Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.6 CrAccepted-AOC NEW DELHI | NEW DELHI | DELHI | 110001 | ₹2.6 Cr | L-1 | Accepted-AOC ok |
| 2 | L-2₹25.9 L−₹2.3 Cr (90.0%)Rejected-Finance 143 INDUSTRIAL AREA PHASE 2 PANCHKULA HARYANA | PANCHKULA | PANCHKULA | HARYANA | ₹25.9 L−₹2.3 Cr (90.0%) | L-2 | Rejected-Finance Higher rate |
| 3 | L-3₹2.6 Cr+₹5.3 L (2.04%)Rejected-Finance 322 AGGARWAL MODERN BAZAR C 33 LAWRENCE ROADS DELHI 110035 | DELHI | NORTH WEST DELHI | DELHI | 110035 | ₹2.6 Cr+₹5.3 L (2.04%) | L-3 | Rejected-Finance Higher rate |
Tender Value
₹2.4 Cr
EMD Value
₹4.7 L
Closing Date
20 Apr 2020, 5:00 pmClosed
Rohtak
Executive Engineer Mech Division Rohtak
Supply erection and commissioning of V.T pumps of 5 Cs. and 10 Cs capacity along with Panel , Motors and other allied accessories at various flood sites
2020_HRY_123234_1
990-1006/5A dt 4.3.2020
Open Tender
Pumps/Motors
Supply
180 days
rohtak
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,000
Yes
executive Engineer W.S Mech Division Rohtak
₹4.7 L
Yes
8 Mar 2021
11 Mar 2020
21 Apr 2020
11 Mar 2020
20 Apr 2020
11 Mar 2020
Amount
Supply, Erection & Commissioning of 10 Cs axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. With Y body including MS bend including Flange welding, SS Nut & Bolt etc. complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department
Supply erection & commissioning of Solid Shaft Motor of capacity 50 HP, 1440 rpm, 3 Phase, 440 Volt+- 10% with efficiency class IE2, suitable for fitment with 10 Cs. V.T axial/Mix flow pump type vertical flange mounted as per as per Approved Specifications.
Supply, Erection & Commissioning of LTDB star delta pannel of 250 Amp. capacity Including all accessories as one incomer of MCCB (250Amp) – with 1 no outgoing of 100 Amp MCCB Each & 1 No. MCCB (63 Amp) Outgoing, indicator, relays, meters, Push buttons, bus bars, capacitor bank & Phase protection etc. suitable for operation of 1 No. Motors of capacity of 50 HP and 1 no. Motor of capacity of 30 HP capacity with a stand of MS Channel (1 Feet up from floor) as per Approved Specifications.
Supply, Erection & Commissioning of LTDB star delta pannel of 400 Amp. capacity Including all accessories as one incomer of MCCB (400Amp) – with 2 no outgoing of 100 Amp MCCB Each & 1 No. MCCB (63 Amp) Outgoing, indicator, relays, meters, Push buttons, bus bars, capacitor bank & Phase protection etc. suitable for operation of 2 No. Motors of capacity of 50 HP and 1 no. Motor of capacity of 30 HP capacity with a stand of MS Channel (1 Feet up from floor) as per Approved Specifications.
Supply, Erection & Commissioning of 5 Cs axial/Mix Flow Water lubricated Vertical Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. With Y body including MS bend including Flange welding, SS Nut & Bolt etc. complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department
Supply erection & commissioning of Solid Shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase,440 Volt+- 10% with efficiency class IE2, suitable for fitment with 5 Cs. V.T axial/Mix flow pump type vertical flange mounted as per Approved Specifications.
Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia. both end flanged made of 6 mm thick MS Plate as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)
Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia. both end flanged made of 6 mm thick MS Plate as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)
Providing complete double side plate earthing with 2 earth pits on both sides of Sump Well by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate, connecting this main earthing through copper strips /wires up to motors & panel as per site requirement at RD-100 Meham Drain Vill Bharan.
Providing & laying LT Armoured PVC aluminium cable of size 185 sq. mm, 3 ½ core conforming to IS 7098 -1985 as per approved makes & spec.
Providing & laying LT Armoured PVC aluminium cable of size 95 sq. mm, 3 core conforming to IS 7098 -1985 as per approved makes & spec.
Providing & laying LT Armoured PVC aluminium cable of size 50 sq. mm, 3 core conforming to IS 7098 -1985 as per approved makes & spec.
Third party inspection TPIA charges..
Avon Engineering Company
M/s KRP Engineering Pvt. Ltd.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .