Development of Park at Kh. No. 22/2 in village Daryapur Khurd in Matiala Assembly Constituency-34.

Supply of earth including royalty excavation, loading, unloading and carriage by mechanical transport lead upto 5.00 KM and banking the same in layer not exceeding 20cm in depth breaking clods watering rolling each layer with ½ tone roller or wooden or steel rammer sand dressing up in embankment for roads, flood banks, marginal banks and guide banks or filling up ground depressions with all lifts in all kind of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with C&D bricks in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse san manufactured by using recycled C&D waste from authorized C&D waste recycling plant all complete as per t direction of Engineer-in-charge.

Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing 36mm thick EPDM (Ethylene Propylene Deine Monomer) Rubber flooring on existing surface in required color and shape. The EPDM Rubber flooring should be laid at site in dual color and pattern as per the direction of the Engineer-in-charge. All complete as per manufacturer specification.

Supplying of fixing of garden bench (Victorian) both sides of garden bench are made of flora cast iron having back height of minimum 700mm and minimum seating height of 375mm and both sides of garden bench is connected with MS tube of 65mm x 25mm sheet angular tube having width of 15-20mm in 10 nos. for seating purpose with extra support 25mmx5mm M.S. flat for extra stability all sharp and rough edges of bench are to be grinded with grinder and all fill up with M seal where it is required necessary. This bench is having the provision of hold fast system of for growing bench is complete with a cutting of Ist class Red oxide and with two coat of synthetic enamel of Ist class quality paint. Finally bench is assembled with nuts and bolts including all tax. The length of bench be 1500 mm and minimum overall weight not less than 90kgs. The name of Hon'ble MLA & Constituency name is to be written on each bench with synthetic enamel paint of suitable size.

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. Red sand stone

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: All kinds of soil