Loading
Loading…
Loading…
| # | Company | Offered Item | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.4 LQualified Make: VERTEL DIGITAL
Model: VERTEL DIGITAL & VL-005 505 ASHOK BHAWAN 93 NEHRU PLACE SOUTH DELHI DELHI 110019 | SOUTH EAST DELHI | DELHI | 110019 | Make: VERTEL DIGITAL
Model: VERTEL DIGITAL & VL-005 | L1 | Qualified | |
| 2 | L2₹4.1 L+₹68,970 (20.4%)Qualified Make: MOTOROLA
Model: MOTOROLA VX 2200 B 902 ANTARIKSH APPARTMENTS DDA ENGINEERS CGHS PLOT NO 26 SECTOR 4 DWARKA NEW DELHI DELHI 110077 | SOUTH WEST DELHI | DELHI | 110077 | Make: MOTOROLA
Model: MOTOROLA VX 2200 | L2 | Qualified |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
14 Sept 2018, 5:00 pmClosed
Experience with Gov. Required 3 Year (s) Analog Transreceiver-Mobile ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values FEATURES Frequency Range (MHz) 136-174 136-174 Types of Bandwidth VHF Full Band VHF Full Band Number of Channels of Transreceiver 256 * Channel Spacing 12.5 * Frequency Spread without degradation in Tx/Rx Specification 38 * Frequency Stability 2.5 * Antenna Impedance 50 * TRANSMITTER RF Power output setting of transmitter Switchable * Maximum Transreceiver RF Power Out put 25 W
±0.5dB * Type of Emission 11 KOF3 * 1/6 Frequency deviation ± 2.5Khz max. for 100% at 1KHz * Modulation Sensitivity 1 to 10mV at 1 KHz at mic. Input for +/- 1.5 KHz standard deviation * Modulation Distortion 5 * Modulation Fidelity +1
3 dB of 6dB octave pre-emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * Spurious & Harmonics Suppression (dB) 60 * VSWR 1.5 * RECEIVER Sensitivity at 12 dB SINAD 0.2 * Squelch Sensitivity of receiver 0.2 * Adjacent Channel Selectivity (dB) 60 * Image Rejection (dB) 65 * Audio Output
(with less than 5 % distortion at 1 KHz reference measured at specified AF output) 1 * Audio Response +1
3 dB of 6dB octave de- emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * ACCESSORIES Antenna Suitable 1/4 wave 0 dB whip Antenna * Programming kit true * Technical repairing & maintenance manual with complete block diagram
circuit layout etc in soft as well as hard copy true * VARIOUS CONFIGURATION FEATURES Simple Press to talk yes * Protection against high VSWR yes * CTCSS or DCS yes * PTT ID Encode true * Busy Channel Lockout true * 2/6 Channel Scanning with call quieting facility true * Selective Call Decode true * Capable of being Killed Unkilled true * Emergency SOS/SIREN true * LCD Display (Min 4 characters) true * Automatic Number Identification (ANI) true * Talk-around true * DTMF Microphone true * Built-in GPS true * Signaling 2Tone
5Tone
DTMF
Digi tal * POWER REQUIREMENTS Power Source 12 V DC * GENERIC Internal Speaker impedance 8 * External Speaker impedance 8 * Output Termination UHF female socket * Built in speaker true * Facility of external speaker true * Weight of Transreceiver with Battery 1.5 * Other features Note- Delivery Period shall be calculated from the date of receipt of valid AIP (Agreement in Principal) letter issued by WPC to the user
is received by us. Without valid AIP in possession by the user
we cannot supply the material
as per the Government of India regulations. * SAFETY Protections Reverse polarity protection & short circuit protection * SERVICE Warranty 2 1
2
3
4
5 OPERATING CONDITION Minimum Operating temperature -10 * 3/6 Maximum Operating temperature 55 * Minimum Storage temperature -40 * Maximum Storage temperature 70 * Humidity non- condensing (at +40 oC ) 95 * TEST REPORT DETAILS conformity to Dry Heat for 16 hrs at a maximum temp in accordance with IS:9 000/part-3/section-5 1977 latest true true
