Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.5 LAccepted-AOC | ₹43.5 L | 1 | Accepted-AOC Lowest Tenderer |
| 2 | 2₹46.4 LRejected-AOC | ₹46.4 L | 2 | Rejected-AOC . |
| Sl No | Description | Qty | Unit | B. Vinothkumar L1 | V.Jeyaraj L2 |
|---|---|---|---|---|---|
| 1.01 | Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidate and depositing the surplus earth in all places shown by the departmental officers with initial lead and lift etc., complying with standard specification asperSS20 B. | 75.73 | Cum | 263.7 ₹19,970 | 281 ₹21,280.13 |
| 1.02 | Plain Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification. | 33.72 | Cum | 5,599.1 ₹1.9 L | 5,969 ₹2.0 L |
| 1.03 | Supplying and filling in foundation and basement with filling sand layers not more than 15 cm thick well rammed watered and not compacted complete complying with standard specification. | 18.02 | Cum | 1,924.4 ₹34,677.69 | 2,051 ₹36,959.02 |
| 1.04 | Supply of Well Gravel including cost and conveyance, stacking to Departmental gauge for taking premeasurements etc., complete as per standard specification. | 75.37 | Cum | 166.5 ₹12,549.11 | 178 ₹13,415.86 |
| 1.05 | Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification. | 38.03 | Cum | 6,227.7 ₹2.4 L | 6,639 ₹2.5 L |
| 1.06 | 1st Floor | 27.26 | Cum | 6,320.6 ₹1.7 L | 6,738 ₹1.8 L |
| 1.07 | Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification. | 92.14 | Sqm | 501.5 ₹46,208.21 | 535 ₹49,294.90 |
| 1.08 | AGL | 466.31 | Sqm | 1,095 ₹5.1 L | 1,167 ₹5.4 L |
| 1.09 | Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification | 7,095.54 | Kg | 91.8 ₹6.5 L | 98 ₹7.0 L |
| 1.10 | Reinforcement concrete 1:11/2:3 using 20mm, gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc. shall be finished smooth with CM 1:3 12mm thick and with kraft paper without claiming extra etc. as directed by the Departmental officers complete complying with standard specification. | 44.04 | Cum | 9,463.8 ₹4.2 L | 10,089 ₹4.4 L |
Tender Value
₹50 L
EMD Value
₹50,000
Closing Date
12 Dec 2025, 3:00 pmClosed
Project Director
1st floor, DRDA, Theni
Construction of New Rearing Building in Sericulture seed Farm at Myladumparai under Tamilnadu Public Fund Tracking System 2025-2026
2025_RDTN_629203_1
2202/2025/D6 Dated 04.12.2025
Open Tender
Civil Works - Buildings
180 days
Theni
As per tender document
4 documents required · 4 mandatory
₹0
₹50,000
13 Jan 2026
5 Dec 2025
12 Dec 2025
5 Dec 2025
12 Dec 2025
5 Dec 2025
Amount
Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidate and depositing the surplus earth in all places shown by the departmental officers with initial lead and lift etc., complying with standard specification asperSS20 B.
Plain Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.
Supplying and filling in foundation and basement with filling sand layers not more than 15 cm thick well rammed watered and not compacted complete complying with standard specification.
Supply of Well Gravel including cost and conveyance, stacking to Departmental gauge for taking premeasurements etc., complete as per standard specification.
Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification.
1st Floor
Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification.
Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification
Reinforcement concrete 1:11/2:3 using 20mm, gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc. shall be finished smooth with CM 1:3 12mm thick and with kraft paper without claiming extra etc. as directed by the Departmental officers complete complying with standard specification.
St Floor
Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Plastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.
Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.
Supply of steel door 1.50 x 2.10
Supply of steel door 0.75 x 2.10
Supply of steel window 1.20 x 1.30
Supply of Ventilator 0.90 x 0.45
Supply of Ventilator 0.60 x 0.45
Painting two coat over old wall surface with approved quality of Oil bound distember with colour mover okne coat of white cement for priming coat for base including preparation of old colour washing surface and all materials, labour charges etc
Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works )
Painting TWO coat of enamal paint new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification. (The paint should be got approved by the departmental officers before use on works)
Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification. Drainage
Plain Cement Concrete 1:3:6 Using 20 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification. Drainage
Wiring with 2 x 1.50 sqmm ( 22/0.3 ) PVC insulated SC unsheathed cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour for open PVC light / fan point ( for electronic regulator ) ( 5 points per coil ) SD 18
Wiring with 2 x 1.50 sqmm ( 22/0.3 ) PVC insulated SC unsheathed cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin, 2 pin combined non inter locking with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for open PVC plug point ( for electronic regulator ) ( 5 points per coil ) SD 34
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tupe with PVC unsheathed copper lead from terminals to the fitting SD 83 (Tube light fitting)
Cost, supply and fixing of 48" Ceiling fan with Regulator
Supply and run of 4 of 4 sqmm ( 56/0.30 ) PVC insulated Single wire multi strand fire retardent flexible copper cable with ISI mark conforming to IS :- 694 /1990 for 3 Phase
Supply and fixing 6 way SP DB 16A DPIC switch of 500 V ( side lendle ) with F & N on suitable TW board with PWD earthing
Provision for IWC
Providing and supplying of Defogger Machine (Sub Estimate)
Supplying and fixing of Silver Af2000Nk Agrimate Fogging Machine including cost of materials to site and all other labour charges
Providing and supplying of Hook with Gunny Bag Arrangements (Sub Estimate)
Supplying and fixing of Gunny Tape / Kithan for mulberry larva bed including cost of materials to site and excluding labour charges
Supplying and delivery of M-2932 Brass hooks with rings including cost of materials to site and excluding labour charges
Labour charges for fixing of Hook with gunney bag including cost of materials to site and all other labour charges (carpentar I class)
Supply and delivery of Electric Monoset centrifugal pump conforming to IS 9079:2002 as amended from time to time, with CI FG 200 Casing, hydraulically and dynamically balanced Bronze grade LTB-2 impeller, impeller ring and casing ring, stainless steel shaft capable of discharging required quantity of water against a total head noted below due to all causes. Pump shall of BEE 3 Star Rated and capable of discharging the specified quantity at the head noted at the minimum NPSHA at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V+/- 10%, 50 Hz +/- 5%. Squirrel cage induction motor for continuous operation.100*20 LPM
Provision for Rainwater Harvesting Arrangements (Sub Estimate)
Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm. thick hard stiff clay, stiff black cotton soil, hard red earth, shale murams, gravel stony earth and earth moods with 50% (Fifty percent) fair size boulders and hard gravely soils (SS20B)
Providing the precost RCC rings 1200mm dia including cost and other charges etc.
Providing the precost RCC cover slab 1200mm dia including cost and other charges etc.
110mm PVC pipe
110mm PVC Tee
110mm PVC Bend
110mm PVC Elbow
110mm PVC Coupling
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for overall quoted amount (for Construction) above this row in column "BB" for all works in this package}
V.Jeyaraj (BID ID -1529832)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Tendernotice_2.pdf
PDF • 0.49 MB
BOQ_752400.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid