PressNIT14Item1

Supply of 1200 mm dia. M.S. Pipe and specials 18 Meter fabricated out of 12 mm thick M.S. plate painted with anticorrosive bituminous paint.

Supply of 450 Bend 1200mm dia 4 Nos.

Supply of M.S. Flange 1200mm dia.

Supply of M.S. Flange 150mm dia.

Supply of Sluice Valve 150 mm dia. Make :- Kirloskar/IVC/Dorot/VAG

Supply of Air Valve Temper Proof 150 mm dia. Make:- Kirloskar/IVC/Dorot/VAG

Supply of Nut Bolt.

Supply of Neoprene Rubber Sheet.

Hydraulic Excavator (3D) with driver and fuel. DSR-2019, 0020

Generator 100 KVA/125 KVA for lighting purpose. (2 nos x 24 Hrs) DSR-2019, 0070

Hire and running charges of crane 20 tonne capacity. DSR-2019, 0028

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. DSR-2019, 14.23

Welding by gas or electric plant including transportation of plant at site etc. Complete. Welding of 1200mm dia M.S.Pipe by double layer welding from inside & outside to make the joint leak proof. Welding of window by double layer welding from outside and after completion of work. Testing of welding joints on operating pressure of line. DSR-2019, 10.22

Fixing of M.S. gap piece 1200 mm dia. in place of existing pipe including taking out the existing portion of DI pipe and replacing with new MS gap piece along with the help of man and material power and necessary lighting arrangement at site for workable condition.

P/F 2.00 Mtr. High MS sheet barricading with frame of angle iron 40X40X6 mm every post to be welded with MS channel I.S. LC 100X50X6.4 mm horizontal i/c making holes in the channel and for providing embedding of 16 mm dia round basis in the road as per drawing.

Making/fitting/alignment of Flange joint of 1200mm dia MS line with the help of nut bolts, neoprene rubber sheet etc with the help of fitters , hydraulic jacks & tool & tackle as per site requirement.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work will be paid separately). DSR-2019, 16.75

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand). DSR-2019, 6.1.1

Frequent transportation charges for T&P, men and material to & fro including loading & unloading.

Shifting of old pipe from site to Haiderpur Plant including loading and unloading.

M/S BRIJ BHUSHAN SHARMA