Electrification work jobs at Office Complex Ground and Second Floor at Pandrethan Srinagar

Amount

ELECTRIFICATION Part (A) Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole switch of approved quality in modular grid plate and GI box and Earthing of fixtures and the outlet box with 1.5sqmm PVC insulated copper wire

Wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 4 sqmm PVC insulated copper wire in concealed or surfaced mounted PVC conduit including providing and fixing of 16amp 3 pin switched socket of approved make with modular grid plate and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required

Wiring for ceiling fan /wall fan point same as above in item No1 but controlled by electronic stepped regulator and 6amp control switch.

Wiring for 230v ac, 5pin 3x 6 amps socket outlets for light duty power with 230v ac 5/6 amps, SP switch, on same modular grid plate mounting with 2x1.5sqmm PVC insulate copper wire of approve make with modular grid plates and Earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire complete as required

Wiring for 230v ac, 5pin 6 amps socket outlets for light duty power with 2x1.5sqmm PVC insulate copper wire of approve make with modular grid plates and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire complete as required

Wiring for circuits for light/fan/exhaust fans/AC,s etc with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (without Conduits) a) 2x2.5 Sq.mm + 1x2.5Sq.mm

b) 4x6 sqmm +1x6sqmm

c) 4x10 sqmm +1x6 sqmm

d) 4x16 sqmm +1x6sqmm

e) 2x6 sqmm + 1x4 sqmm

f) 4x25 sqmm + 2x10 sqmm

Supplying installation testing and commissioning of pre wired industrial socket including 32 amp SP MCB complete with connection as required

Supplying and fixing of following size dia PVC conduit including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting ,chases and making good or surface mounted including all fixing hardware as required. a) 25mm dia

b) 35mm dia

Supplying and laying of 2 pair telephone wire havells make complete as required

Supplying installation testing and commissioning of pre wired 15 watt led light complete with connection as required

Supplying installation testing and commissioning of pre wired 2’x2’ led light complete with connection as required

Supplying installation testing and commissioning of 2’ led tube light complete with connection as required

Supplying installation testing and commissioning of pre wired celling fan complete with connection as required

Supplying installation testing and commissioning of exhaust fan complete with connection as required a) 200mm

Supplying and fixing following way, Prewired TP&N PPI Distribution Board of Sheet Steel for 415 Volts on surface/Recess complete with Ready to use DBs - Provided with 100A insulated phase bus-bars, neutral bar/s with shroud/s, earth bar/s , sticking saddles , cement spill protector ,color-coded interconnecting wire set , cable ties , blanking plates and circuit identification labels. The D.B should be IK-09 Compliant.(The Cost of D.B is without MCB's)(IP Rating-43) a) 6 way (8 Module Incomer),(2+2+2 incomer DP RCCB),(6+6+6) SP MCB's O/G's)

b) 8 way (8 Module Incomer),(2+2+2 incomer DP RCCB),(8+8+8) SP MCB's O/G's)

Supplying and fixing of following size mcb’s complete with connection as required make Schneider. a) 6-32 amp SP

b) 40 amp TPN

c) 63 amp TPN

d) 40-63 amp DP

Supplying and fixing of following size mcb’s complete with connection as required make Schneider. a) 6-32 amp SP

b) 40 AMP TPN

c) 63 amp TPN

Design, fabrication, assembling, supply, installation, testing, and commissioning of LT main panel out door canopy type suitable for 415 V 3 phase 4 wire power supply system panel shall be fabricated out of 1.6mm thick CRC sheet powder coated free stand, having front doors mounted on angle iron pedestal and necessary wiring and other penal accessories comprising of the following Incomers a) 320 amp 4pole 36ka MCCB (ABB) b) Spreaders links & phase barriers c) Onloadbyepass switch 320A 4pole d) 400 amp TPN Alu BAS BAR e) Digital multifunction meter f) Indication lamps Outgoings g) 200Amp 4p MCCB 36ka(ABB make) h) Spreaders links & phase barriers i) 160Amp 4p MCCB 36k (ABB make)

Design, fabrication, assembling, supply, installation, testing, and commissioning of LT sub main panel for heating (indoor type) suitable for 415 V 3 phase 4 wire power supply system panel shall be fabricated out of 1.6mm thick CRC sheet powder coated free stand, having front doors mounted on angle iron pedestal and necessary wiring and other penal accessories comprising of the following Incomers a) 200 amp 4pole 36ka MCCB (ABB) b) Spreaders links & phase barriers c) 200 amp TPN Alu BAS BAR d) Digital multifunction meter e) CT’s coils f) Indication lamps Outgoings g) 100Amp 4p MCCB 25ka (ABB make) h) Spreaders links & phase barriers

Design, fabrication, assembling, supply, installation, testing, and commissioning of LT sub main panel for lightning and emergency (indoor type)suitable for 415 V 3 phase 4 wire power supply system panel shall be fabricated out of 1.6mm thick CRC sheet powder coated free stand, having front doors mounted on angle iron pedestal and necessary wiring and other penal accessories comprising of the following Incomers a) Onload changeover 160A 4pole b) 200 amp TPN Alu BAS BAR c) Digital multifunction meter d) CT’s coils e) Indication lamps Outgoings f) 63Amp 4p MCCB 25ka (ABB make) g) Spreaders links & phase barriers

Supplying laying of following 1100 volt grade XLPE insulated PVC sheeted aluminum conductor arromed cable as per specification in existing trenches cable trays ducts over bed of sand clamps including fixing bolts connecting testing and commissioning a) 185 sqmm 3.5 core

b) 120 sqmm 3.5 core

M/S A.R. ENTERPRISES

M/S H . L TRADERS

M/S INTERNATIONAL STORES

FIDA DOT COM ELECTRICALS AND ELECTRONICS

EHAN ELECTRICALS/ MECHANICALS

F M INFRASTRUCTURE BUILDERS PRIVATE LIMITED

M/s Muzaffar Ahmad Mir

M/S INGENIOUS ELECTRICAL AND MECHNICAL WORKS