false conformity to Cold Test for 4 hrs at a minimum temp in accordance with IS:9 000/part-2/section-4 1977 latest true true
false conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH in accordance with I S:9000/part-5/sectio n-1/1991 latest true true
false Drop Test (in packed condition): IS 9000 Part VII/SEC
3/1979 (reaffirmed 2004): Six drops one on each face
Height of fall 1000 mm incase of handheld items and 500 mm in case of other items true true
false Vibration Test: IS 9000 Part VIII/1981 (reaffirmed 2006): 12 hours
4 hours along with each axis
at 15-150 Hz and with amplitude of 0-15 mm/2g true true
false Storage Test: IS 9000 Part III/SEC 5/1977 & Part II/SEC 4/1977 (reaffirmed 2004): -40 deg C for true true
false 4/6 5 hours
then raise the temperature to 70 deg C for 16 hours Bump Test: IS 9000 Part VII/SEC 2/1979 (reaffirmed 2004): 4000 bumps at peak acceleration of 400 m/s sq true true
false Availability of the test report from Central Govt/NABL ILAC accredited lab to prove conformity to the specification true true
false If yes test report to furnished
to the buyer on demand Yes * Test Report Number and date for the specification test - * Name and address of the Lab for the specification test - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amarjeet Singh 110060
Central Police Radio Training Institute
Vandemataram Marg
New Delhi - 110060 5 90 2 Ramesh Chandra Khansili 160023
ISPW Station
Sector-24D
Chandigarh 12 90 3 Asis Kumar Banerjee 700084
Garia Garden
P.O. Garia
Kolkata
West Bengal. 13 90
536600
GEM/2018/B/76106
Analog Transreceiver-Mobile
90 days
Delhi; Central Delhi, Delhi; Chandigarh; 24 Paraganas South
PRODUCT
| Item | Delivery Location | Qty | Delivery |
|---|---|---|---|
| Experience with Gov. Required 3 Year (s) Analog Transreceiver-Mobile ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values FEATURES Frequency Range (MHz) 136-174 136-174 Types of Bandwidth VHF Full Band VHF Full Band Number of Channels of Transreceiver 256 * Channel Spacing 12.5 * Frequency Spread without degradation in Tx/Rx Specification 38 * Frequency Stability 2.5 * Antenna Impedance 50 * TRANSMITTER RF Power output setting of transmitter Switchable * Maximum Transreceiver RF Power Out put 25 W | - | - | - |
| ±0.5dB * Type of Emission 11 KOF3 * 1/6 Frequency deviation ± 2.5Khz max. for 100% at 1KHz * Modulation Sensitivity 1 to 10mV at 1 KHz at mic. Input for +/- 1.5 KHz standard deviation * Modulation Distortion 5 * Modulation Fidelity +1 | - | - | - |
| 3 dB of 6dB octave pre-emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * Spurious & Harmonics Suppression (dB) 60 * VSWR 1.5 * RECEIVER Sensitivity at 12 dB SINAD 0.2 * Squelch Sensitivity of receiver 0.2 * Adjacent Channel Selectivity (dB) 60 * Image Rejection (dB) 65 * Audio Output | - | - | - |
| (with less than 5 % distortion at 1 KHz reference measured at specified AF output) 1 * Audio Response +1 | - | - | - |
| 3 dB of 6dB octave de- emphasis charactrestics from 350 Hz to 2700 Hz with 1KHz as reference * ACCESSORIES Antenna Suitable 1/4 wave 0 dB whip Antenna * Programming kit true * Technical repairing & maintenance manual with complete block diagram | - | - | - |
| circuit layout etc in soft as well as hard copy true * VARIOUS CONFIGURATION FEATURES Simple Press to talk yes * Protection against high VSWR yes * CTCSS or DCS yes * PTT ID Encode true * Busy Channel Lockout true * 2/6 Channel Scanning with call quieting facility true * Selective Call Decode true * Capable of being Killed Unkilled true * Emergency SOS/SIREN true * LCD Display (Min 4 characters) true * Automatic Number Identification (ANI) true * Talk-around true * DTMF Microphone true * Built-in GPS true * Signaling 2Tone | - | - | - |
