REPAIRS TO WOODEN STEEL AND PVC JOINERY AT

Amount

Taking down wooden frames with shutters without taking off shutters from the frame of area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down wooden frames with shutters without taking off shutters from the frame of area exc 1.5 Sqm and n.exc 4Sqm each complete all as specified and directed.

Taking down shutters only n.exc 1 Sqm complete all as specifed and directed.

Taking down shutters only exc 1 Sqm but n.exc. 2 sqm complete all as specifed and directed.

Refixing of shutters in same opening, of any descriptions n.exc 1 Sqm each obtained from dismantling under item no 1 above complete all as specifed and directed. Note:The item for 'refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.,

Refixing of shutters in same opening, of any descriptions exc 1 sqm but.n.exc 2 Sqm each obtained from dismantling under item no 2 above complete all as specified and directed. Note:The item for 'refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.,

Repairs to old steel window af any description having area n exc 1.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting / welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed. Note:- Glass panes and wire mesh shall be measured and paid seperately.

Repairs to old steel window af any description having area exc 1.00 sqm and n exc 2.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting / welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed. Note:- Glass panes and wire mesh shall be measured and paid seperately.

Repairs to old steel window af any description having area exc 2.00 sqm and n exc 4.00 sqm including replacement of unserviceable hinges, handle,beading and necessary fitting / welding to shutter and frames for making window serviceable condition and one coat of synthetic enamel paint complete all as specified and directed. Note:- Glass panes and wire mesh shall be measured and paid seperately.

Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each complete all as specified and directed.

Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and n.exc 2sqm each each complete all as specified and directed.

Resecuring or easing & adjusting with taking down of shutters of any description and refixing in the same opening of area not exc. 1sqm each complete all as specifed and directed.

Resecuring or easing & adjusting with taking down of shutters of any description and refixing in the same opening of area exc. 1sqm and n.exc 2sqm each complete all as specifed and directed.

S&F II class hardwood plain solid straight chowkat and frames wrought framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specifed and directed.

S&F flush shutters 35 mm thick solid core construction with particle board core and 3mm thick BWP Ply wood face panels, commercial type on both sides with 6mm thick hard wood lipping. (Rate for lipping will be measured separetely) complete all as specifed and directed.

S&F I class hard wood of 35mm x 6mm thick lipping to flush shutters complete all as specified and directed.

S&F flush shutter 25 mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick Second class hard wood factory made plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board as directed by Engineer-in-Charge ,supplied and fixed to chowkats complete all as specified and directed.

S&F 2nd class hardwood skeleton door shutters 35mm thick open rebated and prepared to receive glass / gauge etc without sash bars divided in to squares with plain chamfered or with cut and beads for securing glass / gauge etc., complete all as specifed and directed.

All as per item no 19 above but window shutter with sash bars of 30mm thick

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printd PVC sheet reinforced with MS Square tube supply and fixing complete all as specifed and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, supplying & fixing in the frame at site complete all as specifed and directed.

S&F MS hold fast 25x3mm conforming to Fe-410-0 and similar articles complete all as specifed and directed.

Treating small articles such as hold fast using tar or coal tar,black paint area n.exc 0.10 sqm each complete all as specifed and directed.

Preparing surfaces of wood and wood based materials and treating back of chowkets area exc 0.1 sqm and n.exc 0.5 sqm each using tar or coal tar / black bituminous paint complete all as specified and directed.

S&F stainless steel butt hinges ISI marked 100mm long complete all as specified and directed.

S&F in repair stainless steel butt hinges ISI marked 100mm long complete all as specified and directed.

S&F stainless steel butt hinges ISI marked 75 mm long complete all as specified and directed.

S&F in repairs stainless steel butt hinges ISI marked 75 mm long complete all as specified and directed.

S&F MS butt hinges medium weight 100mm long to wooden / steel frame complete all as specified and directed.

S&F in repairs MS butt hinges medium weight 100mm long to wooden / steel frame complete all as specified and directed.

All as per item no 30 above but 75 mm long

All as per item no 31 above but 75 mm long as in repairs.

All as per item no 30 above but 50 mm long

All as per item no 31 above but 50 mm long as in repairs.

S&F 100 mm hasp and staple MS safety stove enamelled black incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 100 mm hasp and staple MS safety stove enamelled black incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F of MS mortice lock 4 levers 100mm size vertical type. Make:- Godrej or other equivalent as approved by G.E

S&F in repairs MS mortice lock 4 levers 100mm size vertical type. Make:- Godrej or other equivalent as approved by G.E

S&F MS sliding door bolt plate type stove enamelled black with bright bolt 12 mm dia and 300mm long including 6 Nos of bolt & Nuts complete all as specified and directed.

