REPAIR AND MAINTENANCE OF SECURITY LIGHTS ROAD LIGHTS SOLAR LIGHTS AND STAND BY GENERATOR SETS AT MADHOPUR UNDER GE BASOLI

Amount

Repair/rectification for street/security light/ perimeter light/ flood light any type, capacity & make to make the security/street lights in serviceable condition as intimated by JE E/M / Engineer -in- Charge after rectification/trace out the fault which includes removing of street/security light fitting from LT/HT PCC/steel tubular/swan neck poles, refixing after repair, tightening of loose connection on ACSR conductor/with bus bar chamber/in DB, replacement of ballast, lamp, ignitor, lamp holder, capacitor, replacement of glass, jumper breakage, replacement of connection wire or any other part and refixing in proper alignment on GI pipe bracket or by other means as per site requirement incl replacement of screws,nut,bollts washers as reqd, proper connection with PVC insulation tape etc complete to keep the light in serviceable condition through out the period of contract by repairing one time all as directed to the entire satisfaction of JE E/M / Engineer-in-Charge Note : (i) Worn out/ damaged/ unserviceable parts to be replaced shall be measured and paid for separately under relevent items of sch 'A' as supply only and fixing is deemed to be included under this item. (ii) All the T&P and transportation required for the work shall be arranged by the contractor which shall be deemed to be included in quoted rate. Contractor shall provide the all type of T & P i.e. tools, insulation tape, ladder any type etc to electrician for attending the complaints. The quoted rate include the cost of minor items i.e. screws, nuts, washers for light fitting etc. (iii) Contractor shall provide & maintain the register regarding 100% serviceability of security lights duly signed by the JE/Engr-in-Charge, contractor, unit rep. (iv) The work will be carried out on day to day at as per direction of JE/ Engr-in-charge. (v) The electrician shall receive the complaint from JE /Engineer -In -Charge on complaint slip and after completion of job the slip shall be deposited to JE /Engineer -In -Charge daily duly signed by users. The printed complaint slip and compliant register shall be arranged by the contractor without any extra cost. (vi) The contractor shall arrange one electrician and one helper in one shift for 0900 hrs to 1700hrs on daily basis except sunday and holidays. (vii) An inventory for the parts/spares which are found unserviceable and requir replacement with new parts/spare shall be prepared and kept in record duly signed by Engr-in-charge and contractor. (viii) In case non deployment/absence of staff from duty recovery @850/- per day for electrician and Rs. 550/- per day for helper shall be recovered from the contractor's dues. The record of presence of workmen with name and details shall be maintained with signature of JE E/M, Engr-in-Charge and contractor. The decision of accepting officer shall be final and binding.

Supply only Driver electronic compact type suitable for LED street light fitting 70 Watt as per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 90 Wattas per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 120 Wat as per sample/required at site complete all as specified and directed.

Supply only LED street light bulb thread/pin type of capacity 30 Watts complete all as specified and directed

Supply only LED street light bulb thread/pin type of capacity 40 Watts complete all as specified and directed

Supply only porcelain Lamp holder suitable for 30/40 watt LED street light bulb fitting thread type complete all as specified and directed.

Supply and fix in repair for street light bracket made to shape at required angle made out of 50mm dia ( light grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair for 2.5 sqmm PVC insulated and sheathed cable twin core aluminium conductor cable from over head conductor to street light fittings complete all as specified and directed.

Supply and fix in repair / replacement LED street light fitting of capacity 45 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 45W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLST145N of make polycab or equivalent in CG/Bajaj/Philips/Halonix

Supply and fix in repair / replacement LED street light fitting of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 60W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLST160N of make polycab or equivalent in CG/Bajaj/Philips / Halonix

Supply and fix in repair / replacement LED street light fitting of capacity 35 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 35W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLST135N of make polycab or equivalent in CG/Bajaj/Philips / Halonix

Supply and fix in repair / replacement flood light of capacity 80 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of cat part No PCGLFT1028057 of make polycab or equivalent in CG/Bajaj/Philips / Halonix with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed by engr-in-charge

Supply and fix in repair / replacement flood light of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of Cat Part No PCGLFT1026057of make polycab or equivalent in CG/Bajaj/Philips/ Halonix complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed

Supply and fixing in replacement PVC conduit 25mm dia medium grade for fixing along the pole with 02 Nos clamps per pole the connections from junction box to street lights all as specified and directed.

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m depth and getting out in any type of soil, complete all as specified and directed .

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified .

