Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹36.2 L+₹2.6 L (7.71%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.5 L+₹8.9 L (26.4%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹44.8 L+₹11.1 L (33.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
WELCOME MAINTENANCE TO ZONE A IN DRDO TOWNSHIP UNDER AGE B/R-I AT GE I RND KANCHANBAGH
2023_MES_596795_1
GE I KBAGH TOKEN 21 OF 2023 2024
Open Tender
Civil Works
Item Rate
270 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹98,000
Yes
5 Jul 2023
19 May 2023
17 Jun 2023
19 May 2023
15 Jun 2023
2 Jun 2023
19 May 2023 - 26 May 2023
Amount
M&L preparation of old decorated surface of walls including removing of existing nails and filling of holes, crack with wallcare putty where required & making good to the surfaces and applying one coat of oil bound distemper complete all as directed.
M&L for complete removal of existing treatment of walls/ ceiling, washing with water and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and as directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT
M&L preparation of old decorated surfaces of wall including corinces, pillasters etc and applying one coat of white wash complete all as directed.
M&L preparation of old decorated surfaces of ceilling corinces, pillasters etc and applying one coat of white wash complete all as directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.
M&L for preparation of old painted Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.
M&L for rendering 10 mm thick in CM (1:3) on concrete surfaces as in ceiling finished even and smooth without using extra cement including taking down cement plaster on any surfaces, hacking for key and scrubbing down with water complete including preparation of surfaces and applying three coat of white wash complete all as directed. Note : Rate quoted shall be inclusive of necessary scaffolding etc up to 4th storyed building.
S&F steel ventilators with top hung shutters fitted with box type hinges including MS peg stays, MS handle and glazing bars dovetailed or welded for receiving glass including painting with one shop coat of zinc chromate primer,and cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded aggregate and making good the disturbed surfaces in CM (1:3) complete including preparation of surfaces and applying two coat of synthetic enamel paint including takingdown existing old ventilator all as specified and directed.
S&F steel window with side hung shutters fitted with box type hinges including MS handles, peg stays, MS guard bar made out of 10 mm squre bar, glazing bars dovetailed or welded for receiving glass and including painting with one shop coat of zinc chromate primer including cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good the disturbed surfaces in CM (1:3) complete including preparation of surfaces and applying two coat of synthetic enamel paint including takingdown existing window complete all as directed.
S&F steel window with side hung shutters without glazing bars fitted with box type hinges including MS handles, peg stays, with MS flat iron 12 mm X 3 mm welded for receiving wire mesh including painting with one shop coat of zinc chromate primer including cutting holes in wall for fixing lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good the disturbed surfaces in CM (1:3) complete including preparation of surfaces and applying two coat of synthetic enamel paint including takingdown existing windows all as directed.
Taking down door chowkhat of area n exc 1.5 sqm each with shutter (without taking off shutter from the frames) complete all as directed.
Taking down door chowkhat of area exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutter from the frames) complete all as directed.
Taking down shutter of any description exc 1 sqm but n.exc 2 sqm complete all as specified and as directed.
S&F 1.25mm thick pressed steel door frame of size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., including PCC filling 1:3:6 type C0 (using 12.5mm graded stone aggregate) filling in the frames complete all as directed.
S&F 1.25mm thick pressed steel door frame of size 125 x 60mmmm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc., including PCC filling 1:3:6 type C0 (using 12.5mm graded stone aggregate) filling in the frames complete all as directed.
S&F solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.
S&F 2nd class hard wood 35 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces The size of rail and stile as per IS :1003 part 1) , kiln seasoned and chemically pressure treated including preparation of surface and applying 2 coats of synthetic enamel paint over a coat of pink primer compolete all as directed.
S&F 2nd class hard wood Glazed skelton shutter 35 mm thick open rebated and prepared to receive , gauze etc. (without sash bars) including preparation of surface and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S&F 35mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.
