CERTAIN REPAIR TO OTM ACCN OF ENGR REGT, POI, POSTAL UNIT, PANTHER STADIUM, 15 IDSR, PROVOST UNIT, AUDITORIUM AND FULKARI GUEST ROOM UNDER GE AMRITSAR

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

Dismantaling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for Brick work with sub class "B: bricks straight or curved on plan exc 6 m mean radius in CM 1:4.

All as per Srl item No 3 above but except bricks (old serviceable bricks obtained from Srl item No 2 shall be reused after necessary cleaning of mortar)

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement complete all as specified and directed.

All as per Srl item No 5 above but in CM 1:6.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed

M&L for Flush pointing to brick walls in cement mortar 1:3, including racking out of joints, scrubbing down with water etc complete all as specified

M&L PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc using chicken wiremes upto 4 m height including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 complete all as specified and directed.

All as per item here-in-before but height exc 4 m but n.exc 9m.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on walls complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying two coats of white wash complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per item above here-in-before but exc 1.5 sqm and n. exc. 4 sqm each complete all as specified & directed

Taking down shutter of any description exc 1 sqm and n. exc. 2 sqm each and removal from site complete all as specified & directed

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm single rebated outer frame, comprises gauged skelton shutter frame of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of wire gauge including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below and all as shown on drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf. Note :- Guard bars, wire mesh and painting shall be measured and paid sperately.

All as per item above here-in-before but for glazed skeleton shutter

S&F Box type ventilator fixed type with glazing bar as per drawinhg No CE JZ-70/06-07 dated 07.06.07 with guard bars including priming coat complete all as specified and all as directed

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

All as per Srl item No 21 above but figured glass pin head type & glazing with oil putty

Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item above here-in-before but size 125x60mm with double rebate.

M&L Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.

S&F factory made 30-40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specfied and directed.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F 300 mm mild steel ordinary rat tail door spring including roller and roller plate complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 300mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F Aluminium, anodised, barrel tower bolts 200mm of extruded section and fixed

S&F 150mm size, Aluminium handles and fixed with steel screws, complete all as specified.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified.

S&F Framed work confirming to FE- 290 (Gde-E- 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site . Make: Rajshri or equivalent as approved.

S&F medium weight, stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed

S&F 150mm long Aluminium handles, cast type anodised

S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long complete all as specified. Note :- Floor spring shall be measured and paid separately.

S&F aluminium poweder coated shutter (for windows and ventilator) with style, top and bottom rail of section 44x44mm of 2mm thick side hung type, without sash bars including 5mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized fittings such as peg stay 150mm long, handles 125mm, tower bolts 150 mm long, complete all as specified.

S&F 10mm thick PVC insulation panels with EPS stuck to mm printed PVC sheet suitably placed in aluminium door as per specification.

S&F in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Mild steel , Two lever, Mortice lock, verticle type of size 100mm complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads. S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm complete all as specified.

Dismantling of boarding any description. Fixed in any position with screws complete all as specified.

S& F 18 mm thick PVC board as in shelves for kitchen cabinets etc all as specified.. Make Rajshri/ Sintex

S& F 18 mm thick PVC shutters one side prelaminated of any shade for kitchen cabinets etc all as specified. Make Rajshri/Sintexx

S& F 40mm long self closing type hydraulic steel hinges complete all as specified

S&F 75 to 80 mm long stainless steel handle complete all specified.

M&L in repair for Block Boards, 19/20mm thick, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work.Make:-Green ply,Anchor or equivalent

M&L for external teak wood lipping, 6mm thick to 18/19mm thick block board or prelaminated particle board, fixed with nails including french polish etc complete all as specified.

S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

M&L for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling as specified and directed by Engr-in-charge

S&F GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixe to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on and incl PVC frame as per specifications, drawings and manufacturers instructions. Make: Rajshri

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per manufacturer instruction. Make: Rajshri

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Vitrified tiles,light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6.

All as per item here-in-before but on vertical surfaces but on rendering 10mm thick in CM 1:4.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

All as per item here-in-before but on vertical surfaces but on rendering 10mm thick in CM 1:4.

S&F glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

M&L for Cement concrete tiles 20cmx20cmx20mm thick,machine pressed ; set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment, and cut and polished over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed

Supply & Fixing vitreous china urinal half stall type with CP spreader white with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed

Supply & fixing in repairs vitreous china wash down water closet pan (padestal pattern) with flush pipe 32mm dia for low level flushing cistern including plastic water closet seat cover white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device ,complete as directed. (excluding flushing cistern).

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed

S&F in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut complete all as specifed and directed.

S&F in Repair vitreous China wash basin with pedastal white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore complete.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Dismantling water tanks Exc 500 Ltr & not exceeding 1000Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

PTMT shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of PTMT as in repair complete all as specified.

S&F in Repair Bib tap of PTMT, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in Repair 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed .( Make : Prayag/Polytuf)

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe complete all as specified.

S&F 125mm dia PTMT grating fixed over trap with cement complete all as specified.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S&F in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repairs CP wall mixer with telephonic shower arrangement and telephonic shower suitable for 15mm dia bore pipe Complete all as specified and as directed.

S&F in repairs centre hole mixer cast coppre alloy chromium plated with capston head (Pillar Mounted) srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia complete all as specified.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

S&F in repair Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges

S&F in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail.

S&F in repairs PVC Mirror cabinet with shelves of best quality including fixing arrangements size 350x450mm .Make : Prayag

S&F in repair PVC waste pipe32mm dia fixed to WHB/Sink

Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar.

M&L Granite work (of any type) (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors including rubbing and pollishing complete including 15 mm thick screed bed in CM 1:6 all as specified and directed.

All as per Item here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor.

M&L Chequered cement concrete coloured tiles 20cmx20cmx25mm thick set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified. equivalent as approved by Garrison Engineer.

M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and directed.

S&F in repair 100mm bore Cast iron floor trap, with grating including jointing to waste pipe in run lead.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal from site ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supreme,Finolex,Jyoti.

S&F 110mm bore PVC (SWR) bends any radius With access door

Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof padding ,roof kerbs or mud stops,and like including weathering slight rounded and throating complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All a per Srl item here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)

Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified.

Flush pointing to brick tiles / tarracing tiles on roofs in cement mortar 1:3, including racking out of joints etc. complete all as specified

M&L 50 mm thick pre-cast louvres and jallies (measured solid) in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including all moulding but excluding frame and sey in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

M&L precast cement concrete blocks type B-1 (1:2:4) using 20mm graded aggregate set in mortar 1:4 for posts, pillars etc for holding louvres & jallis all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc) ) sheets in on roof coverings complete all as specified.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified.

All as per item above hereinbefore but using old AC sheets retrieved from dismantling complete all as specified.

M&L Asbestos cement two pieces adjustable serrated ridge, 6 mm thick for corrugated or semi-corrugated sheets complete all as specified.

S&F stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 950 x 550mm with bowlsize 550x440x160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete.

Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, at any position complete all as specified.

S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, fixed with self tapping screws all as specified

m/s. gopal krishan

M/s. M Company

Saini Constructions