1.AMLA-CHHINDWARA section- Provision of balance Approach Road one side and Drainage at LHS No.PC-10 & AP-28. 2.Improvement to drainage to eliminate water logging in old LHS UNDER ADEN BETUL section.

01-Part (1)(A): AMLA-CHHINDWARA section - Provision of balance Above/

02-Part (1)(B): AMLA-CHHINDWARA section - Provision of balance Above/

03-Part (2)(A): Improvement to drainage to eliminate water Above/

04-Part (2)(B): Improvement to drainage to eliminate water Above/

and Drainage at LHS No. PC-10 & AP-28.

Item- 01 MS item DSR-2023

S No. Item Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in

2.6 width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by

Engineer-in-charge.

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in

2.7 width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

Extra for every additional lift of 1.5 m or part

2.26 thereof in excavation / banking excavated or

stacked materials.

2.36 Extra for levelling & neatly dressing of cum 2500 93.05 232625

6 disposed soil completely as directed by

Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

7 4.3.1 Foundations, footings, bases for columns Sqm 140 392.15 54901

4.3.2 Retaining walls, return walls, walls (any Sqm 2100 842.5 1769250

thickness) including attached pilasters,

buttresses, plinth and string courses fillets,

kerbs and steps etc.

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified grade

of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Fe- Kg 60000 107.85 6471000

16.0 ROAD WORK

16.3 Supplying and stacking at site.

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

16.4 Laying, spreading and compacting stone cum 380 1046.95 397841

aggregate of specified sizes to WBM

specifications in uniform thickness, hand

picking, rolling with 3 wheeled road/vibratory

roller 8-10 tonne capacity in stages to proper

grade and camber, applying and brooming

requisite type of screening / binding material

to fill up interstices of coarse aggregate,

watering and compacting to the required

16.42S CONCRETE PAVEMENTS

Providing and laying design mix cement

concrete of M-30 grade, in roads/taxi tracks/

runways, using cement content as per design

mix, using coarse sand and graded stone

aggregate of 40 mm nominal size in

appropriate proportions as per approved and

specified design criteria, providing dowel bars

with sleeve/ tie bars wherever required, laying

at site, spreading and compacting

mechanically by using needle and surface

16.43 vibrators, levelling to required slope/ camber,

finishing with required texture, including steel

form work with sturdy M.S. channel sections,

curing, making provision for contraction/

expansion, construction and longitudinal joints

(10 mm wide x 50 mm deep) by groove cutting

machine, providing and filling joints with

approved joint filler and sealants, complete all

as per direction of Engineer-in-charge (Item of

joint fillers, sealants, dowel bars with sleeve/

tie bars to be paid separately).

16.43.1 Cement concrete prepared with batch mixing cum 500 10529.35 5264675

16.44 Extra for providing and mixing hardening Litre 1700 55.5 94350

compound of approved quality as per

manufacturer's specification in cement

16.45 Providing and fixing pre-moulded joint filler in per cm 4500 5.3 23850

expansion joints of RCC roads / CC pavements depth

after making the joints dust free with high per cm

pressure air jet cleaners, all complete as per width

direction of the Engineer-in-Charge. (Pre- per

18 moulded joint fillers shall be made of bitumen metre

hot sealing compound impregnated fibre board length

having impregnation more than 35%,

conforming to IS:1838 for fibre board and IS:

1834 for hot sealing bitumen compound grade

Providing and filling in position rubberized

bitumen hot sealing compound for sealing of

16.46 expansion joints in roads / pavements all

complete as per direction of the Engineer-in-

Providing and filling in position rubberized depth

bitumen hot sealing compound for sealing of per cm

19 expansion joints in roads / pavements all width

complete as per direction of the Engineer-in- per

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and laying Non Pressure NP-3 class

(Medium duty) R.C.C. pipes including

collars/spigot jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints

19.35.5 1200 mm dia RCC pipes. (Laying by manual/ Metre 20 9126.2 182524

mechanical means)

Schedule 02-Part (1)(B): AMLA-CHHINDWARA section - Provision of balance Approach Road one side

and Drainage at LHS No. PC-10 & AP-28.

Item- 01 MS item USSOR-2021

S No. Item Description of Item Unit Qty Rate Amount

Providing and laying in position Plain cement

concrete of specified Nominal Mix for

miscellaneous works like side drains,

foundation for OHE masts and other

miscellaneous structures excluding the cost of

Cement, centering and shuttering - All work up

to plinth level :

graded stone aggregate 20 mm nominal size)

Providing and laying in position machine

batched, machine mixed and machine vibrated

Cement Concrete of specified grade as per

approved Design Mix (mixed in Mobile

Concrete Batching/Mixing Plant at site or RMC

from approved plants) using 20mm graded

crushed stone aggregate and coarse sand of

approved quality for the following Reinforced

cement concrete structural elements up to

height of 9.0 m from foundation top level,

including finishing, using Plasticiser in

approved proportions (as per IS:9103), to

modify workability without impairing strength

and durability complete as per specifications

and direction of the Engineer in charge. Note:

