SPL REPAIR/ REPLACEMENT OF OH LINES UG XLPE CABLES IN MT AREA OF AD REGT AND CONNECTED LT FEEDER AREA AND OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Supply & laying LT UG XLPE insulated heavy duty electric cable with Aluminium Conductor 1100 Volt grade of size 3.5 core 240 sqmm laid in trenches, passing through pipes,fixed with wall etc and testing complete .

Ditto all as per item No. 1.00 above, but of size 150 Sqmm 3½ core

Ditto all as per item No. 1.00 above, but of size 50 Sqmm 3½ core

Ditto all as per item No. 1.00 above, but of size 35 Sqmm 3½ core

Ditto allll as per item No. 1.00 above, but of size 25 Sqmm 3½ core

Ditto all as per item No. 1.00 above, but of size 16 Sqmm 4 core

Ditto all as per item No. 1.00 above, but of size 10 Sqmm 4core

Ditto all as per item No. 1.00 above, but of size 06 Sqmm 4core

Ditto all as per item No. 1.00 above, but of size 06 Sqmm 2core

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site.

M & L for boring hole under the road / pavement / hard standing with the help of trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 100mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified & directed by Engineer-in-charge.

M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thickness buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth strip 32x6 mm as earthing strip by means of GI bolts, nuts, check nuts and washers incl surrounded on all sides by 15cm thick layer of charcoal dust, salt, incl earth strip protected by 40mm dia GI light grade pipe, PCC pit of 1:2:4 & reinforced PCC top cover 50mm thick, earth pit angle frame of size 25mmx25mmx3mm with excavation and earth work in any type of soil, light grade GI watering pipe 20mm dia with funnel and wire-mesh complete all to as shown in electrical plate no 3 of SSR Part I 2020 connected main switch board or as reqd at site all as specified and testing on completion.

M & L in replacement Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thickness buried directly in ground (earth pit not less than 2.25meters deep below ground level) with top edge of the plate not less than 1.5meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of GI bolts, nuts, check nuts and washers incl surrounded on all sides by 15cm thick layer of charcoal dust, salt, incl earth wire protected by 15mm dia GI light grade pipe, PCC pit of 1:2:4 & reinforced PCC top cover 50mm thick, earth pit angle frame of size 25mmx25mmx3mm with excavation and earth work in any type of soil, light grade GI watering pipe 20mm dia with funnel and wire-mesh complete all to as shown in electrical plate no 3 of SSR Part I 2020 connected main switch board or as reqd at site all as specified and testing on completion.

S&F junction box complete with fixing accessories. The Junction Box shall be insulated and made out of Polycarbonate with glass fiber reinforced. The Polycarbonate JB shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive. The Junction Box Mini. Size 160 x 200 x 98mm. The Junction Box with Knock out on four side wall. The Junction Box shall be rated for Degree of Ingress Protection IP 66 in accordance with IEC 60529. The gasket material shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall be complies with requirements of the standards IEC 60998-1& IEC 60998-2-1, with one number 10 Amp MCB SP 10KA.

M&L for replacement of PVC insulated PVC sheathed copper conductor cabe of 0.75 Sqmm, 3 core with steel conduit complete for street light and making connections all as specifed and directed.

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories. (a) Bus bar made of aluminium suitable for capacity 400 Amps, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow,blue and black ) fixed on porcelain insulators with necessary nuts and blots and washers etc

INCOMING - (a) MCCB 250 Amps, 4 pole, 35 kA with energy metering devices Adjustable Thermal magnetic, Ics = 100% Icu, 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolt or other fixing accessories complete. -01 No. (b) meters with LCD display , accuracy class 1.0, Aux supply 44-277Vac/dc, having parameters KW, KWh/ KVA, KVAh/ KVAr, KVArh & PF, Run hrs, On hrs & interrupts with RS 485 port, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No (c)Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set OUTGOING:- (a) MCCB 200 Amps, 4 pole, 35 kA Adjustable Thermal magnetic, Ics = 100% Icu, 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolt or other fixing accessories complete- 01 No (b) MCCB 63 Amp, Adjustable Thermal magnetic, Ics = 75% Icu 4 Pole 415 V 16 KA - 03 nos (c) Street light Astronomical Digita timer switch 32 A with time set facility -01 Nos with Contactor 3 Pole 32 Amp-01 No with MCB TPN 40 Amp -01 No

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories. (a) Bus bar made of copper suitable for capacity 200 Amps, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and blots and washers etc

INCOMING - (a) MCCB 100 Amps, 4 pole, 25 kA with energy metering fixed thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories complete -01 No. (b) Energy meters with LCD display , accuracy class 1.0, Aux supply 44-277Vac/dc, having parameters KW, KWh/ KVA, KVAh/ KVAr, KVArh & PF, Run hrs, On hrs & interrupts with RS 485 port, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set OUTGOING:- (a) MCCB 63 Amps, 4 pole, 16 kA with fixed thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories completee - 02 No (b) MCB TPN 40 Amp 415 V 10 K - 04 nos (c) MCB SPN 40 Amp C series 10 KA - 04 Nos