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

All as per item No 22 here-in-before but except brick complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

Supply and erect steel tubular swaged pole type 410 SP-31 (9 meter long) complete with cast iron / MS base plate, top plate welded with MS round sheet with necessary nuts, bolts and wahsers duly painted with a coat of red oxide primer and two coat of aluminum paint including black and yellow strip 30cm in height above the coping of the pole complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation & filling of pole/stay, complete all as specified and directed.

Material and labour for Continuous earth wire/guard cradle horizontal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire including dismantling and taking out the damaged broken GI Earth wire in any position complete all as specified and directed .

Material and labour for Aluminium conductor, steel reinforced (ACSR) conductor of any size for OH lines including stretching, binding with aluminium binding wire, jumpers, line taps etc including dismantling and taking out the damaged broken ACSR conductor of any size from service feeder or distribution span in any position complete all as specified and directed.

Supply and Fix for shackle type, polycaronate Insulator incl one galvanised mild steel spindle, two galvanised iron washers,and one galvanised iron nut, 100 mm height, 115 mm dia ,suitable for 1100 Volt complete all as specified and directed.

Supply and Fix for structural steel work as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including , nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one priming coat of red oxide, one under coat , one finishing coat of aluminium paint and epoxy coating, complete all as specified and directed.

Supply and fix for Stay assembly complete with stay rod 20 mm dia and all accessories all as shown in electrical plate No. 1 of SSR Part-I including dismantling and taking out the damaged broken stay assembly in any position and removal for further disposal complete all as specified and directed. Note :- Excavation, earth work and PCC work shall be measured and paid separately under respective items.

Material and labour for loop insulator vitreous porcelain, white,brown or green with overall dimensions 140mm,clearance from hole 25.5 mm complete all as specified and directed .

Material and labour for galvanised stay strand of size 7/4 mm ccomplete all as specified and directed .

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 50 sq mm 3.5 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 25 sq mm 3.5 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 4.0 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 2.0 core complete all as specified and directed.

Supply and fix for DWC high density polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed.

Supply and fix in repair for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 200 mm ampore in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips / Halonix

Supply and fixing in replacement polycarbonate globe prismatic finish of size 250 mm imperial in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips/ Halonix

Supply and fixing in replacement polycarbonate globe prismatic finish of size 300 mm dia in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips/ Halonix

Supply and fixing in replacement polycarbonate globe prismatic finish of size 385x340 mm seattle in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips/ Halonix

Supply and fixing in replacment of smart integrated solar street light LED with built in mono crystalline panel, litheium ferro phosphate battery MPPT charge controller and PIR Sensor with colour temperature 6000 to 6500 K capacity 12 W all in one standard complete.all as specified and directed.

Supply and fixing in replacment of smart integrated solar street light LED with built in mono crystalline panel, litheium ferro phosphate battery MPPT charge controller and PIR Sensor with colour temperature 6000 to 6500 K capacity 15 W all in one standard complete.all as specified and directed.

Supply and fix Off load change over switch four pole with sheet metal enclosure of capacity 100 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections complete all as specified and directed

Supply and fix in repair for bus bar chamber outdoor type, comprising of encloser made out of 3.15 mm thick CRCA sheet of size 0.6 X 0.50 X 0.35 mtr , powder coated with 04 Nos of aluminium bus bar of 100 Amps 1100 volts grade, fixed and including insulators with provn of 04 X incoming/outgoing cable hole and provided with rubber bushes with provn of earth connection duly provided with angle iron frame stand of size 40x40x5 mm with 40 cm grouted in PCC and 40 cm above the ground level in and including with necessary PCC and earth work complete all as specified and directed.

Dismantling and Taking down old U/S PCC LT/Steel pole of any size including earth work , removing the PCCetc complete all as specified and directed

Errecting of steel tubular/PCC LT pole retrieved against the respective item as above complete where required and planted in the earth in PCC (1:3:6) type C2 using 40 mm graded stone aggregate in foundation all as specified and directed. Note :- Earth work and PCC work shall be measured and paid separately.

Dismantling insulators any type, any size and depositng to the same to the MES store yard.

Taking out the old unsv LT/AB cable any type any size 50 Sq mm X 3.5 core to 16Sq mm X 3.5/4 core in any position from pole in any height or passing through pipe heavy duty electric cable all as specified and directed.

JAI DURGA CONSTRUCTION CO

dinesh enterprises

M/S NILESH ENTERPRISES

G.M. ENGINEERING SERVICES

M/S DUGGAL CONSTRUCTION CO

M/S PRAJAPATI ENGINEERS

kailu construction co

Ms International Engineers