S&F galvanised mild steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks for wooden doors with nut and bolts suitable for MS beading for steel windows complete all as directed.
M&L in prelaminated particle board 19mm thick, interior grade, prelaminated on one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete including dismantling of existing damaged boarding all as directed.
S&F continuous (piano) hinges of flap width 30mm, mild steel, bright finish or electo galvanised complete all as directed.
M&L 12mm thick plywood,grade type BB fixed with screws to timber frame work all as directed.nd class hard wood plain fillets of cross sectional area exceeding 6 Sqcm but not exceeding 13 sqcm, bull nosed, splayed, chamfered or rounded on one edge or face complete all as directed.
S&F 150mm size aluminium handles, cast type, anodised complete all as directed.
S&F in 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as directed.
S&F in100mm long MS steel butt hinges complete all as specified and as directed.
S&F in repairs single action springs hinges mild steel with steel wire springs stove enameled black 125mm long complete with necessary screws/welding all as directed.
Resecuring the shutters of any description of area exc 1sqm and n exc 2sqm each after carrying out necessary repair complete all as directed.
Taking down shutters of any description of area exc 1sqm and n exc 2sqm each and carry out necessary repair and refixing in other opening complete all as directed.
Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame, glazed with oil putty or fixed with beads and height upto 5 floors and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed.
Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and height upto 5 floors and S&F 3 mm thick frosted glass pin headed and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed.
S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with 2nd class hard wood beading or rion flats suitable for existing wooden doors including making holes/ cutting rusted bolts and nuts on steel windows and provision of new nuts and bolts suitable for MS beading complete all as directed.
S&F in repairs 19 mm dia medium grade powder coated MS curtain rods, with fixing brackets, stops, rollers complete all as directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.
M&L non skid ceramic coloured rectified tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed complete all as directed.
M&L for glazed ceramic tiles of size 300x200x7 mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 as backing coat including dismantling existing tiles along with a backing coat complete all as directed.
M&L Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as specified and as directed.
M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete including cutting,rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed.
M&L for pain cement concrete 1:5:10 type E2, (using 40 mm graded stone aggregate) as in filling of sunken floors including digging out old concrete complete all as directed.
M&L for 10mm thick rendering on concrete/brick surfaces in CM 1:4 duly mixed with water proofing compound @ 2% by the weight of cement and finished even and smooth without using extra cement complete all as directed. Note : water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound complete all as directed. Make:- SCOT NO 1/ ACCOPROOF/ IMPERMO
M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm, 1st Coat (Nitobond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat (Nitobond SBR Chemical 1 ltr, Cement 3 Kg) applied thoroughly without any traces of dirt or laitance as in sunken floors complete all as directed.
Taking down existing IWC along with its cement concrete bedding and P or S trap and S&F Orissa pattern vitreous china squatting pan white of size 580x440mm with integral footrest (Excluding flushing cistern and flush pipes) but including concrete bedding and P or S trap as required including PVC flush pipe, making good all the disturbed surfaces to match the adjoining complete all as directed.
S&F in repairs 10 ltrs capacity PVC flushing cistern high/low level with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed.
S&F in repairs 15mm dia bib tap, short body, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 105gms) complete all as directed.
S&F in repairs 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as directed.
S&F in repairs 15mm dia pillar tap fancty type standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed.
S&F in repairs syphon set suitable for PVC low level flushing cistern of any type complete all as directed.
S&F in repairs vitreous china wash basin, white, flat back of size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as directed.
S&F in repairs brass tubular towel rail, 20mm dia, D type, 60cm long between flanges
S&F in repairs stainless steel sink of 1.0mm thick for kitchen with out drain board of overall size 495x420mm & bowl size of 410x330mmx160mm incl all necessary fixing arrangements as required at site complete all as directed.
