RE-ROUTING SHIFTING OF LT/HT EXISTING SERVICES FROM ANUJ VIHAR, VIKRAM VIHAR SUB STATION TO RMU I II OF VIKRAM VIHAR, ANUJ VIHAR, 35 INF BDE, BANA SINGH IN THE AREA OF AGE U ELECT SUPPLY NO III UNDER GE (U) ELECTRIC SUPPLY DELHI CANTT10

Amount

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in Soft soil for laying of cables or GI pipe and getting out and levelling of bottom surface to required level complete all as specified and directed by Engineer- in- Charge.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified.

Supplying laying Class HV tiles, type 1, for 11 KV flat size 300 mm x 180 mm x 40mm complete all as specified and directed by Engineer- in- Charge..

Returning filling in. Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.

Supplying laying Class LV tiles, type 1, for 1.1 KV flat size 250mm x 150 mm x 40mm complete all as specified and directed by Engineer- in- Charge..

Supplying, laying, jointing testing and connecting of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) earthed of size 95 sqmm x 3 core with multistranded aluminum conductors, 11 KV grade, IS 7098 marked, laid in trenches fixed to pole, including jointing & testing complete all as specified. (b) Two run (2x320=640) from Vikram Vihar Power house to near P-290 block. Excavation, earth work, cable protection, sand fillings, cable joint shall be measured and paid separately.

Supplying, laying, jointing testing and connecting of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) of size 300 sqmm x 3.5 core with multistranded aluminum conductors, 1.1 KV grade, IS 7098 marked, laid in trenches fixed to pole, including jointing & testing complete all as specified. Note :- Excavation, earth work, cable protection, sand fillings, cable joint shall be measured and paid separately. Details are as below (a) From LT Panel P-I to LT Panel P-II of Anuj Vihar ( 400.0 RM) (b) From LT Panel P-III to LT Panel P-IV of Anuj Vihar (420.0 RM) (c) From LT Panel P-II to LT Panel P-III of Anuj Vihar (430.0 RM)

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95Sqmm

Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm

Supply and making replacement with new LT 1100 V end termination with suitable size of aluminium lugs duly crimped for LT 3 ½ core armoured aluminium conductor cable after isolating supply to transformer/LT panel and disconnecting brunt/fault cable from the bunch of cables in trenches, galleries, removing cable loop, opening the cable blank and connecting back after end terminals, testing and commissioning for 3 ½ core 120/185/240/300 sq.mm(XLPE)all as specified and directed.

Material and labour for route tracing the 11 KV HT cable by taking proper shutdown & locating from the bunch of cables complete all as specified and directed ..

Taking out LT 1100 V UG cable of size 120/185/240/300 sqmm 3.5 core at site from trench/pole complete all as specified and directed by Enge-in-charge Note: After taking out cable, cable will be either relayed or taken on credit as per the direction of Eng in Charge.

Supply, Laying, connecting, testing and commissioning of LT cable insulated, screened,PVC beded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 V graded with stranded aluminium conductor of size 185 sqmm 3.5 core. (ACB Panel of 35 inf bde to CSD 35 inf Bde Panel) incl taking out old unsv cable-500 RM

All as per Item No15 here in before but of size 120 sqmm 3.5 core. (a) ACB Panel 35 inf bde to 35 bde Workshop Panel -400 RM (b) Anuj Vihar near P-129 Block main LT panel to Near P-131 LT feeder pillar -250 RM (c) Anuj Vihar near P-129 Block main LT panel to Near P-116 LT feeder pillar -200 RM (d) Anuj Vihar near P-129 Block main LT panel to Near P-125 LT feeder pillar -200 RM

Cutting of road /Hard standing to a size of 30 cm in width and not exceeding 90cm in depth for laying of protection pipe /cable including spreading, leveling, watering and well ramming in layers and providing PCC in 1:2:4 type B1 using 20mm graded stone aggregate, for the top 100mm layer, complete all as specified and directed.

Supply, Laying, connecting, testing and commissioning of LT cable insulated, screened,PVC beded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 V graded with stranded aluminium conductor of size 240 sqmm 3.5 core. (a)Bana singh Power house to JCO Qtrs-220 RM (b) Bana singh P-371 to P-430 -310 RM

Supply and fix cable route indicator made of RCC with 8 mm TMT @size 150mm C/C bothways 1.5 M height x 60 cm wide x 10 mm thick tapered on top visible above ground duly painted with synthetic enamel paint of yellow colour base and letters with black paint. The description for writing for HT cable 11kv will be given by Engr-in-charge complete all as specified and directed.

NOTE :-(i)contractor should provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Eng-in-charge.