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories (a) Bus bar made of copper suitable for capacity 150 Amps, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and blots and washers etc

INCOMING - (a) MCCB 100 Amps, 4 pole, 25 kA with energy metering fixed thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories completee -01 (b) Energy meters with LCD display , accuracy class 1.0, Aux supply 44-277Vac/dc, having parameters KW, KWh/ KVA, KVAh/ KVAr, KVArh & PF, Run hrs, On hrs & interrupts with RS 485 port, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set OUTGOING:- (a) MCB TPN 40 Amp 415 V 16 KA C series - 02 nos (b) MCB SPN 40 Amp C series - 4 Nos (c) Street Light astronomical Digital Timer 32 A -01 No (d) Contactor 3 P 32 Amp -01 No

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories.

INCOMING - (a) MCCB 100 Amps, 4 pole, 25 kA with energy metering fixed thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories completee -01 (b) Energy meters with LCD display , accuracy class 1.0, Aux supply 44-277Vac/dc, having parameters KW, KWh/ KVA, KVAh/ KVAr, KVArh & PF, Run hrs, On hrs & interrupts with RS 485 port, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set OUTGOING:- (a) MCB TPN 40 Amp 415 V 16 KA C series - 02 nos (b) MCB SPN 40 Amp C series - 4 Nos (c) Street Light astronomical Digital Timer 32 A -01 No (d) Contactor 3 P 32 Amp -01 No

Supply, install, testing and commissioning of Feeder pillar, outdoor type weather and vermin proof totally enclosed made out of 3.15 mm thick CRCA sheet machine preesed of suitable size, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hz comprising with following complete all as specified:- (a) Bus bar made of aluminium suitable for capacity 100 Amps, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and blots and washers etc INCOMING - (a) MCCB 63 Amps, 4 pole, 25 kA with fixed thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories completee -01 No. (b) Energy meters with LCD display , accuracy class 1.0, Aux supply 44-277Vac/dc, having parameters KW, KWh/ KVA, KVAh/ KVAr, KVArh & PF, Run hrs, On hrs & interrupts with RS 485 port, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set OUTGOING:- (a) MCB SPN 40 Amp C series 415 V 10 KA - 10 nos

Supply, installing, testing and commissioning in-replacement LT Panel, Indoor type cubicle type weather and vermin proof totally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size, suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz double door with front and rear openable with locking arrangement including inner independent enclosures for all switches/ MCCBs/ metering equipments with hinged (bottle type) shutters, bottom gland plate with sufficient numbers of circular cable entry holes with cable glands of suitable size of cable & with suitable cable glands as per number of outgoings, prewired complete duly powder coated with 7 tank process with base frame made of angle iron 50 mm x 50 mm x 6 mm, legs 100 cm long having openable apron on all three sides of panel 30 cm wide and grouted 45 cm in PCC (1:3:6) type C-1 including brick masonary platform 45cm above ground level all as specified and directedby Engr-in.charge, comprising with following complete:- (a) Bus bar suitable for 3 phase, 415 volts, 50 Hz, 4 wire system of rating 900 Amps made out copper strip of suitable size (strip size be based on 1.5 Amps per sqmm), with coloured heat shrinkable sleaves in four colours (Red, yellow, blue and black) fixed on resin cast insulators including galvanised nuts, bolts and washers etc fitted with and including the following :-

(ii) INCOMING : - (a) ACB 4 Pole, 415 V, 630 Amps 50 KA designed operational voltage 690 V, Horizontal drawout type motorized front operated with microprocessor -based protection release having password protection adjustable over load ,short circuit ,earth fault protection,the ACB shall have Ics=Icu=Icw for 1 Sec.ACB shall have over temperature protection features with 4 NO/NC auxiliary contacts.ACB shall also confirm to IEC 60947/IS-13947/Part-Ii 19993 latest version,protection unit must be with display to see current parameters & fault history with USB port to acess stored DATA of the release,Breaker shall be equipped with pre overoad and over temperature alarms.- 01 No (b) Panel meter of size 96x96 mm with LCD display , accuracy class 1.0, having parameters Voltage, Current, Frequency, Power factor, Power & Energy with RS 485 including suitable CT complete all as specified, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete. (c) Indicator with LED lamps for RYB , 3 Phase with MCBs set of three -01 set

(iii) OUTGOING:- (a) MCCB 250 Amp, 415 V, 25 KA, 4 pole with energy metering adjustable thermal magnetic releaseICS=100%ICU. -02 Nos. (b) MCCB 200 Amp, 415 V, 36 KA, 4 pole with energy metering adjustable thermal magnetic releaseICS=ICU100%. -01 Nos. (c) MCCB 160 Amp, 415 V, 25 KA, 4 pole with Energy metering thermal magnetic release, ICS=100%ICU. -01 Nos. (d) MCCB 100 Amp, 415 V, 25KA, 4 pole with thermal magnetic release, ICS=100%ICU. -01 Nos. (e) Spare space for MCCB 160 Amp-01 No (f) MCCB 63 Amp, 415 V, 16 KA, 4 pole with thermal magnetic release, ICS=100%ICU.-01 Nos (g) MCB TPN 40 A 16 KA -01 No (h) Indicator with LED lamps for RYB , 3 Phase set of three -01 sets

Takign down ACSR of any type and any size by opening binding wires, removing outgoing electric connections by opening cable connections, removing spacers as directed by Engr-in-Charge.