1. Payment for cement, reinforcement and

shuttering shall be made extra under relevant

item. 2. Plasticiser shall invariably be used in

approved proportion to increase workability

with minimum possible quantity of cement for

all grade of Design Mix Concrete unless it is

specifically approved citing reasons for not

using plasticiser at the stage of Mix Design and

in that case deduction shall be made as per

3 022070 Providing and fixing Weep Holes in Abutments, Metre 150.00 244.14 36621.00

Wing walls and Return walls etc., of new

bridges with 110mm dia UPVC pipe Type A ISI

marked with all contractor's men, material,

transportation, all taxes as per specifications

and as directed by Engineer-in-Charge.

Supply and using Cement at Worksite

approved brands/makes

Schedule 03-Part (2)(A): Improvement to drainage to eliminate water logging in old LHS under ADEN

Item- 01 MS item USSOR-2021

S No. Item Description of Item Unit Qty Rate Amount

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Earthwork in excavation by mechanical means

(Hydraulic Excavator)/Manual Means for

foundations and floors of the bridges, retaining

walls etc. including setting out, dressing of

sides, ramming of bottom, getting out the

excavated material, back filling in layers with

approved material and consolidation of the

layers by ramming and watering etc. including

all lift, disposal of surplus soil up to a lead of

300m, all types of shoring and strutting with all

labour and material complete as per drawing

and technical specification as directed by

Engineer in charge. Note: This item will be

used for excavation work in connection with

other miscellaneous works also like side drains,

foundation for OHE masts and other

miscellaneous structures in connection with

Gauge Conversion, Doubling, New lines.

Providing and laying in position Plain cement

concrete of specified Nominal Mix for

miscellaneous works like side drains,

foundation for OHE masts and other

miscellaneous structures excluding the cost of

Cement, centering and shuttering - All work up

to plinth level :

3 graded stone aggregate 20 mm nominal

Providing and laying in position machine

batched, machine mixed and machine vibrated

Cement Concrete of specified grade as per

approved Design Mix (mixed in Mobile

Concrete Batching/Mixing Plant at site or RMC

from approved plants) using 20mm graded

crushed stone aggregate and coarse sand of

approved quality for the following Reinforced

cement concrete structural elements up to

height of 9.0 m from foundation top level,

including finishing, using Plasticiser in

approved proportions (as per IS:9103), to

modify workability without impairing strength

and durability complete as per specifications

and direction of the Engineer in charge. Note:

1. Payment for cement, reinforcement and

shuttering shall be made extra under relevant

item. 2. Plasticiser shall invariably be used in

approved proportion to increase workability

with minimum possible quantity of cement for

all grade of Design Mix Concrete unless it is

specifically approved citing reasons for not

using plasticiser at the stage of Mix Design and

in that case deduction shall be made as per

4 022054 Approach slab at formation level, Dirt wall/ cum 1598.84 2568.45 4106540.60

ballast wall at formation level

Supply and using Cement at Worksite

5 025071 Ordinary Portland Cement 43 grade approved MT 703.49 7978.98 5613132.64

Supply of steel reinforcement of approved

brands/makes for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete.

6 025082 Thermo-Mechanically Treated bars of grade Fe- Kg 31680.00 88.90 2816352.00

500D or more of approved brands/makes.

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing & laying non pressure NP-4 Class

RCC pipe with collars, jointing with 1:2 cement

and ordinary sand mortar including testing of

joints, but excluding earthwork with all labour

and material as a complete job. Cement for

mortar will be paid separately.(Pipes of

600mm dia and above will be laid using

Hiring of machinery for minor miscellaneous

works for short duration including

operator/driver, fuel, lubricants and

consumable. The contractor shall arrange all

statutory permits as required by rules and

regulations prevailing in the area of work.

Payment shall be made for actual working

8 211201 JCB Backhoe Loaders 3DX Plus or similar with Hour 120.00 752.64 90316.80

minimum 1.10 cum bucket capacity

Schedule 04-Part (2)(B): Improvement to drainage to eliminate water logging in old LHS under ADEN

Item- 01 MS item DSR-2023

S No. Item Description of Item Unit Qty Rate Amount

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

1 4.3.1 Foundations, footings, bases for columns Sqm 158.4 392.15 62116.56

5.0 REINFORCEMENT CEMENT CONCRETE

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 378 392.15 148232.7

for mass concrete

5.9.2 Walls (any thickness) including attached Sqm 5184 842.5 4367520

3 pilasters, buttresses, plinth and string courses

15.0 DISMANTLING AND DEMOLISHING

15.1S General

15.3 Demolishing R.C.C. work manually/ by cum 504 3551.25 1789830

mechanical means including stacking of steel

4 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.