REAPIR TO LEAKAGE SEEPAGE OF ROOF AT KPR OF SQAE(A) KANPUR UNDER GE (I) (P) (FY) KANPUR.

Amount

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles completed all as specified and directed by EIC

M&L for Brick work with sub-class “B” bricks straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 all as specified.

All as per Item No -05 above but without bricks.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 as on brick or concrete walls surfaces. finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 as on brick walls finished the surface even and smooth w/o using any extra cement all as specified.

M&L for 10mm thick rendering in cement mortar 1:3 as on ceiling and finished even and fair without using extra cement complete all as specified and directed..

M&L for vitrified joint free light shade ceramic coloured tiles 10 mm thick (square/ rectangular) double charge area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L for vitrified joint free light shade ceramic coloured tiles 10 mm thick (square/ rectangular) double charge area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in skirting and vertical surfaces etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L Non - skid Ceramiccloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed..

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade complete all as specified and directed.

M&L for 16 to 20mm thick Granite slab machine cut for self flooring over cement screed base laid and jointed with grey cement slurrry mixed wit pigments to match the shade of the slab including cutting rubbing and polishing complete all as specified.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer of cement mortar 1:4 for vertical suefaces of wall tiles complete all as specified and directed.

Dismantling textile covering in wall/ceiling including frame (if any) and cover fillets complete all as specified.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with pigment in floor set and jointed in neat cement surrey and point in white cement to match colored tile over40mm thick sand filling complete all as specified and directed.

M&L for 75mm thick in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protections/ path including necessary form work complete all as specified.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous ) to flat surface over 2nd class soft wood or metal frame work and reinforced with G.I wire mesh complete all as specified and directed.(Fillet s, metal frame work and G.I wire mesh paid separately)

S & F Anodised aluminium snap grid of size (65x605)mm frame work for false ceining all as specified and directed.

M&L for hangers 6mm dia . G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40X3mm size 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not 1.5 Sqm each (any type of door,s/window's) complete all as specified and directed.

All as per item No. 25 here in before but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutters only area exc,1 Sqm but not exc, 2 Sqm each (any type of shutters ) complete all as specified and directed.

S&F solid U pvc frame (single rebated of size 60x30mm made out of solid u pvc foam witj homogenous fine cellular structure having smooth outer integral skin with suitable skin with suitable metal stiffner and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing as per specification & drawing complete all as specified and directed.

M&L for factory made solid U pvc profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminated on bothsides of approved colour as in fill with C type GI or 40x20x19 of ms pipe as in stiffner & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F of 100 mm size PVC butt hinges of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC handle of Make: Prayag or equivalent complete all as specified and directed.

S&F of 150 mm size PVC tower bolt of Make: Prayag or equivalent complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or PVC pipes & removing debris off the site.

S&F in of PVC (SWR) pipes ,single socketd, in any length with rubber rings 75mm dia.

S&F in of PVC (SWR) pipes ,single socketd, in any length with rubber rings 110mm dia.

S& F pressed seel frames size125x60mm for doors with one or more rebates including necessaey fixing lugs, hinges, lock strike plate, etc., incl pcc 1;2:4 filled in hallow portion complete, as specified, supplied and fixed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type , both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F for 35 mm thick second class hardwood, glazed and skeleton shutter, open rebated and prepare to received glass, gauge etc (with sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc; size of member of shutter as specified in SSR Part-I Section 8 clause 8.24 (b) and fixed to chowkhats complete all as specified and directed.

S & F in repairs 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. complete all as specified and directed.

S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed.

S&F for stainless steel wire cloth of 0.36 mm dia of wireand average width of aperture 1.40mmfixed with stainless wire staple complete all as specified and directed.

S&F in repairs stainless steel wire cloth of 0.36 mm dia of wireand average width of aperture 1.40mmfixed with stainless wire staple complete all as specified and directed.

S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed.

S&F of steel windows with side hung shutter including box type hinges with steel handle and steel peg stay with glazing bars, dovetailed or welded complete all as specified and directed.

All as per above item no 48 here in before but without glazing bars.

S&F of steel ventilators with partly glazed and partly gauged complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with putty or fixed with beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F of mild steel work as in holdfasts, clamps, stays and similar small articles including nuts and bolts complete all as specified and directed.

Dismantling of PVC water storage tank and removing to store of capacity exc. 250 ltrs but n. exc. 500 ltrs complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed.

All as per item no-55 here in before but of 20 mm bore.

S&F of 15 mm bore steel tubing, medium grade, galvanised with all fitting, fixed to walls and ceiling or laid in floor complete all as specified and directed.

All as per item no-57 here in before but of 20 mm bore.

S&F of 20 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (min wt-210 gram) complete all as specified and directed.

S&F of 500 ltrs capacity triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Pt –I complete all as specified and directed.

Supply and fixed in repairs vitreous china squatting pan Orissa pattern of size 550x400mm including integral foot rest fixed in position and removing debris off site complete all as specified.

Supply and fixed in repairs vitreous china EWC padestal pattern closet with White seat & cover with flat bottom with hanging device and removing debris off site complete all as specified and directed.