| 5Tone | - | - | - |
| DTMF | - | - | - |
| Digi tal * POWER REQUIREMENTS Power Source 12 V DC * GENERIC Internal Speaker impedance 8 * External Speaker impedance 8 * Output Termination UHF female socket * Built in speaker true * Facility of external speaker true * Weight of Transreceiver with Battery 1.5 * Other features Note- Delivery Period shall be calculated from the date of receipt of valid AIP (Agreement in Principal) letter issued by WPC to the user | - | - | - |
| is received by us. Without valid AIP in possession by the user | - | - | - |
| we cannot supply the material | - | - | - |
| as per the Government of India regulations. * SAFETY Protections Reverse polarity protection & short circuit protection * SERVICE Warranty 2 1 | - | - | - |
| 2 | - | - | - |
| 3 | - | - | - |
| 4 | - | - | - |
| 5 OPERATING CONDITION Minimum Operating temperature -10 * 3/6 Maximum Operating temperature 55 * Minimum Storage temperature -40 * Maximum Storage temperature 70 * Humidity non- condensing (at +40 oC ) 95 * TEST REPORT DETAILS conformity to Dry Heat for 16 hrs at a maximum temp in accordance with IS:9 000/part-3/section-5 1977 latest true true | - | - | - |
| false conformity to Cold Test for 4 hrs at a minimum temp in accordance with IS:9 000/part-2/section-4 1977 latest true true | - | - | - |
| false conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH in accordance with I S:9000/part-5/sectio n-1/1991 latest true true | - | - | - |
| false Drop Test (in packed condition): IS 9000 Part VII/SEC | - | - | - |
| 3/1979 (reaffirmed 2004): Six drops one on each face | - | - | - |
| Height of fall 1000 mm incase of handheld items and 500 mm in case of other items true true | - | - | - |
| false Vibration Test: IS 9000 Part VIII/1981 (reaffirmed 2006): 12 hours | - | - | - |
| 4 hours along with each axis | - | - | - |
| at 15-150 Hz and with amplitude of 0-15 mm/2g true true | - | - | - |
| false Storage Test: IS 9000 Part III/SEC 5/1977 & Part II/SEC 4/1977 (reaffirmed 2004): -40 deg C for true true | - | - | - |
| false 4/6 5 hours | - | - | - |
| then raise the temperature to 70 deg C for 16 hours Bump Test: IS 9000 Part VII/SEC 2/1979 (reaffirmed 2004): 4000 bumps at peak acceleration of 400 m/s sq true true | - | - | - |
| false Availability of the test report from Central Govt/NABL ILAC accredited lab to prove conformity to the specification true true | - | - | - |
| false If yes test report to furnished | - | - | - |
| to the buyer on demand Yes * Test Report Number and date for the specification test - * Name and address of the Lab for the specification test - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amarjeet Singh 110060 | - | - | - |
| Central Police Radio Training Institute | - | - | - |
| Vandemataram Marg | - | - | - |
| New Delhi - 110060 5 90 2 Ramesh Chandra Khansili 160023 | - | - | - |
| ISPW Station | - | - | - |
| Sector-24D | - | - | - |
| Chandigarh 12 90 3 Asis Kumar Banerjee 700084 | - | - | - |
| Garia Garden | - | - | - |
| P.O. Garia | - | - | - |
| Kolkata | - | - | - |
| West Bengal. 13 90 | - | - | - |
Exempted
14 Sept 2018
22 Sept 2018
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_536600.pdf
GEM_BID
termsCondition.pdf
OTHER
2657c7ca70287299b5181580fdb5a7ab.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .