SPECIAL REPAIR OF E/M INSTALLATIONS AND OTHER SANCTIONED WORKS AT HATTIGOR UNDER GE RANGIA

Amount

Supply, fixing and testing ceiling fans with electronic type regulator and complete accessories (down rod length as per site requirement, nuts, bolts, washers, bush, canopy, etc) having 5 star BEE rating, Copper wound motor high performance in veriable voltage, 1200 mm sweep, three blade, colour (Off white, pearl white) complete all as specified and as directed by Engineer-in-charge.

Dismantling of unserviceable/broken RCC/steel electric poles of any size and type with disconnecting all connections, demolition of concrete foundation including excavation earth work as required and removing the same from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of unserviceable/perished ACSR conductor of any size from LT over head lines and removing the same from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of rusted/corroded earth/guard wire of any size and removing unserviceable GI wire from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of rusted/corroded cross arms fixed on LT poles and removing unserviceable cross arms from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of old unserviceable stay assembly including stay wire complete with necessary demolition of concrete, excavation and earth work as required and removing the same from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of unserviceable insulators of any size and type from LT overhead lines complete all as specified and as directed by Engineer-in-charge.

Supply and errection of steel tubular swaged poles 9.0 metre long, type 410 SP-31 complete with cast iron base plate, final taper plug, bolts, nuts and screws, pole cap etc ISI Marked including painting with two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces and numbering to be done in black synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.

S&F security light bracket made out of GI tubing of size 25 mm, medium grade, 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair of MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 48 Watt LED Street light, energy saving environmental friendly long life LED, Made up of pressure die cast aluminium housing with high power LED, lens embedded PC cover, with IP 66 protection and impact resistance IK07, complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 10 above but depth exceeding 1.5 m but not exceeding 3.00 m in depth.

M&L for PCC (1:4:8) type D-2 ( using 40mm grade crushed stone aggregate) as in foundation of steel tubular poles and stay with necessary form work as required complete all as specified and as directed by Engineer-in-charge.

M&L for PCC (1:2:4) type B-1 ( using 20 mm grade crushed stone aggregate) as in copping of steel tubular poles and stay with necessary form work as required complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft/loose soil, complete all as specified and as directed by Engineer-in-charge.

Removing excavated materials (soils) not exc. 50.00 M and deposited where directed at a level not exc. 1.50 M above the starting point in soil, complete all as specified and as directed by Engineer-in-charge.

S & F aluminum conductor steel reinforced (ACSR) any size as directed on overhead LT electric line with stretching and tensioning with required span sag and binding the conductor with pin/shackle insulator with aluminum binding wire not less than 2mm dia complete all as specified and as directed by Engineer-in-charge.

S & F galvanized wire 3.15/4mm dia as in continuous earth wire/guard or cradle wire made to required shape fixed on poles for LT feeder including binding the same with new GI binding wire not less than 2mm dia complete all as specified and as directed by Engineer-in-charge.

S&F cross arms made out of mild steel channel or angle section of reqd size and shape including clamp back plate with bolts, nuts, washers drilled for insulator bolts, welding, binding cold or hot in any shape or size as directed and painted with two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces complete all as specified and as directed by Engineer-in-charge.

S & F pin type insulator porcelain vitreous, white, brown or green including of size 100 mm height and 65 mm dia for 1100 volt grade one galvanized mild steel spindle two galvanized iron washer and one galvanized iron nut complete all as specified and as directed by Engineer-in-charge.

S&F shackle type porcelain vitreous white, brown or green insulator of size 75mm height, 90mm dia (maximum) including mild steel straps of section 31mmx3mm, washers, 12mm dia insulator bolt and nut suitable for working pressure 1100 volts grade complete all as specified and as directed by Engineer-in-charge.

S&F stay assembly complete with all accessories and stay clamps all as shown in electrical plate No 1 of SSR Part I with using stay rod of 16 mm dia 1.8 m long and stay plate galvanized steel 23cmx23 cmx6mm thick complete all as specified and as directed by Engineer-in-charge. Note - Loop type insulator, excavation and earth work, concrete foundation and stay wire, stay clamps shall be measured and paid separately under relevant items of this Sch ‘A’.

S&F loop type insulator vitreous porcelain white, brown or green large size with overall dimensions 90 x 140mm and clearance of hole 25.5mm complete all as specified and as directed by Engineer-in-charge.

S&F 1100 votls grade heavy duty cable PVC insulated stranded aluminum conductor of size 6 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed for service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia suspension wire one twin core cable flat or circular including taking out unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 23 above but cable of Size 10 Sqmm.