S&F in repairs MS sliding door bolt plate type stove enamelled black with bright bolt 12mm dia and 300mm long including 6 Nos of bolt & Nuts complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and directed.

S&F in repairs Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and directed.

All as per item no 44 above but 150mm long complete all as specified and directed.

All as per item no 45 above but 150mm long as in repairs.

All as per item no 44 above but 100 mm long.

All as per item no 45 above but 100 mm long as in repairs.

S&F Aluminium alloy anodised handle cast type 150mm

S&F in repairs Aluminium alloy anodised handle cast type 150mm

All as per item no 51 above but size 100mm

All as per item no 51 above but size 100mm as in repairs

S&F Aluminium plate type II gate and shutters hook & eye 200 mm long

S&F Aluminium plate type II gate and shutters hook & eye 200 mm long fixed in repairs.

S&F Ist class hard wood small fittings (door stopper) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, incl all necessary labours; articles n.exc 200 cu.cm each complete all as specifed and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long

S&F in repairs Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long

Hacking out old broken glass of any qualtity / any thickness from steel / wooden doors, windows,ventilators of any size glazed with putty or fixed with beads with 3mm thick, sheet glass, ordinary quality in squares n.exc 0.50sqm in each pane complete all as specified and directed. .

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S/F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S/F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed to any window/door shutters using stainless steel wire staples/wooden beads etc complete all as specified and directed.

S/F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.18mm fixed to any window/door shutters using stainless steel wire staples/wooden beads etc complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required. depth of embedded portion of holdfasts or lugs easured from the face of the jamb into the wall not exc half brick complete all as specified and directed.

Taking down plaster of any discription in CM incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick (Jambs plaster)on brick work or concrete surface in CM 1:6 finished even and smooth without using extra cementcomplete all as specified and directed.

Preparation of plastered surfaces of wall and applying two coats of Oil bound distember on walls over a coat of primer all as specified and directed

S/F in repairs 2nd class hard wood plain fillets square, rectangular in section wrought secured with nails of sectional area exc 6 Sqcm and n exc 13 Sqcm complete all as specified and directed.

S&F Plain, aluminium sheeting alloy 31000 H4 in stepped flashing (mesured as the minimum rectangle from which the pieces can be cut 0.56 mm thick in repairs

S&F in repair frame work such as grills, gates, gratings etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars confirming to Fe 290 Gde-E-165 with good finish to the existing surfaces.

S&F in repair 300mm size mild steel ordinary rat & tail rod pattern spring (Helical) including roller & roller plate complete all as specified and directed.

Dismantling of mild steel grills not exc 0.5sqm and refixing in the same opening

S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, finials etc (as per sample) suitable for single curtain rod complete all as specified and directed.

Taking down steel rolling shutters pull and push type not exceeding 15 Sqm of clear opening each incl hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing al the moving parts of rolling shutters and straining of rolling shaft, tightening and re-fixing the same incl hood cover complete all as specified.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxidecomplete all as specified and directed.

M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron complete all as specified and directed.

M & L Post constructional Antitermite treatment for ground floor qtrs, area exc 500 sqft and not exc 700 sqFT (a) soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors (b) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. (c) along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron (d) All switch boards and other seen afffected area complete all as specified and directed by Engr in Charge.

M & L Post constructional Antitermite treatment for above then ground floor qtrs, area exc 500 sqft and not exc 700 sqft (a) along internal wall using chemical emulsion @ 0.30 litres per linear metre incl drilling and plugging holes etc in apron (b) At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. (d) All switch boards and other seen afffected area complete all as specified and directed by Engr in Charge.

Supply and fix Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc., complete all as specified

S & F powder coated (50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified

S & F powder coated (50 micron) anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), including fixing of SS wirecloth with necessary fixing arrangements (SS wire cloth is measured and paid seperately) complete all as specified

Supply and fixing factory made pre laminated 18mm thick lead free 100% solid WPC(wood polymer composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen/bedroom cupboard,Cabinet etc . Complete as per direction of Engr-in-charge & Manufacturer's specification.

All as per Srl item No 83 but both side plain without printed.

S & F continous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electrogalvanised in repair

S&F Magnetic catch approved by GE, fixed with nuts and bolts complete all as specifed and directed.

M&L for Zinc finished telescopic drawer channel 18 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specifed and directed

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (cup and saucers basket) storage basket pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (Plate Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (cutlery basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (Grain trolly Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated SS wire basket (AISI 304 gde ) Non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (Bottle pulll out basket) out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed. Note For Sl item No.1 to 93 (a) Supervisor should daily report to both complaint cell (Madambakkam and Narendra Place) and collect complaints and give feedback to complaint cell before 5 pm of same day without fail. (b) The contractor should ensure to fix new joinery window /doors on the same day on which the dismantling of the old one takes place.

Varsa Constructions

sri anjaneyaa construction

vrk constructions