Renovation/Repair of Control Room Building Complex along with sub-division office building at 150 MVA 132/66 KV Grid Station Kathua

Amount

Repair Of Roof Of Control Room And Sub Division Building including all Supply & Carriages ( Mechanical & Manual)

Demolishing mud phaska in terracing and disposal of material within 50 meters lead

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. 12.15.1 with residual type petroleum bitumen of grade VG-10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. 12.25.1 With common burnt clay (non modular) brick tiles of class designation 10.0 ( Qty vide item no. 1)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase 2x(39 + 11.50) = 101 rmt

Repair Of Bathrooms Of Control Room And Sub Division Building including all Supply & Carriages ( Mechanical & Manual)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Repair Of Front Elevation And Pantry Of Control Room And Sub Division Building including all Supply & Carriages ( Mechanical & Manual)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Centering and shuttering including strutting, propping etc. and removal of form for: Weather shades, chajjas, corbels etc. including edges

Centering and shuttering including strutting, propping etc. and removal of form for Shelves , Suspended floors

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 2 (Area of slab over 0.5 sqm)

Stainless steel kitchen sink - with drain board 510 x 1040 mm

Repair of Doors and Windows Control room and Sub Division building including all Supply & Carriages ( Mechanical & Manual)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead

Renewing glass panes, with putty and nails wherever necessary including raking out old putty :Float glass panes of thickness 5.0 mm(weight not less than 12.5kg/sqm)

Providing and fixing aluminum work for doors, windows, ventilators with size aluminium section 101.45 x 44.45 x 2.25 mm for frames and for door shutters with aluminium of section 110 mm x 25.44 x 2.25 mm and 150 x 25.44 x 2.25 mm resp. and for windows shutters with aluminium section of 110 x 25.44 x 2.25 mm and 83.33 mm x 25.44 x 2.25 mm resp. including glazing for windows with float glass panes 4mm thick and for doors with float glass panes 5.5 mm thick and 12mm thick prelaminated board ( decorative both sides ) for doors and partitions incl. hydraulic door closers of ISI brand for doors with complete fittings and fixtures of aluminium such as Tower bolt 150 x 10 mm, for windows 300 x 10 mm for door handles of size125 mm for door and windows and sliding bolts of aluminium of size 300 x 16 mm for doors , Complete job (Powder coated Alluminum )

Wall Painting For The Interior And Exterior Of Control Room And Sub Division Building including all Supply & Carriages ( Mechanical & Manual)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick Qty vide item 12 ( a - g ) @ 95%

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade: 13.117.1 Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Provision For 02 No's Steel Stair including all Supply & Carriages.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete etc. Fixed to steel windows by welding

Repair Of Plaster Of Control Room And Sub Division Building including all Supply & Carriages ( Mechanical & Manual)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge

Providing & Fixing of Sanitary and hardware fixtures such as Washbasin , urinals ,towel rod , soap dish , lookin mirror , White vitreous China pedestral type water closet (European type ) , underground water tank repair including all Supply & Carriages.

Providing and Fixing of LED lights and Curtains in Control room and Sub Division office along with J.E Room

SUNIL KUMAR SURI CONTRACTOR