S & F galvanized stay wire (stay strand) of size 7/4 mm with properly tightening the same complete all as specified and as directed by Engineer-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron earth lead wire 4.00mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel, GI earth wire protected by 15mm bore light grade GI pipe and other end connected to earthing test point or main switch board as directed including funnel with watering pipe of 20mm bore light grade GI, wire mesh, charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode PCC (1:3:6) type C-1 earth pit, cast iron cover and frame, including necessary excavation and earth work and necessary testing complete all as specified and directed and shown on electrical plate No 3 of MES Schedule Part I complete all as specified and as directed by Engineer-in-charge.

Supply and install HT 11 KV grade air break switch gang operated triple pole mechanically operated mechanism, switch air break gang operated mounted on 12 Nos insulators on steel frame and drop out fuses on separates MS channel with number of insulators with operating rod of 32 mm bore GI pipe and locking arrangements worked from ground level for current rating 400 amps, including drop out fuses and necessary silver/copper coating jumbers and making all electrical connections complete with locking arrangement complete all as specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLS copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLS copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one light point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.

All as per Serial item No. 28 above but for one exhaust fan point controlled by one way switch.

All as per Serial item No. 28 above but with 4 sqmm (nominal area) cable with 4.0 sqmm size copper earth continuity conductor for 3 pin 15 Amps socket out let on independent board.

Supply and fix switch piano flush type, 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.

Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED light fitting with single LED tube 1 X 18 Watts (4ft.) 240 V surface and wall mounted led batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper contactor cable with 1.5M long suitable size, complete all as specified and as directed by Engineer-in-charge.

S&F lamp holder PVC/Plycarponate type with back plate suitable for LED bulb including 10 watt LED bulb complete all as per specified and as directed by Engineer-in-charge.

S&F PVC rectangular block for mounting, DBs etc. with 3mm thick plastic laminated sheet cover of size 250x200x40 mm deep complete all as per specified and as directed by Engineer-in-charge.

S&F sheet metal enclosures single door for DBs when MCBs to be used single pole & neutral 4 way 240 volt with 100 Amps with rated bus bar complete all as per specified and as directed by Engineer-in-charge.

S&F MCB single pole and neutral of capacity 6 to 32 Amps 10 kA 240 volt complete all as per specified and as directed by Engineer-in-charge.

S&F MCB single pole of capacity 6 to 32 Amps 10kA 240 volt complete all as per specified and as directed by Engineer-in-charge.

S&F 1100 votls grade heavy duty cable PVC insulated stranded aluminum conductor of size 6 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed for service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia suspension wire one twin core cable flat or circular complete all as specified and as directed by Engineer-in-charge.

S&F Security light fittings 1x 15 Watt LED New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP65 protection and impact resistance of IK07 and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size, complete all as specified and as directed by Engineer-in-charge.

Supply and fix exhaust fan AC single phase 230/240V of size 300 mm sweep with louvers, complete all as specified and as directed by Engineer-in-charge.

S&F House service bracket (Hook type) complete with 3.0m long G.I pipe 40mm dia medium grade, two nos.90 degree bends, M.S hook and stay or guy, complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 25 mm bore medium grade including fittings, complete all as specified and as directed by Engineer-in-charge.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as per specified and as directed by Engineer-in-charge.

Cutting into existing steel tubing for alterations or additions of 40mm dia bore of pipes (Each cut measured) complete all as per specified and as directed by Engineer-in-charge.

Supply and fix switch socket combination 05/16 Amp 6 pin flush type, complete all as specified and as directed by Engineer-in-charge.

Supply and draw submain wiring with two single core 6 sqmm FR PVC insulated copper cable 1100 vots grade multistrand, unseathed conductor drawn into PVC casing and caping and all necessary fittings including 6 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface, complete all as specified and as directed by Engineer-in-charge.

Supply, installation, testing and commissioning of air cooled split type Air conditioner of 1.5 TR capacity, wall mounted type, having eco-friendly refrigerant, electric driven, 230 volts AC, single Phase, 50 Hz, five star rated with and including inlet/outlet copper pipe for refrigerant between indoor & outdoor unit and flexible copper wire of suitable size as recommended by manufacturer, complete all as specified and as directed by Engineer-in-charge. Note : 1. The one split type Air conditioner is comprise of one indoor and one outdoor unit only. 2. The cost of making opening for passing through inlet/outlet copper pipes and electrical cord and making good of disturbed surfaces as original by plastering / whitewash / colour / distemper etc. is to be included in quoted rate and no extra payment will be made to contractor on this account.

S&F 4 KVA capacity of volatge stabilizer for automatic operation, single phase, naturally air cooled, designed for input voltage variation between 170V to 250V with output volatge stabilized at 230V with accuracy of +/- 2.5%, complete all as specified and as directed by Engineer-in-charge.

