CERTAIN REPAIRS TO ALUMNIUM AND WOODEN JOINERY ROLLING SHUTTER COLLAPSIBLE GATE ALUMINIUM PARTITION AND OTHER CONNECTED WORKS UNDER AGE BR II FOR GTRE CDA DSC GE OFFICE COMPLEX BSO AGE EM OFFICE AT BANGALORE

Amount

Taking down chowkats or frames with Shutters (without taking off the shutter from the frame) of area n.exc 1.50 Sqm each and removing from site.

All as per item No 1 here in before, but area exc 1.50 Sqm but n.exc 4.00 Sqm complete

Taking down shutters of area exc 1.00 Sqm but not exc. 2 Sqm each all as directed by EIC and removing from site.

Taking down shutters from frame exc 1 Sqm not exc 2 Sqm each resecuring or easing and adjusting and refixing in same opening and finish the surfaces to match with existing surfaces

Taking down shutters from frame exc 2 Sqm each resecuring or easing and adjusting and refixing in same opening and finish the surfaces to match with existing surfaces

S & F in opening Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet rein forced with MS square bar tube, as per specification & drg make : Rajshri / Sintex.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and as directed

S&F 2nd class H/W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed

S & F factory made 35mm thick IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guage etc, size of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) complete all as specified.

S&F 35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by EIC

Supply and fix 40mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed

S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers, complete all as specified and as directed

S&F mild steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F aluminium anodised cast type handles 150mm long all as specified and as directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F door stopper of rubber and aluminium alloy body, 150 mm size all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed

S&F in repairs Aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.

S & F in repairs aluminium anodised barrel towel bolts of extruded section of length 150 mm all as specified and as directed.

S & F in repairs 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections all as specified and as directed.

S & F in repairs mild steel butt hinges medium weight cold rolled mild steel of size 100 mm by welding to existing frame all as specified and as directed.

S & F in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm all as specified and as directed.

S & F in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

Dismantling structural steel work including doors, gates, railings etc but excluding framed truss etc.

S&F collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top & bottom runners, brass handles etc., as specified, erected in position & securing runners with holdfasts & brackets, complete all as specified and as directed

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; push pull or manual type Thickness of laths 1.25 mm complete all as specified and as directed

S&F safety lever locks mild steel with 4 leavers for rolling shutters complete all as specified and as directed

S&F ball bearing for rolling shutters complete all as specified and as directed

M & L for welding in repairs to steel windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6mm complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc. 10 cm in width or girth over a coat of red oxide zince chrome primer complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed

M&L applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed

Dismantling of aluminium partition / windows of any size and any description complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified.

M & L 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work in cup board shutters / aluminium partions etc complete all as specified and as directed

S&F pinhead sheet glass, 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified and as directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane all as specified and as directed.

Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work ( New length of frame re puttied shall be measured )

S & F in repairs 7 mm thick aluminium grill of make "Deco grill" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed.

S & F in repairs Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S & F in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

S&F fixing black/golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer complete all as specified and as directed

S&F venetian blinds, vertical type, 100 mm slot width of approved fabric and powder coated aluminium top railsetc complete all as specified, including dismantlilng old damaged one completecomplete all as specified and as directed. Note:The colour,design and shade shall be as approved by GE.( Make Vista/Amar)

Taking down steel rolling shutters of any area and any description including one coat of Synthetic enamel paint, top cover with all parts such as shaft, spring, ball bearing, drum, CI pulley complete from brackets, channel etc greasing and replacing worn out parts as directed by Engineer-in-Charge and re-fixing the same after realigning the shaft/guide channel, welding drum cage, servicing the components for smooth functioning complete all as directed by the Engineer-In-Charge. Note: Parts replaced will be measured and paid seperately

Supply only Hood cover

Supply only safety lever locks mild steel with 4 levers for rolling shutters

Supply only ball bearing

Supply only anchoring rod

Supply only channels / guide rails

Supply only 1.25mm thick laths

Taking down collapsible steel gates/shutters consisting of channel, pickers, pivoted flat bars, top and bottom runners for servicing and checking its function including fixing only new wheels, top and bottom channels, cleaning and greasing of wheels and channels etc., complete and fixing in its original position complete area exc 4.00 Sqm and n.exc 10 Sqm each.

Supply only 50 mm dia galvanised iron pipe heavy duty (ISI marked) suitable for suspension shaft for rolling shutter (length exc 2m and not exc 6 m) complete all as specified and as directed

Supply only helical spring for counter balancing the rolling shutter made out of high tension springs, 115mm bore and 600mm long complete all as specified and as directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Providing and fixing of false ceiling system with fine fissured edge tiles having humidity resistance(RH) of 95% NRC 0.34, light reflectance approx 84%, Thermal conductivity K=0.052- 0.057 W/MK, colour white, fire performance of class-I as per BS 476 part 6&7 in module size 600x600x16 mm thick suitable for green building application with recycled content of 38-41% with Armstrong silhoette profile exposed grid system with 15 mm white flanges incorporting a 6 mm central reveal in white/black colour. Silhoutte, main runners & cross Tees to have mitred ends & "birdsmouth" notches to provide mitred cruciform junctions. The Tee sections have a galvanizing of 170 grms per m2 & passed through 500 hrs of salt Test.The main runner spaced at 1200 mm c/c should be securely fixed to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstrong suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall (Make :Armstrong/Saint Gobain or equavalent).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises

M&L Vitrified ceramic tiles of size 10 mm thick coloured/dark shade,double charged area of each tile exceeding 0.36 sqm and n exc 0.42, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick coloured/dark shade,double charged area of each tile exceeding 0.36 sqm and n exc 0.42, in skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

Servicing of aluminium sliding / Side hung window / door shutters of any type including renewal of worn out parts like rubber beading, rollers, handles, hinges, locks, etc including necessary form work if required complete all as specified and as directed.

shri veerabadreshwara enterprises

ROHAN BUILDERS

ADWITHI

Lucky Enterprises

TECKXPERT ENTERPRISES

Sreyas Enterprises