Supply and fixed in repairs wash basin (550X400mm) vitreous china including cutting for holes pinking in ends of brackets for erecting stand incl waste pipe and waste coupling and removing debris off site complete all as specified.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) and removing debris off site complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F of PVC connection 600 mm long with brass coupling suitable for 15 mm dia pipe complete all as specified and directed.

S&F in repairs syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified.

Supply & fixed in repairs fancy type chromium plated 15mm dia Pillar taps with capstan head screwed down high pressure with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.all as specified.

S&F in repairs grating around 140mm size of PTMT (minimum wt 50 gms)

Dismantling of 75 to 100 mm dia cast iron pipes, jointed in cement mortar and fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

S&F for 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on walls/trenches etc with clamps complete all as specified and directed.

S&F for 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on wall/trenches with clamps complete all as specified and directed.

S&F in repairs cast iron bends (any radius) diminishing pieces or tappers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

All as per item No. 76 here in before but of 75 mm bore.

S&F in repairs chromium plated shower rose& arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed.

S&F in repairs bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed

S&F in repairs stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe (concealed type) of 15 mm bore complete all as specified and directed..Hindware Cat no F-100011 or equivalent in L&K ,

Demolition of reinforced cement concrete of any description and in any position all as specified.

M&L for precast cement concrete type B1:2:4 reinforced type B1 using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sunshade etc..

M&L for Reinforced cement concrete type B1:2:4 reinforced type B-1 using 20mm graded stone aggregate as in stair cases lintels RCC chajjas, and sunshade etc..

M & L for 10mm dia TMT bars cut to length bent to shape as required including binding with mild steel annelid wire not less than 0.90mm dia all as specified.

M & L for 8mm dia TMT bars cut to length bent to shape as required including binding with mild steel annelid wire not less than 0.90mm dia all as specified.

Use & waste for formwork to sides and soffits of shelves, shelves, suspended slab, chajjas including support, overhanging etc. for rough finished surfaces of concrete flat complete all as specified and directed.

S&F of mild steel work as in grills, gratings etc. such as window guard bar, angle iron in door frames, barred iron door and similar work etc; confirming to Fe-290 Gde E-165 including cutting and welding as required complete all as specified and directed.

S&F floor door stopper of aluminium alloy long anodized with hard drawn steel spring fixed length of cover plate 15 cm long all as spd

S&F in repairs 25 mm dia cp steel conduit as in curtain rod and fixed to brackets complete all as specified and directed.

S&F in repairs fancy type brass cp bracket & side knobs suitable for 25mm dia curtain rod and fixed to walls with screws complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

M & L PCC 1 : 2 :4 Type B1 ( 20 mm graded aggregate) as in coping.

M & L two coat of oil bound distemper on newly plastered surfaces of walls and chalk whiting on plaster surfaces preparator to distempering including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M&L preparation of old painted surfaces and applying a coats of oil bound distemper complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of new plastered surfaces applying two coats of cement base paint over one coat of white wash on walls complete all as specified.

M&L for Preparation of new plastered surfaces applying three coats white wash on ceiling surfaces complete all as specified and directed.

same as per item No-102 above but one coat of white wash on old ceiling surfaces complete all as specified and directed

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer.

M & L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for prepration of surfaces by applying jk/birla wall care putty and rubbing &making the surface smooth by using embbray paper complete all as specifird and directed

M&L for preparation of new surfaces and finishing walls with prmium acrylic smooth exterior paint with silicone additives of required shade : new work (Two or more coats applied at 1.43Ltr/10Sqm over including priming coat of exterior primer applied at 2.20Kg/10Sqm complete all as specified and directed.

Demolition of existing water proofing treatment all as directed & specified and removing rubbish exc 250m and cleaned the roof surface completed all as specified and directed by EIC

M&L for plain cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in roof, kerbs or mud stops, benching etc; rounded or chamfered angle complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on roof slab finished top surface even and smooth with using extra cement and using 3% W.P compound by weight of cement completed all as specified and directed by EIC (W.P compound measured and paid seperately.

Supply only integral water proofing compound completed all as specified and directed by EIC

Cutting grooves in V-section in existing roof or terracing, cleaning out and grouting with cement & sand mortar 1:3, cutting depth not exc 10cm girth complete all as specified and directed.

M&L for APP modified membrane water proofing treatment on roof slab as specified. (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface apply a uniform coat of bituminous primer T-10/ Polymerised primer oil based coat @ 0.30 litre per Sqm.as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane pre fabricated with non woven polyester mat as reinforcement stabilised with fibre glass strands & top with Grey mineral slates 3mm thick weighing not less than 3.5 Kg/ Sqm shall be laid by torch application method. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. (e) The above treatment shall be carried out as approved & specified from one of manufacturers. (f) The membrane top to be treated with one coat of aluminium paint

Dismantling of structrual steel work of any description including doors, gates but excluding framed truss . complete all as specified and directed.

Dismantling corrugated or semi corrugated steel sheeting any thickness any gauge any pattern as in roof covering in roof all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding dorrs; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F pre-painted galvalum aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalum aluminium zinc coating gi based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding/ridge/valley gutters , fixed with self tapping screws as specified.

M/s raj constructions

J.B.ENTERPRISES

Allied Builders And Engineers

S.D.TRADERS