S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular of 10 Sqmm size with multistranded conductor, complete all as specified and as directed by Engineer-in-charge.

M&L for sheet metal enclosures with plug top and single pole MCB of 20 A 'C' curve 10KA capacity, complete all as specified and as directed by Engineer-in-charge. Make - Legrand/Havells/L&T/Indo Asian.

S&F double door sheet metal enclosures for DB's when MCB to be used is triple pole & neutral 4 way 415 volt, complete all as specified and as directed by Engineer-in-charge.

S&F MCB Triple pole and neutral having 63 Amps capacity 10 ka 415 Volts, complete all as specified and as directed by Engineer-in-charge.

M&L for sand cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm spread thick-ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed by Engineer-in-charge. (NOTE : For the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid for).

Taking up XLPE cable, 1100 volts grade of size 3.5 core 180 sqmm cable and bricks shall be kept in for reuse at site, complete all as specified and as directed by Engineer-in-charge.

Relaying of XLPE cable 1100 volts grade of size 3.5 core 180 sqmm cable in trenches, with sand & bricks including connectinon & testing, complete all as specified and as directed by Engineer-in-charge. Note - 1. Sand shall be measured and paid separately. 2. Bricks obtained from Sch 'A' item No. 55 shall be used under this item.

M& L for desconnecting & removing of LT panel of any size from existing foundation and shifting to a new location including installation, testing & reconnection of LT panel at new location, complete all as specified and as directed by Engineer-in-charge.

M&L for construction of PCC platform having length 1.5 m, width 1.1 m and 600 mm overall height out of which 300mm is above natural ground level for LT panel, complete all as specified and as directed by Engineer-in-charge.

S&F LED Street light of capacity 30 Watt., energy saving environment frindly, long life LED, made up of pressure die cast aluminium housing with high power LED lens embedded PC cover, with IP 66 protection and impact resistance IK07 including connection wire, complete all as specified and as directed by Engineer-in-charge.

Supply and fix metal body exhaust fan of 450 mm Sweep, Single phase, 230 Volt, 50 Hz, Heavy duty copper wound motar, double ball bearing, 900 RPM, with outside opening louvers made by MS sheet, complete all as specified and as directed by Engineer-in-charge. Note- Quoated rate must include making opening/hole to wall, fixing of fan & making good disturbed surface.

M&L for point wiring with 2.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLS copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends, elbow, crosses, etc. with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 2.5 sqmm size PVC insulated multistranded FRLS copper conductor cable as earth continuity conductor and connected to earth dolly for one exhaust point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.

Surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as per specified and as directed by Engineer-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, in CM 1:6 straight or curved on plan exc. 6m mean radius, complete all as per specified and as directed by Engineer-in-charge.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick in cement mortar (1:4) finished even and smooth without using extra cement on brick surfaces, complete all as per specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick in cement mortar (1:6) finished even and smooth without using extra cement on brick surfaces, complete all as per specified and as directed by Engineer-in-charge.

M & L for 75 mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed by Engineer-in-charge.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6, complete all as per specified and as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting, dado, etc. and jointed in neat cement slurry and pointed in white or Coloured cement to match with the shades of tiles over 10 mm thick screed bedding layer in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste coupling of size 32 mm and waste pipe 32 mm, etc., complete all as per specified and as directed by Engineer-in-charge.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D-Type, 60 cm long between flanges, complete all as per specified and as directed by Engineer-in-charge.

S&F 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.

M&L for 2nd class hard wood in scantling wrought timber framed and fixed complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as per specified and as directed by Engineer-in-charge.

M&L for precast cement concrete 1:3:6, type-C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes, etc.) shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as per specified and as directed by Engineer-in-charge.

M&L for concrete bed 1:3:6 type C2 (40 mm graded stone aggregate) to 100 mm dia. drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as per specified and as directed by Engineer-in-charge.

M & L Salt glazed stoneware drain pipes laid in trenches and jointed as specified of 100mm dia pipes, screwed for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 6 to 8 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' hooks complete all as per specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks complete all as per specified and as directed by Engineer-in-charge.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper on surfaces of walls, complete all as per specified and as directed by Engineer-in-charge.

M&L for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard-standing / pavings / plinth protections, finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as per specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 15 mm bore medium grade fixed on wall/floor/trenches, complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe 20 mm bore medium grade fixed on wall/floor/trenches, complete all as specified and as directed by Engineer-in-charge.

Cutting into existing steel tubing for alterations or additions of 20mm dia bore of pipes (Each cut measured) complete all as per specified and as directed by Engineer-in-charge.

S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S & F 20 mm bore stop valve cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S & F 15 mm bore stop valve cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S&F 15mm dia PVC connection pipe with PTMT nuts of length 450mm, complete all as per specified and as directed by Engineer-in-charge.

