DAY TO DAY MAINTENANCE OF OTM AND MD ACCN AT WEST SIDE OF AGE B/R 1 UNDER GE GOLCONDA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n exc. 15cm thick.(Below or above ground level) all as specified and directed.

M&L for 75mm thick Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base, rough finished surface all as specified and directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B1 (20mm graded stone aggregate) finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., laid over and including cement screed bed or bedding layer in CM (1:6), 15mm thick and tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over and incudling screed bed or bedding layer in CM (1:6), 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and directed.

M & L for glazed ceramic tiles in vetical surfaces of size 300mmx200mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

Taking down cement plaster any description on brick or stone walls, roof plaster etc including raking out joints,hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specifeid and directed.

M&L for Preparation of wall surfaces and apply three coats of white wash, complete all as specified and directed.

M&L Preparing newly plastered wall surfaces and apply two coats of oil boud distemper emulsion over a coat of primer, complete and all as specified and directed.

M&L for preparation of walls and apply two coats of colour wash over a coat of white wash, complete all as specified and directed.

M&L for Rendering 5mm thick in CM (1:3) as in ceilings concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of ceiling surfaces and apply three coat of white wash, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6), complete all as specified and directed.

M & L Brick work, half brik thick with sub-class 'B' bricks old size straight or curved on plan to any radius built in cement mortar (1:4), complete all as specified and directed.

S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc., complete all as specified and directed.

S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete, all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern), with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern excluding flushing cistren but including `P' or `S trap, complete all as specified and directed.

S & F in repairs, plastic water closet seat & cover for pedestal pan , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete.

S & F in repair stainless steel plate rack 31" X 36" X 10" made up of 1mm thick sheet (Non magnetic) complete all as specified and directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia stop valves/ angle cock chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed;

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) all as specified and directed.

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type) all as specified and directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) all as specified and directed.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repair bib cock/tap 15 mm chromium plated long body complete (but fancy type) or as specified and directed.'

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.

S & F in repair waste coupling bore dia 32mm of PTMT (half or full threaded) for WHB (Minimum weight 32mm-45gms)

S & F in repair Waste coupling bore dia 32mm of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms).

S&F Steel water tubing, 15mm bore, medium grade, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F Steel water tubing 20mm bore, medium grade, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm , 01 No. chramium plated pillar tap, 01 Nos 32mm waste coupling and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete, all as specified and directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

S&F urnial spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) as fixed in repairs.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair Flush pipe of polyethylene of low or high density or PVC 32 mm dia, 900mm long for low level cistern complete all as specified and directed.

S&F in repair PVC waste pipe of size 32mm, 900mm long as for urinal pot / WHB / sink including all fitting of approved make complete all as specified and directed.

S & F in repairs health faucet with spray jet (hand shower) chromium plated incl all fitting & fixtures complete all as specified and directed.

S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete.

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded complete all as specified and directed.

S&F in repairs of MS curtain rod 25mm decorated type powder coated fixed complete all as specified and directed.

S&F in repairs 25 mm dia mild steel brackets for curtain pipe, decorative type powder coated complete all as specified.

S&F in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

S&F double wall 500 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling & removing to store complete all as specified and directed by Engr-in-charge.

S&F double wall 1000 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling & removing to store complete all as specified and directed by Engr-in-charge.

S&F double wall 2000 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling & removing to store complete all as specified and directed by Engr-in-charge.

S&F in repair Cover/ lid for PVC water tank of any capacity complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 250 & n exc 500 ltrs

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 500 & n exc 1000 ltrs

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 1000 & n exc 2000 ltrs

Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20 -25mm thick over cement screed base laid and cement screed in CM 1:6, 15mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20 -25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S and F in repairs wash hand basin Oval type Vitreous china white size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs 15mm dia Swan neck long body CP pillar tap cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts screwed for iron pipe complete.

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) in repairs

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 110mm

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 75mm

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm

S&F PVC (SWR) bends any radius 110mm bore in repairs

S&F PVC (SWR) bends any radius 75mm bore in repairs

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spd and directed.

M&L 15 - 20 mm thick Polished shahabad stone slab (hand cut) in flooring including screed bed 20 mm thick in CM 1:6 , jointed and pointed in CM 1:3 including Grinding & Polishing the shahabad stone floor with seven cut machine polishing all as specified and all as directed by Engineer-in -Charge

M&L 15 - 20 mm thick Polished shahabad stone slab in skirting including 10mm thick rendering/backing coat in CM 1:4, jointed and pointed in CM 1:3 including Grinding & Polishing the shahabad stone skirting with seven cut machine polishing all as specified and all as directed by Engineer-in -Charge

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking down shutters of any discription not exc 1 sq. m each and re-fixing in same opening.

Resecuring or easing and adjusting without taking down.Shutters of any description exc 1 sq. m and n. exc 2 sq. m each.

Taking down shutters of any description n exc 1.00 sqm complete all as specified and directed.

S&F steel ventilators with top side hung shutter, both glazed and gauzed, bottom half fixed type including hinges, steel peg stay complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads oil putty in sq n.exc. 0.32sqm in each pane including hacking out glass complete all as specified and directed

M&L Figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 sq. m in pane.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed.

M&L for Plain cement concrete C-2 type 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection.

NAVANAND ENTERPRISES

Amutha Constructions

Sri Lakshmi Enterprises