SHIFTING OF 11KV AND LT LINE from Kotwali to Aligarh City boundary against sanctioned package No. 02 under Deposit Head for Aligarh-Ramghat Road widening MDR-105 ON SEMI TURNKEY BASIS

Safe carriage of following materials from Store centre or any other place to the respective site of work through the Kachha/Pacca road including loading, unloading at the respective ends and erection of same including the work of dragging as per site requirement, jumphering of Transformer with 11 KV line through LT ABC cable, Weasal conductor etc. Cost of labour, T&P carrier etc. required for proper completion of work as per RESPO Norms is included in the work.

09Mtr. STP Pole

11Mtr. STP Pole

11 KV D.O. Fuse Set

11 KV Fuse Set

11KV TPMO Complete

Stay Set Complete

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting 45KN

11 KV Disc Insulator

11 KV Disc Fitting

V- Type Cross Arm

Earthing Complete

L.T. PVC Alu. Cable 3.5x240sq.mm.

L.T. PVC Alu. Cable 3.5x70sq.mm.

L.T. XLPE Alu. Cable 3.5x150sq.mm.

L.T. A.B. Cable 3x120sq.mm.

ACSR Dog Conductor

Distribution Box with clamps

Supply, fixing and erection of following materials as per site requirement as per RESPO Norms:-

Top Channel size 125x65x2240 mm. with Clamp, Nut, Bolt & Washers

Dropper Channel size 100x50x2028 mm. with Clamp, Nut, Bolt & Washers

M.S. Angle (T/F Base)

Cross Bracing MS Angle

L.T. Incoming Panel with metering equipment & fixing arrangements

Barbed wire

Stone Pad 300x300x75mm.

Holding clamp with nut & bolt

PG Clamp with nut & bolt

Danger Board with Clamp, Nut & Bolt

Number Plate with Clamp, Nut & Bolt

F-Clamp

Al. Winding wire

Alluminium Paint

Red Oxide Paint

Al. Lug long barrel off-size

ABC Connector 3x120sq.mm.

Dead End Clamp with I-hook

Suspension Clamp with I-hook

Concreting of Stay

Concreting of Support

After dismentling of 25 KVA & 63 KVA Distribution Transformer from old site, safe carriage to the respective site of work including loading & unloading at the respective ends and mounting/placement on double pole/plinth including proper jumpering from 11 KV line to the transformer and also connecting the LT site cables as per RESSPO Manual.

After dismentling of 100 KVA & above Distribution Transformer from old site, safe carriage to the respective site of work including loading & unloading at the respective ends and mounting/placement on double pole/plinth including proper jumpering from 11 KV line to the transformer and also connecting the LT site cables as per RESSPO Manual.

Earthing for Distibution Transformer installed at various places by digging of pit upto water level depth and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Dismantling and removal of following material from the existing line and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work.

Dismentling of old & used ST Pole

Dismentling of Iron Scrap

Dismentling of Damaged Dog & Weasel Conductor

Dismentling of Damaged L.T. AB Cable

Please Enable Macros to View BoQ information