S&F Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal pot backing with cement complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfsce in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.

S&F Mild steel flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, wind ties, clamps and similar small articles etc. conforming to Fe-290 Gde E-165, complete all as per specified and as directed by Engineer-in-charge.

S&F Rolled Mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment grade Fe-410-w (Gde-E-250) quality-A, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as per specified and as directed by Engineer-in-charge.

M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.

M&L 75 mm thick cement concrete type B-2, 1:2:4 type (using 40 mm graded crushed stone aggregate) as in sub base, complete all as per specified and as directed by Engineer-in-charge.

S & F chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge.

S & F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing including taking down old unserviceable PVC frame with shutter, complete all as per specified and as directed by Engineer-in-charge.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing, complete all as per specified and as directed by Engineer-in-charge.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.

S & F 100 mm long excruded aluminium alloy anodised butt hinges with galvanised mild steel hinge pin type C-21, complete all as per specified and as directed by Engineer-in-charge.

M & L Salt glazed stoneware drain pipes laid in trenches and jointed as specified of 150mm dia pipes, screwed for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

M&L for concrete bed 1:3:6 type C2 (40 mm graded stone aggregate) to 150 mm dia. drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as per specified and as directed by Engineer-in-charge.

M&L for 100mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as per specified and as directed by Engineer-in-charge.

M&L for Septic tank for 25 users excavated in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete all as per specified and as directed by Engineer-in-charge.

M&L for Soakage wells excavated in ordinary Soil, foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM 1:4, RCC cover slab in M-25/ RR masonry / filling with brick bats, of size 1.8 M dia X 3.0M deep, complete all as per specified and as directed by Engineer-in-charge.

M&L for anti termite treatement treating the bottom and sides of excavation at the rate of 5 litre of emulsion per square metre of surface area complete all as per specified and as directed by Engineer-in-charge.

M&L for anti-termite treatement treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as per specified and as directed by Engineer-in-charge.

M&L for anti termite treatment to the soil alongwith external perimeter of bldg at the rate of 2.25 ltr of emulsion per metre of the perimetre wall complete all as per specified and as directed by Engineer-in-charge.

M&L anti termite treatement of soil under existing floor using emulsion @ one litre per hole 300mm apart including drilling and plugging 12 mm dia holes with cement mortor 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as per specified and as directed by Engineer-in-charge.

M&L for RCC (nominal mix) type B-1, 1:2:4 (20 mm graded Agg) as in plinth beams complete all as per specified and as directed by Engineer-in-charge.

All as per serial item No. 119 above but as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as per specified and as directed by Engineer-in-charge.

All as per serial item No. 119 above but as in chajjas complete all as per specified and as directed by Engineer-in-charge.

M&L for formwork to the sides & soffits of concrete floor or roof beams, lintels etc. for fair finished flat surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for formwork to sides and soffits of concrete foundations, plinth beams and similar work for fair finished flat surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for formwork to chajjas and similar items including edges as in fair finished flat surfaces of concrete complete all as per specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as per specified and as directed by Engineer-in-charge.

M&L rendering 15 mm thick in cement (1:4) finished even and smooth without using extra cement on brick surface on external surface with WPC @ 3% by weight of cement complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid seperately.

Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as per specified and as directed by Engineer-in-charge.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as per specified and as directed by Engineer-in-charge.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as per specified and as directed by Engineer-in-charge.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as per specified and as directed by Engineer-in-charge.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as per specified and as directed by Engineer-in-charge.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard-standing / pavings / plinth protections, finished even and smooth without using extra cement including spike rolling to surfaces or making impressions of expanded metal, while the concrete is green, complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position including 20mm bore PVC float valve, complete all as per specified and as directed by Engineer-in-charge.

S&F Vitreous China Squatting pan 'Orissa Pattern' of size 580 x 440 mm white with integral foot rest with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete including making good to floor complete all as per specified and as directed by Engineer-in-charge.

S&F 10 ltrs capacity of PVC flushing cistern, low level white with inlet ball valve float and handle including flushing pipe & bracket complete all as per specified and as directed by Engineer-in-charge.

S&F Vitreous china urinals, half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as per specified and as directed by Engineer-in-charge.

S&F vitreous China coloured wash hand basin of size 130x640x490 mm including cutting pinning with CP waste couling complete all as per specified and as directed by Engineer-in-charge.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as per specified and as directed by Engineer-in-charge.

S&F grating (round) 125 mm size of PTMT (min weight 40 grams) complete all as per specified and as directed by Engineer-in-charge.

S & F sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to floors complete all as per specified and as directed by Engineer-in-charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S SITAL BUILDERS

RAJKAMAL ENTERPRISE