Taking down/ out unserviceable UG cables of any cross sectional area, any type, any make from trench/ from wall/pole/fixed with walls/ incl pulling through pipe by opening connections and joints including removing pipe, carefully getting out bricks etc keeping aside for re-use complete all as specified and directed. Note : Earthwork shall be measured and paid under relevant items of BOQ.

Laying only seviceable LT Cable up to 50 sq mm obtained from site.

Supply and fix GI pipe 50 mm bore medium grade for protection of cable including provn of PVC heavy duty bends complete for fixing along GI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred by Engr-in-Charge.

Supply and fix GI pipe 40 mm bore medium grade for protection of cable including provn of PVC heavy duty bends complete for fixing along GI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred by Engr-in-Charge.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

Supply and installation hot dip galvanized octagonal poles 7 m long top Dia(A/F) 70mm, bottom dia (A/F) 130mm,having sheet thickness 3mm base plate 200mmx200mmx12mm (LXBXT) including bolt size 4x20mm(no. x dia), 200mm pitch circle dia 600mm bolt length , 100mm projected bolt length having door opening of size having door opening of size 90 ×500mm above from GL and having hot dip galvanized single arm plane bracket 1000mm long for pole having top 70mm A/F , for mounting street light fitting fixed on top with nut and bolt washers including provision of cable connector for three phase supply and one no MCB SP of 0.5A to 6A complete alongwith necessary earthwork,PCC with iron work all as specified by the manufacturer as approved by GE and as directed by Engineer in charge.Make : Bajaj model no BOP-7030 or equivalent make of M/s Surya,M/s HPL.

Supply & Fixing of PVC insulated three core wire copper conductor 1100 Volt grade of size 1.0 Sqmm drawing through octagonal pole for connection purpose complete all as specified and directed by the Engr-in-Charge.

S & F LED street light fitting 45 watts,made up of pressure die-cast aluminium housing with toughened glass/PC embedded lens with mandatory secondary optics lenses, with SS screws, IP-66, luminaire efficacy 100Lm/W min, overall 4500 lumens min, CCT 5700K ANSI, CRI>70, THD<10%, PF >0.95, LED source : Hi power LED 3 to 5W, having external potted Constant Current driver moisture resistant with internal surge protection 4KV having under voltage, over voltage, phase to phase protection and short circuit protection and auto recovery mode, operating range 150 V to 270 V AC at 50Hz, Auto Cut off >300 V and with separate external Surge protection device 10 KV, suitable for fitting on 40 mm dia bore pipe bracket including making connections with PVC insulated 3 core copper conductor cable 0.75 Sqmm min of suitable length complete all as specified. Note - The contractor shall ensure the light fitting dia should be suitable for 40 mm dia bore pipe. contractor shall quote his rate accordingly. Make: Polycab/Osram/Philips,Crompton

Supply & Fix Astronomical Digital timer switch for switching on/off lights according to rising/setting of the sun with combination function for creating switching programs in which devices are switched according to astronomical time and/ or fixed preset time, current capacity 16A, weekly program with 1 changeover (1 CO), Total 28 programs min complete in powder coated CRCA sheet enclosure of suitable thickness with MCB TPN 32 Amp min, 3 pole contactor 32 Amp and MCB for manual switching of lights, fixing arrangement i.e. DIN rail complete with necessary porcelain insulator for incoming and outgoing cable connections with reqd clamp duly painted to fix on pole complete all as specified and directed. Make of timer switch : Siemens /Schneider/ L&T/ Legrand

Supply & fix new MS Cross arms, bracing, supports, clamps, anti climbing device and back plates fabricated from structural steel section including nuts, bolts, washers with reqd mech working/ process i.e. cutting, welding, bending, cold or hot, drilling holes, grinding or bolt in any shape or size including 2 coats of aluminium paint over one coat of red oxide including taking out unserviceable complete all as specified and directed by Engineer-in-charge. Note : Unexposed surface shall be given one coat of primer only.

Northern cable fault locatoers (BID ID -3442658)

SUN MANN ENGINEERS (BID ID -3442500)

Kaul Enterprises (BID ID -3442677)

Gupta Enterprises (BID ID -3448482)

CHOUDHARY AND SONS (BID ID -3448598)

UNITED ENGINEERING CORPORATION (BID ID -3438257)

JAI DURGA CONSTRUCTION CO (BID ID -3438721)

R K ENTERPRISES (BID ID -3440696)

M/S Inder Pal Singh (BID ID -3442413)