S&F in repairs stainless steel sink 1.0mm thick for kitchen with drain board of overall size 915x460mm & bowl size of 410x330mmx160mm incl all necessary fixing arrangements as required at site complete all as directed.
S&F in repair brass chromium plated shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe complete all as directed.
S&F in repairs fancy type 15mm dia stop valves /angle cock / concealed stop cock cast copper alloy chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as directed.
S&F in repairs 15mm dia bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed.
S&F in repairs 15 mm dia pillar tap cast copper alloy with crown or capstan head , chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed.
S&F in repairs 15mm, 20mm & 25mm GI fittings( nipples, elbows, reducers, Tee, sockets and tank nipples etc ) complete all as directed.
S&F in repairs 32mm waste coupling of PTMTsuitable for wash basin/ sink half or full threaded complete all as directed.
S&F in repairs chromium plated waste coupling for kitchen sink 100 TO 150mm dia with combination of ABS plastic and stainless steel comprises of stainer built-in removable strainer will catch any debris or utensils before they clog up your plumbing The strainer also doubles as a drain plug. Simply push down on it to stop water from draining, and pull up to allow water to drain again complete all as directed
S&F in repairs 32mm/38mm waste pipe for WHB,& sink etc complete all as directed.( Length of pipe nexc 1.00mtr)
S&F 15mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed.
S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing pipe complete all as directed.
S&F in repairs MS handles of sides (L/R) stove enamelled black suitable for glazed steel window/ventilator complete all as directed.
S&F in repairs MS peg stay stove enamelled black suitable for glazed steel window/ventilator complete all as directed.
Repair of stuck MS windows and ventilators by removing deposits, rust and applying greese / oil to make shutters and handles functional including welding with box hinges where required complete all as directed.
Cleaning and removal of rust on damaged portion of windows, ventilators & hinges on MS frame and making good by welding n.exc 5 cm length complete all as directed.
Taking out the existing damaged projecting /box type hinges of any size from steel windows and suppy and fixing new projecting /box type hinges as required to match with the existing type and pattern duly welded for normal function/ operation of windows complete all as directed..
S&F in repairs stainless steel plate rack of size 30"x36"x10" made out of 1mm thick sheet complete all as directed. Make:- DIAMOND / ANJALI / NIRALI / JYNA
S&F in repairs CP grating of size 100/110 mm with or without hole including fixing with white cement complete all as specified and as directed.
Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./ 25mm -455gms / 40mm- 690 gms) complete all as directed.
Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs from mouths of circulating pipes etc complete all as directed.
M&L date of cleaning to be written in synthetic enamel paint on all tank, after cleaning, size of letters shall be 50mm in height and text shall be “TANK CLEANED ON DD/MM/YYY”
Demolition of cement concrete in ground floors/pavings n.exc 15cm thick below or above ground level in patches (repairs).
S & F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.
M&L precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate ) in landings cover slabs for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces including necessary form work complete all as directed. Note: Reinforcement shall be measured & paid seperately.
S& Fix in repairs floor door stopper of aluminium alloy boddy with steel spring 150 mm fixed to door complete all as directed .
S&F in repair 150mm size aliminium handles, cast type, anodised complete all as directed.
S&F in repair150mm long aluminium anodised, barrel tower bolts of extruded section complete all as directed.
S&F in repair 100mm long MS steel butt hinges complete all as specified and as directed.
S&F in repairs single action springs hinges mild steel with steel wire springs stove enameled black 125mm long complete with necessary screws/welding all as directed.
M&L for specialised poly sulphide sealant treatment to the terrace/wall cracks as under:- (a) Cleaning of surface (b) Making V grooves (6mm width and depth) (c ) Application of primer one coat (Zoriseal primer/Arbokol AG2 primer/Essar power primer. (d) Filling of groove with two coats polysulphide sealant (Zoriseal/Arbokol/AG2/Essar power seal PS)
M/s K Venkateswara Rao
SRI SAI ENTERPRISES
asmath enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .