as specified and as directed.

S&F in replacement LED aviation light luminaries comprising of alluminium housing with polycarbonate enclosure with 302 nos LED ,including cable of required size for connection after taking down old unserviceable light fittings, complete all as specified and as directed. Make : Philips/CG/Bajaj

Taking down luminaries of High Mast and servicing/greasing the motor, gear, Chain,all moving part etc and restoring the luminaries to top of the mast of pole,canopy fixing bracket including charges for machinery required for fixing at top position as directed complete all as specified and as directed. Note:Spare parts shall be measured and paid separately

Repair/rewinding of three phase motor of capacity 1HP/1.5HP after taking down from existing location ,refixing the same after repair complete all as specified and as directed.

Replacement of chain with existing size after taking down from existing location complete all as specified and directed.

Supply and fixing in repairs LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant, corrosion resistant driver with 32mm bore light grade GI pipe for length not less than 1.5 metre of 45 degree bend shape bracket , lamp,bracket of suitable size including nuts, bolts, washers etc including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed.

Supply and fixing in repairs LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant, corrosion resistant driver with 32mm bore light grade GI pipe for length not less than 1.5 metre of 45 degree bend shape bracket, lamp, bracket of suitable size including nuts, bolts, washers etc including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed.

Supply and fixing in repairs LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, corrosion resistant driver with 32mm bore light grade GI pipe for length not less than 1.5 metre of 45 degree bend shape bracket, lamp bracket of suitable size including nuts, bolts, washers etc including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed.

Supply and fixing in repairs two core FRLSH PVC insulated stranded aluminium conductor cable of size 2.5 sq mm, 1100 volts grade ISI marked complete all as specified and as directed.

Repair/maint of winch and electric box of high mast all as per specified and directed by Engr-in-Charge.

S & F in replacement of lifting wire rope, stainless steel of existing gauge up to 10 mm for high mast complete all as specified and as directed.

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/welding or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earthing test point all as specified complete with excavation & earth work, PCC pit with 6mm thick CI /MS cover having suitable handle (10mm MS Rod) with frame & locking arrangement, 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed. Note- (i) Earthing test report to submitted by contractor to this office (ii) Earthing test result should be not more than 2.0 ohm value. (iii) If desired result not achieved, contractor quoted rate is deement to be included for again providing the same till the desired result achieved 2.0 ohm value.

S&F in repair 4 pole power contactor 40 Amps 415 volts, 3 phase AC-3 rating, ML2 type complete with 220-240 volts AC coil complete all as specified and as directed.

S&F in repair analog timer switch suitable for 40 Amps capacity at 415 volts AC 50 Hz supply including all necessary connections complete all as specified and as directed.

Disconnecting/Taking down UNSV Street / Perimeter / Security Roadway / fittings from pole/Structure and repair / checking and identifying of faulty spares wirings, cleaning of fittings, cover, etc. and re-assembling the same after repair, testing and refixing in original position and reconnecting with the electrical line complete all as directed by Engr-in-Charge. (Spare parts shall be measured and paid separately under relevent items here in after.)

S&F in replacement of LED street light fitting driver ISI marked of capacity 60 Watt complete all as specified and as directed. Make : Havells/Crompton/Surya/Bajaj

S&F in replacement of LED street light fitting driver ISI marked of capacity 70 Watt complete all as specified and as directed. Make : Havells/Crompton/Surya/Bajaj

S&F in replacement of LED street light fitting driver ISI marked of capacity 90 Watt complete all as specified and as directed. Make : Havells/Crompton/Surya/Bajaj

Material and labour in replacement of high mast with LED energy saving, environmental friendly, LED flood light 200 watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp suitable for high mast/tower lights as application including opening and fixing of nuts, bolts and washers on existing high mast/tower/wksp structure properly complete all as specified and as directed.

S&F in replacement of LED street light fitting driver ISI marked of capacity 120 Watt omplete all as specified and as directed. Make : Havells/Crompton/Surya/Bajaj

S&F in replacement of LED street light fitting driver ISI marked of capacity 200 Watt omplete all as specified and as directed. Make : Havells/Crompton/Surya/Bajaj

Material and labour in repair/replacement of unsv Flood Light with LED energy saving technology, environmental friendly,corrosion resistant, LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection complete with driver and lamp suitable for high mast/tower lights as application including opening and fixing of nuts, bolts and washers on existing high mast/tower/wksp structure properly complete all as specified and as directed.

Supply, installation, testing and commissoning LT panel made out of 3mm thick CRCA sheet, double door type with sloping canopy suitable for outdoor installation with degree of protection IP 54, with angle iron frame made of 40 x 40 x 6mm at vertical corners & Medium Channel at base of Panel board floor mounted, dust and vermine proof, suitable for voltage 415 V 3 Phase 4 wire weather proof, with separate hinge door for each compartment with locking arrangement, with back door common openable (Screwed), grouted in PCC 1:2:4 complete including painting the steel surfaces with two coats of zinc chromate primer & two coats of epxoy paint , type tested, with TPN copper bus bar chamber 250 Amp capacity and connections with spring loaded fix connect terminals with temperature resistance of 40 degree celcius to 120 degree celcius with cable entry suitable size of glands terminals & thimbles all as specified and prewired with suitable size of pvc insulated copper conductor cable duly mounted on angle iron frame fixed on PCC blocks fixed with grouted bolts nuts and washers complete including supply fixing and making provisions of the following incoming and outgoing accessories complete all as specified and as directed:-

SHRIi Bachulal shah (BID ID -3315582)